[cubietruck] [debian] 5.5.0-0.bpo.2-armmp-lpae KO

Discussions sur les cartes "Cubie" (1, 2, CubieTruck, etc.)
http://www.cubietech.com/
Répondre
jeanmarc
Messages : 40
Enregistré le : dim. mars 22, 2020 5:28 pm
Localisation : Essonne

[cubietruck] [debian] 5.5.0-0.bpo.2-armmp-lpae KO

Message par jeanmarc »

Bonjour,

Après 2 semaines de bons et loyaux services......

Code : Tout sélectionner



U-Boot SPL 2019.01+dfsg-7 (May 14 2019 - 02:07:44 +0000)
DRAM: 2048 MiB
CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC1


U-Boot 2019.01+dfsg-7 (May 14 2019 - 02:07:44 +0000) Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
Model: Cubietech Cubietruck
I2C:   ready
DRAM:  2 GiB
MMC:   SUNXI SD/MMC: 0
Loading Environment from FAT... Unable to use mmc 0:1... Setting up a 1024x768 vga console (overscan 0x0)
In:    serial
Out:   vga
Err:   vga
Allwinner mUSB OTG (Peripheral)
SCSI:  Target spinup took 0 ms.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst 

Net:   eth0: ethernet@1c50000
Warning: usb_ether using MAC address from ROM
, eth1: usb_ether
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
USB2:   USB EHCI 1.00
USB3:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  2  1  0 
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
2730 bytes read in 26 ms (102.5 KiB/s)
## Executing script at 43100000
Mainline u-boot / new-style environment detected.
4817408 bytes read in 285 ms (16.1 MiB/s)
27246 bytes read in 34 ms (782.2 KiB/s)
22942756 bytes read in 1297 ms (16.9 MiB/s)
Booting Debian 5.5.0-0.bpo.2-armmp-lpae from mmc 0:1...
## Flattened Device Tree blob at 43000000
   Booting using the fdt blob at 0x43000000
EHCI failed to shut down host controller.
EHCI failed to shut down host controller.
   Loading Ramdisk to 48a1e000, end 49fff424 ... OK
   Loading Device Tree to 48a14000, end 48a1da6d ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.5.0-0.bpo.2-armmp-lpae (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 5.5.17-1~bpo10+1 (2020-04-23)
[    0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=30c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Cubietech Cubietruck
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x000000004a000000, size 96 MiB
[    0.000000] OF: reserved mem: initialized node default-pool, compatible id shared-dma-pool
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] percpu: Embedded 21 pages/cpu s54028 r8192 d23796 u86016
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 521216
[    0.000000] Kernel command line: console=ttyS0,115200 root=UUID=dbb519b6-74f7-4d14-a989-cd7e298b118f net.ifnames=0 apparmor=0 cgroup_enable=memory loglevel=7
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x6a6ca000-0x6e6ca000] (64MB)
[    0.000000] Memory: 1863644K/2094080K available (10240K kernel code, 1226K rwdata, 3156K rodata, 2048K init, 332K bss, 132132K reserved, 98304K cma-reserved, 1307648K highmem)
[    0.000000] random: get_random_u32 called from __kmem_cache_create+0x44/0x518 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] ftrace: allocating 36672 entries in 72 pages
[    0.000000] ftrace: allocated 72 pages with 2 groups
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000022] Switching to timer-based delay loop, resolution 41ns
[    0.001620] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.002773] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370868154 ns
[    0.003663] Console: colour dummy device 80x30
[    0.003741] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.003761] pid_max: default: 32768 minimum: 301
[    0.004134] LSM: Security Framework initializing
[    0.004259] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.004322] SELinux:  Initializing.
[    0.004465] TOMOYO Linux initialized
[    0.004579] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.004598] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.006135] CPU: Testing write buffer coherency: ok
[    0.006857] /cpus/cpu@0 missing clock-frequency property
[    0.006888] /cpus/cpu@1 missing clock-frequency property
[    0.006902] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.007827] Setting up static identity map for 0x40400000 - 0x404000ac
[    0.009327] rcu: Hierarchical SRCU implementation.
[    0.013342] EFI services will not be available.
[    0.014031] smp: Bringing up secondary CPUs ...
[    0.025165] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.025415] smp: Brought up 1 node, 2 CPUs
[    0.025435] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[    0.025443] CPU: All CPU(s) started in HYP mode.
[    0.025449] CPU: Virtualization extensions available.
[    0.027252] devtmpfs: initialized
[    0.036882] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[    0.037657] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.037697] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.043095] pinctrl core: initialized pinctrl subsystem
[    0.044821] thermal_sys: Registered thermal governor 'fair_share'
[    0.044828] thermal_sys: Registered thermal governor 'step_wise'
[    0.045481] DMI not present or invalid.
[    0.046137] NET: Registered protocol family 16
[    0.049159] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.050458] audit: initializing netlink subsys (disabled)
[    0.052915] No ATAGs?
[    0.053051] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[    0.053111] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.053121] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.054508] Serial: AMBA PL011 UART driver
[    0.080938] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    1.671568] iommu: Default domain type: Translated 
[    1.672910] vgaarb: loaded
[    1.674338] mc: Linux media interface: v0.10
[    1.674402] videodev: Linux video capture interface: v2.00
[    1.674472] pps_core: LinuxPPS API ver. 1 registered
[    1.674480] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.674516] PTP clock support registered
[    1.677531] clocksource: Switched to clocksource arch_sys_counter
[    1.786195] VFS: Disk quotas dquot_6.6.0
[    1.786316] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.787997] simple-framebuffer bfd00000.framebuffer: framebuffer at 0xbfd00000, 0x300000 bytes, mapped to 0x(ptrval)
[    1.788021] simple-framebuffer bfd00000.framebuffer: format=x8r8g8b8, mode=1024x768x32, linelength=4096
[    1.802696] Console: switching to colour frame buffer device 128x48
[    1.816386] simple-framebuffer bfd00000.framebuffer: fb0: simplefb registered!
[    1.830839] NET: Registered protocol family 2
[    1.831961] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    1.832009] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    1.832093] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.832221] TCP: Hash tables configured (established 8192 bind 8192)
[    1.832394] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.832466] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.832820] NET: Registered protocol family 1
[    1.832864] NET: Registered protocol family 44
[    1.832887] PCI: CLS 0 bytes, default 64
[    1.833948] Trying to unpack rootfs image as initramfs...
[    3.715298] Freeing initrd memory: 22408K
[    3.716443] kvm [1]: vgic interrupt IRQ16
[    3.716677] kvm [1]: Hyp mode initialized successfully
[    3.718020] hw perfevents: no interrupt-affinity property for /pmu, guessing.
[    3.718332] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    3.720997] Initialise system trusted keyrings
[    3.721086] Key type blacklist registered
[    3.721686] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    3.732753] zbud: loaded
[    3.735194] Platform Keyring initialized
[    3.735238] Key type asymmetric registered
[    3.735249] Asymmetric key parser 'x509' registered
[    3.735330] bounce: pool size: 64 pages
[    3.735436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    3.735880] io scheduler mq-deadline registered
[    3.742747] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pi not found, using dummy regulator
[    3.745373] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    3.768239] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    3.771624] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pb not found, using dummy regulator
[    3.772417] printk: console [ttyS0] disabled
[    3.792793] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 50, base_baud = 1500000) is a U6_16550A
[    4.549832] printk: console [ttyS0] enabled
[    4.575884] 1c28800.serial: ttyS1 at MMIO 0x1c28800 (irq = 51, base_baud = 1500000) is a U6_16550A
[    4.585212] serial serial0: tty port ttyS1 registered
[    4.591328] Serial: AMBA driver
[    4.596515] STM32 USART driver initialized
[    4.604773] libphy: Fixed MDIO Bus: probed
[    4.610032] mousedev: PS/2 mouse device common for all mice
[    4.619142] sunxi-rtc 1c20d00.rtc: registered as rtc0
[    4.627864] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-ph not found, using dummy regulator
[    4.638589] ledtrig-cpu: registered to indicate activity on CPUs
[    4.646032] drop_monitor: Initializing network drop monitor service
[    4.653591] NET: Registered protocol family 10
[    4.756770] Segment Routing with IPv6
[    4.760706] mip6: Mobile IPv6
[    4.763746] NET: Registered protocol family 17
[    4.768572] mpls_gso: MPLS GSO support
[    4.772572] ThumbEE CPU extension supported.
[    4.776952] Registering SWP/SWPB emulation handler
[    4.782444] registered taskstats version 1
[    4.786620] Loading compiled-in X.509 certificates
[    5.166347] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    5.175266] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[    5.181940] zswap: loaded using pool lzo/zbud
[    5.187287] Key type ._fscrypt registered
[    5.191390] Key type .fscrypt registered
[    5.219856] sunxi-rtc 1c20d00.rtc: setting system clock to 2020-06-09T18:06:09 UTC (1591725969)
[    5.242180] Freeing unused kernel memory: 2048K
[    5.249604] Checked W+X mappings: passed, no W+X pages found
[    5.255309] Run /init as init process
Loading, please wait...
Starting version 241
sd-device-enumerator: Scanning /sys/bus
sd-device-enumerator: Scan all dirs
sd-device-enumerator: Scanning /sys/bus
sd-device-enumerator: Scanning /sys/class
[    6.217875] sunxi_mmc: module verification failed: signature and/or required key missing - tainting kernel
[    6.234331] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator
[    6.270480] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    6.303088] usbcore: registered new interface driver usbfs
[    6.309025] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
[    6.324043] usbcore: registered new interface driver hub
[    6.335184] sunxi-mmc 1c12000.mmc: allocated mmc-pwrseq
[    6.337911] SCSI subsystem initialized
[    6.343294] usbcore: registered new device driver usb
[    6.373128] sunxi-mmc 1c12000.mmc: initialized, max. request size: 16384 KB
[    6.377311] axp20x-i2c 0-0034: AXP20x variant AXP209 found
[    6.390670] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.415211] mmc0: host does not support reading read-only switch, assuming write-enable
[    6.446445] mmc0: Problem switching card into high-speed mode!
[    6.453427] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    6.463939] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.472039] ehci-platform: EHCI generic platform driver
[    6.500238] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    6.523976] ohci-platform: OHCI generic platform driver
[    6.524470] axp20x-i2c 0-0034: AXP20X driver loaded
[    6.533995] mmc0: new SDHC card at address 0001
[    6.567168] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    6.581824] ahci-sunxi 1c18000.sata: 1c18000.sata supply ahci not found, using dummy regulator
[    6.588142] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pa not found, using dummy regulator
[    6.603456] ahci-sunxi 1c18000.sata: 1c18000.sata supply phy not found, using dummy regulator
[    6.618121] mmcblk0: mmc0:0001 SDU8G 7.32 GiB 
[    6.629377] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    6.654359] sun7i-dwmac 1c50000.ethernet: IRQ eth_wake_irq not found
[    6.654959]  mmcblk0: p1
[    6.660840] sun7i-dwmac 1c50000.ethernet: IRQ eth_lpi not found
[    6.676369] random: fast init done
[    6.677322] sun7i-dwmac 1c50000.ethernet: PTP uses main clock
[    6.682224] mmc1: new high speed SDIO card at address 0001
[    6.685752] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[    6.698761] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
[    6.710730] sun7i-dwmac 1c50000.ethernet: no reset control found
[    6.722508] sun7i-dwmac 1c50000.ethernet: no regulator found
[    6.728400] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    6.737411] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc 
[    6.738053] sun7i-dwmac 1c50000.ethernet: Version ID not available
[    6.753334] sun7i-dwmac 1c50000.ethernet: 	DWMAC1000
[    6.758492] sun7i-dwmac 1c50000.ethernet: DMA HW capability register supported
[    6.765804] sun7i-dwmac 1c50000.ethernet: Normal descriptors
[    6.771551] sun7i-dwmac 1c50000.ethernet: Ring mode enabled
[    6.779430] libphy: stmmac: probed
[    6.817757] scsi host0: ahci-sunxi
[    6.822310] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 37
[    6.845697] axp20x-gpio axp20x-gpio: DMA mask not set
[    6.845837] ldo1: supplied by regulator-dummy
[    6.855709] axp20x-gpio axp20x-gpio: AXP209 pinctrl and GPIO driver loaded
[    6.896374] ldo2: supplied by regulator-dummy
[    6.903103] axp20x-usb-power-supply axp20x-usb-power-supply: DMA mask not set
[    6.912386] ldo3: supplied by regulator-dummy
[    6.921300] ldo4: supplied by regulator-dummy
[    6.930562] ldo5: supplied by regulator-dummy
[    6.938499] dcdc2: supplied by regulator-dummy
[    6.945051] sun7i-dwmac 1c50000.ethernet et-prod: renamed from eth0
[    6.953822] dcdc3: supplied by regulator-dummy
[    7.144411] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    7.150997] ata1.00: ATA-9: CJ325120JC, 1.094.12, max UDMA/100
[    7.156990] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32)
[    7.163856] ata1.00: configured for UDMA/100
[    7.168977] scsi 0:0:0:0: Direct-Access     ATA      CJ325120JC       4.12 PQ: 0 ANSI: 5
[    7.194452] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    7.202359] sd 0:0:0:0: [sda] Write Protect is off
[    7.207615] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.243406]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 >
[    7.264595] sd 0:0:0:0: [sda] Attached SCSI disk
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.33.1
[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1 
/dev/mmcblk0p1: recovering journal
[   35.817562] vcc3v0: disabling
[   35.820552] vcc5v0: disabling
[   35.823558] usb0-vbus: disabling
[   35.826806] usb1-vbus: disabling
[   35.830054] usb2-vbus: disabling
[  242.665573] INFO: task kworker/1:1H:142 blocked for more than 120 seconds.
[  242.672483]       Tainted: G            E     5.5.0-0.bpo.2-armmp-lpae #1 Debian 5.5.17-1~bpo10+1
[  242.681359] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  242.689193] kworker/1:1H    D    0   142      2 0x00000000
[  242.694720] Workqueue: kblockd blk_mq_run_work_fn
[  242.699437] Backtrace: 
[  242.701916] [<c0d44d28>] (__schedule) from [<c0d45658>] (schedule+0x74/0xf8)
[  242.708981]  r10:c9815a00 r9:e9ea8ab0 r8:e9e1bd78 r7:c1405fd4 r6:e9ea8a84 r5:e9abe900
[  242.716831]  r4:ffffe000
[  242.719396] [<c0d455e4>] (schedule) from [<c0b425b4>] (mmc_blk_rw_wait+0x134/0x13c)
[  242.727066]  r5:00000001 r4:e9ea8a08
[  242.730666] [<c0b42480>] (mmc_blk_rw_wait) from [<c0b431ac>] (mmc_blk_mq_issue_rq+0x338/0x8e0)
[  242.739294]  r9:e9ee6400 r8:e9ee6400 r7:00000000 r6:e9ea8a08 r5:c9815ab0 r4:c1405fd4
[  242.747055] [<c0b42e74>] (mmc_blk_mq_issue_rq) from [<c0b43d3c>] (mmc_mq_queue_rq+0x144/0x268)
[  242.755678]  r10:00000000 r9:e9ee6400 r8:e9ea8a84 r7:e981b800 r6:e9ea8a10 r5:c9815a00
[  242.763513]  r4:e9ea8a08
[  242.766080] [<c0b43bf8>] (mmc_mq_queue_rq) from [<c08089d4>] (blk_mq_dispatch_rq_list+0x27c/0x62c)
[  242.775052]  r10:c9801d60 r9:00000000 r8:c9815a00 r7:00000000 r6:e9ec2800 r5:e9e1be5c
[  242.782889]  r4:c9815a30
[  242.785433] [<c0808758>] (blk_mq_dispatch_rq_list) from [<c080e150>] (blk_mq_do_dispatch_sched+0x80/0x120)
[  242.795096]  r10:c9815a30 r9:c9801d60 r8:e9ea9e00 r7:e9e1be5c r6:e9e1be5c r5:c9815a00
[  242.802931]  r4:e9ec2800
[  242.805470] [<c080e0d0>] (blk_mq_do_dispatch_sched) from [<c080e8f4>] (blk_mq_sched_dispatch_requests+0x13c/0x1a4)
[  242.815826]  r10:00000000 r9:c9801d60 r8:e9ec2804 r7:e9e1be9c r6:c1405fd4 r5:00000001
[  242.823660]  r4:e9ec2800
[  242.826217] [<c080e7b8>] (blk_mq_sched_dispatch_requests) from [<c0805f94>] (__blk_mq_run_hw_queue+0x100/0x1b4)
[  242.836312]  r9:00000060 r8:00000000 r7:ee7b1700 r6:00000001 r5:e9ec2948 r4:e9ec2800
[  242.844069] [<c0805e94>] (__blk_mq_run_hw_queue) from [<c0806070>] (blk_mq_run_work_fn+0x28/0x2c)
[  242.852949]  r7:ee7b1700 r6:ee7ac500 r5:e9f65580 r4:e9ec2840
[  242.858632] [<c0806048>] (blk_mq_run_work_fn) from [<c049a0f8>] (process_one_work+0x1dc/0x4fc)
[  242.867265] [<c0499f1c>] (process_one_work) from [<c049a478>] (worker_thread+0x60/0x55c)
[  242.875368]  r10:ee7ac500 r9:c1404d00 r8:ee7ac518 r7:00000008 r6:ee7ac500 r5:e9f65594
[  242.883200]  r4:e9f65580
[  242.885756] [<c049a418>] (worker_thread) from [<c04a147c>] (kthread+0x170/0x174)
[  242.893165]  r10:e9951e74 r9:c049a418 r8:e9f65580 r7:e9e1a000 r6:00000000 r5:e9f64540
[  242.901001]  r4:c9950e80
[  242.903554] [<c04a130c>] (kthread) from [<c04011f8>] (ret_from_fork+0x14/0x3c)
[  242.910785] Exception stack(0xe9e1bfb0 to 0xe9e1bff8)
[  242.915850] bfa0:                                     00000000 00000000 00000000 00000000
[  242.924039] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  242.932224] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[  242.938851]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c04a130c
[  242.946686]  r4:e9f64540
[  242.949277] INFO: task fsck.ext4:160 blocked for more than 121 seconds.
[  242.949286]       Tainted: G            E     5.5.0-0.bpo.2-armmp-lpae #1 Debian 5.5.17-1~bpo10+1
[  242.964779] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  242.972613] fsck.ext4       D    0   160    159 0x00000000
[  242.978110] Backtrace: 
[  242.980568] [<c0d44d28>] (__schedule) from [<c0d45658>] (schedule+0x74/0xf8)
[  242.987636]  r10:00008000 r9:c14054f4 r8:ee995710 r7:c99a7df4 r6:c14054f0 r5:e994bc00
[  242.995472]  r4:ffffe000
[  242.998027] [<c0d455e4>] (schedule) from [<c0d45b88>] (io_schedule+0x20/0x40)
[  243.005171]  r5:c14054f4 r4:00000000
[  243.008769] [<c0d45b68>] (io_schedule) from [<c05fd72c>] (wait_on_page_bit+0x220/0x2b8)
[  243.016788]  r5:c14054f4 r4:ee995710
[  243.020388] [<c05fd50c>] (wait_on_page_bit) from [<c0608238>] (wait_on_page_writeback+0x4c/0xc4)
[  243.029185]  r10:c1405fd4 r9:00000001 r8:c901ba58 r7:ffffffff r6:c901ba58 r5:c99a7e60
[  243.037020]  r4:ee995710
[  243.039572] [<c06081ec>] (wait_on_page_writeback) from [<c05fb740>] (__filemap_fdatawait_range+0xa4/0x108)
[  243.049230]  r7:ffffffff r6:c99a7e98 r5:c99a7e60 r4:ee995710
[  243.054904] [<c05fb69c>] (__filemap_fdatawait_range) from [<c0601888>] (file_write_and_wait_range+0x98/0xb4)
[  243.064740]  r10:00000076 r9:00000000 r8:00000000 r7:7fffffff r6:e9e18b40 r5:c901ba58
[  243.072573]  r4:00000000
[  243.075128] [<c06017f0>] (file_write_and_wait_range) from [<c06ef89c>] (blkdev_fsync+0x2c/0x58)
[  243.083835]  r9:c99a6000 r8:c0401324 r6:c901b948 r5:7fffffff r4:ffffffff
[  243.090558] [<c06ef870>] (blkdev_fsync) from [<c06e37d4>] (vfs_fsync_range+0x4c/0x8c)
[  243.098398]  r6:ffffffff r5:00000000 r4:e9e18b40
[  243.103033] [<c06e3788>] (vfs_fsync_range) from [<c06e389c>] (do_fsync+0x4c/0x80)
[  243.110524]  r7:00000076 r6:00000000 r5:e9e18b40 r4:e9e18b40
[  243.116206] [<c06e3850>] (do_fsync) from [<c06e3b64>] (sys_fsync+0x1c/0x20)
[  243.123178]  r6:016a3840 r5:be8e47a8 r4:01696830
[  243.127809] [<c06e3b48>] (sys_fsync) from [<c0401120>] (ret_fast_syscall+0x0/0x4c)
[  243.135386] Exception stack(0xc99a7fa8 to 0xc99a7ff0)
[  243.140451] 7fa0:                   01696830 be8e47a8 00000004 01696830 00000074 00000000
[  243.148637] 7fc0: 01696830 be8e47a8 016a3840 00000076 be8e48e4 00001000 b6eea2cc 004caa1c
[  243.156819] 7fe0: 00000076 be8e4788 b6da7bff b6d29746
[  363.497585] INFO: task kworker/1:1H:142 blocked for more than 241 seconds.
[  363.504494]       Tainted: G            E     5.5.0-0.bpo.2-armmp-lpae #1 Debian 5.5.17-1~bpo10+1
[  363.513372] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  363.521206] kworker/1:1H    D    0   142      2 0x00000000
[  363.526734] Workqueue: kblockd blk_mq_run_work_fn
[  363.531451] Backtrace: 
[  363.533926] [<c0d44d28>] (__schedule) from [<c0d45658>] (schedule+0x74/0xf8)
[  363.540988]  r10:c9815a00 r9:e9ea8ab0 r8:e9e1bd78 r7:c1405fd4 r6:e9ea8a84 r5:e9abe900
[  363.548824]  r4:ffffe000
[  363.551380] [<c0d455e4>] (schedule) from [<c0b425b4>] (mmc_blk_rw_wait+0x134/0x13c)
[  363.559043]  r5:00000001 r4:e9ea8a08
[  363.562640] [<c0b42480>] (mmc_blk_rw_wait) from [<c0b431ac>] (mmc_blk_mq_issue_rq+0x338/0x8e0)
[  363.571261]  r9:e9ee6400 r8:e9ee6400 r7:00000000 r6:e9ea8a08 r5:c9815ab0 r4:c1405fd4
[  363.579018] [<c0b42e74>] (mmc_blk_mq_issue_rq) from [<c0b43d3c>] (mmc_mq_queue_rq+0x144/0x268)
[  363.587638]  r10:00000000 r9:e9ee6400 r8:e9ea8a84 r7:e981b800 r6:e9ea8a10 r5:c9815a00
[  363.595471]  r4:e9ea8a08
[  363.598036] [<c0b43bf8>] (mmc_mq_queue_rq) from [<c08089d4>] (blk_mq_dispatch_rq_list+0x27c/0x62c)
[  363.607005]  r10:c9801d60 r9:00000000 r8:c9815a00 r7:00000000 r6:e9ec2800 r5:e9e1be5c
[  363.614839]  r4:c9815a30
[  363.617380] [<c0808758>] (blk_mq_dispatch_rq_list) from [<c080e150>] (blk_mq_do_dispatch_sched+0x80/0x120)
[  363.627042]  r10:c9815a30 r9:c9801d60 r8:e9ea9e00 r7:e9e1be5c r6:e9e1be5c r5:c9815a00
[  363.634880]  r4:e9ec2800
[  363.637419] [<c080e0d0>] (blk_mq_do_dispatch_sched) from [<c080e8f4>] (blk_mq_sched_dispatch_requests+0x13c/0x1a4)
[  363.647775]  r10:00000000 r9:c9801d60 r8:e9ec2804 r7:e9e1be9c r6:c1405fd4 r5:00000001
[  363.655609]  r4:e9ec2800
[  363.658163] [<c080e7b8>] (blk_mq_sched_dispatch_requests) from [<c0805f94>] (__blk_mq_run_hw_queue+0x100/0x1b4)
[  363.668257]  r9:00000060 r8:00000000 r7:ee7b1700 r6:00000001 r5:e9ec2948 r4:e9ec2800
[  363.676013] [<c0805e94>] (__blk_mq_run_hw_queue) from [<c0806070>] (blk_mq_run_work_fn+0x28/0x2c)
[  363.684891]  r7:ee7b1700 r6:ee7ac500 r5:e9f65580 r4:e9ec2840
[  363.690566] [<c0806048>] (blk_mq_run_work_fn) from [<c049a0f8>] (process_one_work+0x1dc/0x4fc)
[  363.699199] [<c0499f1c>] (process_one_work) from [<c049a478>] (worker_thread+0x60/0x55c)
[  363.707301]  r10:ee7ac500 r9:c1404d00 r8:ee7ac518 r7:00000008 r6:ee7ac500 r5:e9f65594
[  363.715134]  r4:e9f65580
[  363.717688] [<c049a418>] (worker_thread) from [<c04a147c>] (kthread+0x170/0x174)
[  363.725095]  r10:e9951e74 r9:c049a418 r8:e9f65580 r7:e9e1a000 r6:00000000 r5:e9f64540
[  363.732929]  r4:c9950e80
[  363.735478] [<c04a130c>] (kthread) from [<c04011f8>] (ret_from_fork+0x14/0x3c)
[  363.742710] Exception stack(0xe9e1bfb0 to 0xe9e1bff8)
[  363.747775] bfa0:                                     00000000 00000000 00000000 00000000
[  363.755961] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  363.764144] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[  363.770769]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c04a130c
[  363.778601]  r4:e9f64540
[  363.781138] INFO: task fsck.ext4:160 blocked for more than 241 seconds.
[  363.787761]       Tainted: G            E     5.5.0-0.bpo.2-armmp-lpae #1 Debian 5.5.17-1~bpo10+1
[  363.796632] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  363.804471] fsck.ext4       D    0   160    159 0x00000000
[  363.809967] Backtrace: 
[  363.812423] [<c0d44d28>] (__schedule) from [<c0d45658>] (schedule+0x74/0xf8)
[  363.819484]  r10:00008000 r9:c14054f4 r8:ee995710 r7:c99a7df4 r6:c14054f0 r5:e994bc00
[  363.827318]  r4:ffffe000
[  363.829871] [<c0d455e4>] (schedule) from [<c0d45b88>] (io_schedule+0x20/0x40)
[  363.837012]  r5:c14054f4 r4:00000000
[  363.840608] [<c0d45b68>] (io_schedule) from [<c05fd72c>] (wait_on_page_bit+0x220/0x2b8)
[  363.848622]  r5:c14054f4 r4:ee995710
[  363.852221] [<c05fd50c>] (wait_on_page_bit) from [<c0608238>] (wait_on_page_writeback+0x4c/0xc4)
[  363.861016]  r10:c1405fd4 r9:00000001 r8:c901ba58 r7:ffffffff r6:c901ba58 r5:c99a7e60
[  363.868849]  r4:ee995710
[  363.871402] [<c06081ec>] (wait_on_page_writeback) from [<c05fb740>] (__filemap_fd







Aie !
Si vous avez quelques idées ?
:evil:
Modifié en dernier par jeanmarc le sam. juil. 04, 2020 1:43 pm, modifié 3 fois.
Cordialement

-W.-
Messages : 45
Enregistré le : dim. mars 22, 2020 5:26 pm
Localisation : Allier

Re: [cubietruck] [debian] 5.5.0-0.bpo.2-armmp-lpae KO

Message par -W.- »

Bonsoir,

Mes premières questions seraient de savoi si c'est reproductible ou aléatoire ?
Est arrivé une seule fois au bout de deux semaines ?

Et bien sur qu'elle est l'image utilisée, cela pourrait aider :evil: La stack trace seule sans plus de contexte c'est un peu hard :D

@+

jeanmarc
Messages : 40
Enregistré le : dim. mars 22, 2020 5:28 pm
Localisation : Essonne

Re: [cubietruck] [debian] 5.5.0-0.bpo.2-armmp-lpae KO

Message par jeanmarc »

Merci pour cette remarque.

La reproductibilité est garantie dans le mesure ou l'équipement ne peut plus booter.
Après plusieurs reboot, le phénomène persiste. :twisted:
Du coup je me rappelle avoir eu il y a longtemps ce genre de soucis lorsque mes SD étaient de type non classe 10 (!).
En analysant de plus prêt la nature de ma SD sur cet équipement, un doute m'a envahit (!) concernant le modèle de la SD mise en œuvre. Pour mémoire, pour des raisons historiques, je démarre toujours la Cubietruck sur la SD, bien qu'il y ait un SSD, car c'est la configuration historique de Cubie.

Concernant la SD utilisée en cours, c'est une version en provenance du tiroir (!), soit une PNY 8Go HCI sans aucune spécification de type CLASS 10.

Je vais donc la remplacer par une SANDISK ultra 16Go (A1). Sur ces modèles, je n'ai pas de soucis à priori sur les autres équipements.
Par ailleurs, devant refaire une image depuis l'origine, je repars donc de la dernière version de Jérôme sur le projet vm-db2 avec la version GIT suivante:

Code : Tout sélectionner

Merge: ee2575b 53bcbb6
Author: ansible user (ansible@asus-190) with sudo access <ansible@asus-190-user.noip.jml>
Date:   Wed Jun 10 11:50:09 2020 +0200

    Merge remote-tracking branch 'origin/master' into jml-integration

commit 53bcbb633f606bc7792a1b90c59644c9afce988c (origin/work, origin/master, origin/HEAD)
Author: J<C3><A9>r<C3><B4>me Maurin <j@jmaurin.ovh>
Date:   Sat May 23 18:42:25 2020 +0200

    Odroid N2 on eMMC: using BayLibre LibreTech CC u-boot (untested)

La fabrication de l'image est décrite dans la célèbre documentation du projet (!) :lol:

Code : Tout sélectionner

ansible@asus-190:~/git/vmdb2-wrapper.git$ head --line 1 cubietruck_buster_armhf_vmdb2-0.14.1.yaml
# Use like this : sudo vmdb2 cubietruck_buster_armhf_vmdb2-0.14.1.yaml --output cubietruck_buster_armhf.img --rootfs-tarball 
ansible@asus-190:~/git/vmdb2-wrapper.git$ 
... que je complète de la manière suivante :

Code : Tout sélectionner

time sudo \
   vmdb2 \
      cubietruck_buster_armhf_vmdb2-0.14.1.yaml \
      --output cubietruck_buster_armhf.img \
      --rootfs-tarball buster_armhf_rootfs.tgz \
      --log=stderr  \
       2>&1 \
       | \
       tee \
       /tmp/vmdb2_build_cubietruck_debian_buster.log.txt

Concernant le résultat du time , il est de ...

Code : Tout sélectionner

......
INFO vmdb2 version 0.14.1 ends normally

real    6m27,116s
user    4m13,785s
sys     0m22,037s
ansible@asus-190:~/git/vmdb2-wrapper.git$ 
Sachant que je dispose d'un cache de type apt-cacher (cf paquet Debian) hébergé sur une Odroid HC1 dans un container LXC (avec affinité CPU limitée à 1 coeur), que l'équipement de production est un octo coeurs I7, que l'accès réseau Internet est basé sur une liaison LTE (40 Mbit/sec RX / 10 Mbit/sec TX )au fin fond de la France (!) plus ou moins bien maîtrisée en terme de flux (Nos amis les opérateurs...), je ne suis pas sure que ce résultat soit intéressant. Disons plus simplement qu'il donne un état des lieux de ce que l'on peut obtenir pour ceux d'entre vous qui ne sont pas connectés en direct sur la fibre ...

Après quelques temps pour produire l'image, le résultat des logs de la production est le suivant : (version 2 fichiers, car les logs sont limités en taille sur Armwizard. La commande suivante permet dans un premier temps de numéroter toutes les lignes du fichier (à faible effort :D)

Code : Tout sélectionner

 cat -n  \
   /tmp/vmdb2_build_cubietruck_debian_buster.log.txt  \
    >  \
   /tmp/vmdb2_build_cubietruck_debian_buster.log.txt.ok
 

LOG fichier 1/2

Code : Tout sélectionner

     1	INFO vmdb2 version 0.14.1 starts
     2	DEBUG sys.argv: ['/usr/bin/vmdb2', 'cubietruck_buster_armhf_vmdb2-0.14.1.yaml', '--output', 'cubietruck_buster_armhf.img', '--rootfs-tarball', 'buster_armhf_rootfs.tgz', '--log=stderr']
     3	DEBUG current working directory: /home/ansible/git/vmdb2-wrapper.git
     4	DEBUG uid: 0
     5	DEBUG effective uid: 0
     6	DEBUG gid: 0
     7	DEBUG effective gid: 0
     8	DEBUG environment variables:
     9	DEBUG environment: LANGUAGE=fr_FR.UTF-8
    10	DEBUG environment: LC_ADDRESS=fr_FR.UTF-8
    11	DEBUG environment: LC_MONETARY=fr_FR.UTF-8
    12	DEBUG environment: XAUTHORITY=/home/ansible/.Xauthority
    13	DEBUG environment: LC_PAPER=A4
    14	DEBUG environment: LANG=fr_FR.utf8
    15	DEBUG environment: LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=00:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lha=01;31:*.lz4=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.tzo=01;31:*.t7z=01;31:*.zip=01;31:*.z=01;31:*.dz=01;31:*.gz=01;31:*.lrz=01;31:*.lz=01;31:*.lzo=01;31:*.xz=01;31:*.zst=01;31:*.tzst=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.alz=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.cab=01;31:*.wim=01;31:*.swm=01;31:*.dwm=01;31:*.esd=01;31:*.jpg=01;35:*.jpeg=01;35:*.mjpg=01;35:*.mjpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.m4a=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.oga=00;36:*.opus=00;36:*.spx=00;36:*.xspf=00;36:
    16	DEBUG environment: TERM=xterm
    17	DEBUG environment: LC_RESPONSE=fr_FR.UTF-8
    18	DEBUG environment: DISPLAY=:0.0
    19	DEBUG environment: LC_TELEPHONE=fr_FR.UTF-8
    20	DEBUG environment: LC_MESSAGES=fr_FR.UTF-8
    21	DEBUG environment: LC_MEASUREMENT=fr_FR.UTF-8
    22	DEBUG environment: LC_CTYPE=C.UTF-8
    23	DEBUG environment: LC_TIME=fr_FR.UTF-8
    24	DEBUG environment: LC_COLLATE=fr_FR.UTF-8
    25	DEBUG environment: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
    26	DEBUG environment: LC_NUMERIC=fr_FR.UTF-8
    27	DEBUG environment: MAIL=/var/mail/root
    28	DEBUG environment: LOGNAME=root
    29	DEBUG environment: USER=root
    30	DEBUG environment: HOME=/root
    31	DEBUG environment: SHELL=/bin/bash
    32	DEBUG environment: SUDO_COMMAND=/usr/bin/vmdb2 cubietruck_buster_armhf_vmdb2-0.14.1.yaml --output cubietruck_buster_armhf.img --rootfs-tarball buster_armhf_rootfs.tgz --log=stderr
    33	DEBUG environment: SUDO_USER=ansible
    34	DEBUG environment: SUDO_UID=998
    35	DEBUG environment: SUDO_GID=998
    36	DEBUG Config:
    37	[config]
    38	output = cubietruck_buster_armhf.img
    39	log = stderr
    40	log-level = debug
    41	log-max = 0
    42	log-keep = 10
    43	log-mode = 0600
    44	dump-memory-profile = simple
    45	memory-dump-interval = 300
    46	image = 
    47	verbose = False
    48	rootfs-tarball = buster_armhf_rootfs.tgz
    49	size = 1073741824
    50	
    51	
    52	DEBUG Python version: 3.7.3 (default, Dec 20 2019, 18:57:59) 
    53	[GCC 8.3.0]
    54	INFO Load spec file cubietruck_buster_armhf_vmdb2-0.14.1.yaml
    55	INFO Running step: {'mkimg': 'cubietruck_buster_armhf.img', 'size': '3G'}
    56	INFO Calling <bound method MkimgStepRunner.run of <mkimg_plugin.MkimgStepRunner object at 0x7f86e4000400>>
    57	INFO Exec: ['qemu-img', 'create', '-f', 'raw', 'cubietruck_buster_armhf.img', '3G']
    58	DEBUG run external command: [['qemu-img', 'create', '-f', 'raw', 'cubietruck_buster_armhf.img', '3G']]
    59	DEBUG STDOUT: b"Formatting 'cubietruck_buster_armhf.img', fmt=raw size=3221225472\n"
    60	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <mkimg_plugin.MkimgStepRunner object at 0x7f86e4000400>>
    61	INFO Running step: {'mklabel': 'msdos', 'device': 'cubietruck_buster_armhf.img'}
    62	INFO Calling <bound method MklabelStepRunner.run of <mklabel_plugin.MklabelStepRunner object at 0x7f86e4000518>>
    63	INFO Exec: ['parted', '-s', 'cubietruck_buster_armhf.img', 'mklabel', 'msdos']
    64	DEBUG run external command: [['parted', '-s', 'cubietruck_buster_armhf.img', 'mklabel', 'msdos']]
    65	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <mklabel_plugin.MklabelStepRunner object at 0x7f86e4000518>>
    66	INFO Running step: {'mkpart': 'primary', 'device': 'cubietruck_buster_armhf.img', 'start': '0%', 'end': '100%', 'tag': 'root'}
    67	INFO Calling <bound method MkpartStepRunner.run of <mkpart_plugin.MkpartStepRunner object at 0x7f86e4000470>>
    68	INFO Exec: ['parted', '-m', 'cubietruck_buster_armhf.img', 'print']
    69	DEBUG run external command: [['parted', '-m', 'cubietruck_buster_armhf.img', 'print']]
    70	DEBUG STDOUT: b'BYT;\n/home/ansible/git/vmdb2-wrapper.git/cubietruck_buster_armhf.img:3221MB:file:512:512:msdos::;\n'
    71	INFO Exec: ['parted', '-s', 'cubietruck_buster_armhf.img', 'mkpart', 'primary', 'ext2', '0%', '100%']
    72	DEBUG run external command: [['parted', '-s', 'cubietruck_buster_armhf.img', 'mkpart', 'primary', 'ext2', '0%', '100%']]
    73	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <mkpart_plugin.MkpartStepRunner object at 0x7f86e4000470>>
    74	INFO Running step: {'kpartx': 'cubietruck_buster_armhf.img'}
    75	INFO Calling <bound method KpartxStepRunner.run of <kpartx_plugin.KpartxStepRunner object at 0x7f86e4000320>>
    76	INFO Exec: ['kpartx', '-asv', 'cubietruck_buster_armhf.img']
    77	DEBUG run external command: [['kpartx', '-asv', 'cubietruck_buster_armhf.img']]
    78	DEBUG STDOUT: b'add map loop0p1 (254:133): 0 6289408 linear 7:0 2048\n'
    79	INFO remembering /dev/mapper/loop0p1 as root
    80	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <kpartx_plugin.KpartxStepRunner object at 0x7f86e4000320>>
    81	INFO Running step: {'mkfs': 'ext4', 'partition': 'root'}
    82	INFO Calling <bound method MkfsStepRunner.run of <mkfs_plugin.MkfsStepRunner object at 0x7f86e40003c8>>
    83	INFO Exec: ['/sbin/mkfs', '-t', 'ext4', '/dev/mapper/loop0p1']
    84	DEBUG run external command: [['/sbin/mkfs', '-t', 'ext4', '/dev/mapper/loop0p1']]
    85	DEBUG STDERR: b'mke2fs 1.44.5 (15-Dec-2018)\n'
    86	DEBUG STDOUT: b'Discarding device blocks:   4096/786176\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08'
    87	DEBUG STDOUT: b'             \x08\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08\x08done                            \n'
    88	DEBUG STDOUT: b'Creating filesystem with 786176 4k blocks and 196608 inodes\nFilesystem UUID: 2a604a8e-7817-4266-bf29-45dbd196e3de\nSuperblock backups stored on blocks: \n\t32768, 98304, 163840, 229376, 294912\n\nAllocating group tables:  0/24\x08\x08\x08\x08\x08     \x08\x08\x08\x08\x08done                            \n'
    89	DEBUG STDOUT: b'Writing inode tables:  0/24\x08\x08\x08\x08\x08     \x08\x08\x08\x08\x08done                            \n'
    90	DEBUG STDOUT: b'Creating journal (16384 blocks): '
    91	DEBUG STDOUT: b'done\nWriting superblocks and filesystem accounting information:  0/24\x08\x08\x08\x08\x08'
    92	DEBUG STDOUT: b'     \x08\x08\x08\x08\x08'
    93	DEBUG STDOUT: b'done\n\n'
    94	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <mkfs_plugin.MkfsStepRunner object at 0x7f86e40003c8>>
    95	INFO Running step: {'mount': 'root'}
    96	INFO Calling <bound method MountStepRunner.run of <mount_plugin.MountStepRunner object at 0x7f86e40005c0>>
    97	INFO Exec: ['mount', '/dev/mapper/loop0p1', '/tmp/tmpmlmegzhh']
    98	DEBUG run external command: [['mount', '/dev/mapper/loop0p1', '/tmp/tmpmlmegzhh']]
    99	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <mount_plugin.MountStepRunner object at 0x7f86e40005c0>>
   100	INFO Running step: {'unpack-rootfs': 'root'}
   101	INFO Calling <bound method UnpackCacheStepRunner.run of <unpack_rootfs_plugin.UnpackCacheStepRunner object at 0x7f86e40005f8>>
   102	INFO Exec: ['tar', '-C', '/tmp/tmpmlmegzhh', '-xf', 'buster_armhf_rootfs.tgz', '--numeric-owner']
   103	DEBUG run external command: [['tar', '-C', '/tmp/tmpmlmegzhh', '-xf', 'buster_armhf_rootfs.tgz', '--numeric-owner']]
   104	INFO Exec: ['cp', '/etc/resolv.conf', '/tmp/tmpmlmegzhh/etc/resolv.conf']
   105	DEBUG run external command: [['cp', '/etc/resolv.conf', '/tmp/tmpmlmegzhh/etc/resolv.conf']]
   106	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <unpack_rootfs_plugin.UnpackCacheStepRunner object at 0x7f86e40005f8>>
   107	INFO Running step: {'qemu-debootstrap': 'buster', 'mirror': 'http://ftp.de.debian.org/debian', 'target': 'root', 'arch': 'armhf', 'components': ['main', 'contrib', 'non-free'], 'unless': 'rootfs_unpacked'}
   108	INFO Skipping as requested by unless
   109	INFO Calling <bound method QemuDebootstrapStepRunner.run_even_if_skipped of <qemudebootstrap_plugin.QemuDebootstrapStepRunner object at 0x7f86e4000588>>
   110	INFO mounting proc: ['chroot', '/tmp/tmpmlmegzhh', 'mount', '-t', 'proc', 'proc', '/proc']
   111	INFO Exec: ['chroot', '/tmp/tmpmlmegzhh', 'apt-get', 'update']
   112	DEBUG run external command: [['chroot', '/tmp/tmpmlmegzhh', 'apt-get', 'update']]
   113	DEBUG STDOUT: b'Get:1 http://security.debian.org buster/updates InRelease [65.4 kB]\n'
   114	DEBUG STDOUT: b'Get:2 http://ftp.de.debian.org/debian buster InRelease [121 kB]\n'
   115	DEBUG STDOUT: b'Get:3 http://ftp.de.debian.org/debian buster-updates InRelease [51.9 kB]\n'
   116	DEBUG STDOUT: b'Get:4 http://ftp.de.debian.org/debian buster-backports InRelease [46.7 kB]\n'
   117	DEBUG STDOUT: b'Get:5 http://security.debian.org buster/updates/main armhf Packages [201 kB]\n'
   118	DEBUG STDOUT: b'Get:6 http://security.debian.org buster/updates/main Translation-en [110 kB]\n'
   119	DEBUG STDOUT: b'Get:7 http://ftp.de.debian.org/debian buster/main armhf Packages [7697 kB]\n'
   120	DEBUG STDOUT: b'Get:8 http://ftp.de.debian.org/debian buster/main Translation-en [5969 kB]\n'
   121	DEBUG STDOUT: b'Get:9 http://ftp.de.debian.org/debian buster/contrib armhf Packages [40.9 kB]\n'
   122	DEBUG STDOUT: b'Get:10 http://ftp.de.debian.org/debian buster/non-free armhf Packages [61.9 kB]\n'
   123	DEBUG STDOUT: b'Get:11 http://ftp.de.debian.org/debian buster/non-free Translation-en [88.9 kB]\n'
   124	DEBUG STDOUT: b'Get:12 http://ftp.de.debian.org/debian buster-updates/main armhf Packages.diff/Index [3196 B]\n'
   125	DEBUG STDOUT: b'Get:13 http://ftp.de.debian.org/debian buster-updates/main Translation-en.diff/Index [2704 B]\n'
   126	DEBUG STDOUT: b'Get:14 http://ftp.de.debian.org/debian buster-updates/main armhf Packages 2020-06-04-2016.16.pdiff [1107 B]\n'
   127	DEBUG STDOUT: b'Get:15 http://ftp.de.debian.org/debian buster-updates/main armhf Packages 2020-06-07-1403.53.pdiff [439 B]\n'
   128	DEBUG STDOUT: b'Get:15 http://ftp.de.debian.org/debian buster-updates/main armhf Packages 2020-06-07-1403.53.pdiff [439 B]\n'
   129	DEBUG STDOUT: b'Get:16 http://ftp.de.debian.org/debian buster-updates/main Translation-en 2020-06-07-1403.53.pdiff [368 B]\n'
   130	DEBUG STDOUT: b'Get:16 http://ftp.de.debian.org/debian buster-updates/main Translation-en 2020-06-07-1403.53.pdiff [368 B]\n'
   131	DEBUG STDOUT: b'Get:17 http://ftp.de.debian.org/debian buster-updates/non-free armhf Packages [604 B]\n'
   132	DEBUG STDOUT: b'Get:18 http://ftp.de.debian.org/debian buster-updates/non-free Translation-en [673 B]\n'
   133	DEBUG STDOUT: b'Get:19 http://ftp.de.debian.org/debian buster-backports/main armhf Packages.diff/Index [27.8 kB]\n'
   134	DEBUG STDOUT: b'Ign:19 http://ftp.de.debian.org/debian buster-backports/main armhf Packages.diff/Index\n'
   135	DEBUG STDOUT: b'Get:20 http://ftp.de.debian.org/debian buster-backports/main Translation-en.diff/Index [27.8 kB]\n'
   136	DEBUG STDOUT: b'Get:21 http://ftp.de.debian.org/debian buster-backports/contrib armhf Packages.diff/Index [12.5 kB]\n'
   137	DEBUG STDOUT: b'Get:22 http://ftp.de.debian.org/debian buster-backports/contrib Translation-en.diff/Index [9100 B]\n'
   138	DEBUG STDOUT: b'Get:23 http://ftp.de.debian.org/debian buster-backports/non-free armhf Packages.diff/Index [8608 B]\n'
   139	DEBUG STDOUT: b'Get:24 http://ftp.de.debian.org/debian buster-backports/main Translation-en 2020-05-09-0210.18.pdiff [244 B]\n'
   140	DEBUG STDOUT: b'Get:25 http://ftp.de.debian.org/debian buster-backports/main Translation-en 2020-05-12-1406.11.pdiff [2340 B]\n'
   141	DEBUG STDOUT: b'Get:26 http://ftp.de.debian.org/debian buster-backports/main Translation-en 2020-05-19-0807.39.pdiff [1642 B]\n'
   142	DEBUG STDOUT: b'Get:27 http://ftp.de.debian.org/debian buster-backports/main Translation-en 2020-05-25-2012.07.pdiff [953 B]\n'
   143	DEBUG STDOUT: b'Get:28 http://ftp.de.debian.org/debian buster-backports/main Translation-en 2020-05-27-1404.35.pdiff [3152 B]\n'
   144	DEBUG STDOUT: b'Get:29 http://ftp.de.debian.org/debian buster-backports/main Translation-en 2020-05-29-0201.59.pdiff [349 B]\n'
   145	DEBUG STDOUT: b'Get:30 http://ftp.de.debian.org/debian buster-backports/main Translation-en 2020-06-01-2006.55.pdiff [889 B]\n'
   146	DEBUG STDOUT: b'Get:31 http://ftp.de.debian.org/debian buster-backports/main Translation-en 2020-06-04-1406.28.pdiff [6927 B]\n'
   147	DEBUG STDOUT: b'Get:32 http://ftp.de.debian.org/debian buster-backports/main Translation-en 2020-06-10-1413.11.pdiff [1902 B]\n'
   148	DEBUG STDOUT: b'Get:33 http://ftp.de.debian.org/debian buster-backports/contrib armhf Packages 2020-05-19-0807.39.pdiff [414 B]\n'
   149	DEBUG STDOUT: b'Get:32 http://ftp.de.debian.org/debian buster-backports/main Translation-en 2020-06-10-1413.11.pdiff [1902 B]\n'
   150	DEBUG STDOUT: b'Get:34 http://ftp.de.debian.org/debian buster-backports/contrib armhf Packages 2020-05-25-2012.07.pdiff [1839 B]\n'
   151	DEBUG STDOUT: b'Get:35 http://ftp.de.debian.org/debian buster-backports/contrib armhf Packages 2020-06-11-0203.42.pdiff [183 B]\n'
   152	DEBUG STDOUT: b'Get:35 http://ftp.de.debian.org/debian buster-backports/contrib armhf Packages 2020-06-11-0203.42.pdiff [183 B]\n'
   153	DEBUG STDOUT: b'Get:36 http://ftp.de.debian.org/debian buster-backports/contrib Translation-en 2020-05-19-0807.39.pdiff [604 B]\n'
   154	DEBUG STDOUT: b'Get:37 http://ftp.de.debian.org/debian buster-backports/contrib Translation-en 2020-05-25-2012.07.pdiff [442 B]\n'
   155	DEBUG STDOUT: b'Get:38 http://ftp.de.debian.org/debian buster-backports/non-free armhf Packages 2020-05-15-1402.01.pdiff [885 B]\n'
   156	DEBUG STDOUT: b'Get:37 http://ftp.de.debian.org/debian buster-backports/contrib Translation-en 2020-05-25-2012.07.pdiff [442 B]\n'
   157	DEBUG STDOUT: b'Get:38 http://ftp.de.debian.org/debian buster-backports/non-free armhf Packages 2020-05-15-1402.01.pdiff [885 B]\n'
   158	DEBUG STDOUT: b'Get:39 http://ftp.de.debian.org/debian buster-backports/main armhf Packages [306 kB]\n'
   159	DEBUG STDOUT: b'Fetched 14.9 MB in 14s (1093 kB/s)\nReading package lists...'
   160	DEBUG STDOUT: b'\n'
   161	INFO unmounting proc: ['chroot', '/tmp/tmpmlmegzhh', 'umount', '/proc']
   162	INFO Running step: {'apt': 'install', 'packages': ['initramfs-tools'], 'tag': 'root', 'unless': 'rootfs_unpacked'}
   163	INFO Skipping as requested by unless
   164	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <apt_plugin.AptStepRunner object at 0x7f86e4050128>>
   165	INFO Running step: {'chroot': 'root', 'shell': 'echo "deb http://ftp.de.debian.org/debian buster main contrib non-free" > /etc/apt/sources.list\necho "deb http://security.debian.org/ buster/updates main contrib non-free" >> /etc/apt/sources.list\necho "deb http://ftp.de.debian.org/debian buster-updates main contrib non-free" >> /etc/apt/sources.list\necho "deb http://ftp.de.debian.org/debian buster-backports main contrib non-free" >> /etc/apt/sources.list\napt-get update\nmv /etc/kernel/postinst.d/initramfs-tools /\napt-get install -y -t buster-backports linux-image-armmp-lpae\nmv /initramfs-tools /etc/kernel/postinst.d/', 'unless': 'rootfs_unpacked'}
   166	INFO Skipping as requested by unless
   167	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <chroot_plugin.ChrootStepRunner object at 0x7f86e4078c50>>
   168	INFO Running step: {'apt': 'install', 'packages': ['flash-kernel'], 'tag': 'root', 'unless': 'rootfs_unpacked'}
   169	INFO Skipping as requested by unless
   170	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <apt_plugin.AptStepRunner object at 0x7f86e4050128>>
   171	INFO Running step: {'cache-rootfs': 'root', 'unless': 'rootfs_unpacked'}
   172	INFO Skipping as requested by unless
   173	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <cache_rootfs_plugin.MakeCacheStepRunner object at 0x7f86e4050080>>
   174	INFO Running step: {'create-file': '/etc/hostname', 'contents': 'Cubietruck\n'}
   175	INFO Calling <bound method CreateFileStepRunner.run of <create_file_plugin.CreateFileStepRunner object at 0x7f86e40001d0>>
   176	INFO Creating file /tmp/tmpmlmegzhh//etc/hostname, uid 0, gid 0, perms 644
   177	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <create_file_plugin.CreateFileStepRunner object at 0x7f86e40001d0>>
   178	INFO Running step: {'fstab': 'root'}
   179	INFO Calling <bound method FstabStepRunner.run of <fstab_plugin.FstabStepRunner object at 0x7f86e40002b0>>
   180	INFO Exec: ['blkid', '-c', '/dev/null', '-o', 'value', '-s', 'UUID', '/dev/mapper/loop0p1']
   181	DEBUG run external command: [['blkid', '-c', '/dev/null', '-o', 'value', '-s', 'UUID', '/dev/mapper/loop0p1']]
   182	DEBUG STDOUT: b'2a604a8e-7817-4266-bf29-45dbd196e3de\n'
   183	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <fstab_plugin.FstabStepRunner object at 0x7f86e40002b0>>
   184	INFO Running step: {'chroot': 'root', 'shell': 'apt-get install -y -t buster-backports firmware-brcm80211'}
   185	INFO Calling <bound method ChrootStepRunner.run of <chroot_plugin.ChrootStepRunner object at 0x7f86e4078c50>>
   186	INFO mounting proc: ['chroot', '/tmp/tmpmlmegzhh', 'mount', '-t', 'proc', 'proc', '/proc']
   187	INFO Exec: ['chroot', '/tmp/tmpmlmegzhh', 'sh', '-ec', 'apt-get install -y -t buster-backports firmware-brcm80211']
   188	DEBUG run external command: [['chroot', '/tmp/tmpmlmegzhh', 'sh', '-ec', 'apt-get install -y -t buster-backports firmware-brcm80211']]
   189	DEBUG STDOUT: b'Reading package lists...'
   190	DEBUG STDOUT: b'\n'
   191	DEBUG STDOUT: b'Building dependency tree...'
   192	DEBUG STDOUT: b'\nReading state information...'
   193	DEBUG STDOUT: b'\n'
   194	DEBUG STDOUT: b'The following NEW packages will be installed:\n'
   195	DEBUG STDOUT: b'  firmware-brcm80211\n'
   196	DEBUG STDOUT: b'0 upgraded, 1 newly installed, 0 to remove and 29 not upgraded.\nNeed to get 4279 kB of archives.\nAfter this operation, 15.6 MB of additional disk space will be used.\nGet:1 http://ftp.de.debian.org/debian buster-backports/non-free armhf firmware-brcm80211 all 20190717-2~bpo10+1 [4279 kB]\n'
   197	DEBUG STDOUT: b'Fetched 4279 kB in 1s (3257 kB/s)\n'
   198	DEBUG STDERR: b'E: '
   199	DEBUG STDERR: b'Can not write log (Is /dev/pts mounted?) - posix_openpt (19: No such device)'
   200	DEBUG STDERR: b'\n'
   201	DEBUG STDOUT: b'Selecting previously unselected package firmware-brcm80211.\n'
   202	DEBUG STDOUT: b'(Reading database ... 15088 files and directories currently installed.)\n'
   203	DEBUG STDOUT: b'Preparing to unpack .../firmware-brcm80211_20190717-2~bpo10+1_all.deb ...\n'
   204	DEBUG STDOUT: b'Unpacking firmware-brcm80211 (20190717-2~bpo10+1) ...\n'
   205	DEBUG STDOUT: b'Setting up firmware-brcm80211 (20190717-2~bpo10+1) ...\n'
   206	INFO unmounting proc: ['chroot', '/tmp/tmpmlmegzhh', 'umount', '/proc']
   207	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <chroot_plugin.ChrootStepRunner object at 0x7f86e4078c50>>
   208	INFO Running step: {'create-file': '/lib/firmware/brcm/brcmfmac43362-sdio.txt', 'contents': '#AP6210_NVRAM_V1.2_03192013\nmanfid=0x2d0\nprodid=0x492\nvendid=0x14e4\ndevid=0x4343\nboardtype=0x0598\n\n# Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same\n#Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305\nboardrev=0x1307\nboardnum=777\nxtalfreq=26000\nboardflags=0x80201\nboardflags2=0x80\nsromrev=3\nwl0id=0x431b\nmacaddr=00:90:4c:07:71:12\naa2g=1\nag0=2\nmaxp2ga0=74\ncck2gpo=0x2222\nofdm2gpo=0x44444444\nmcs2gpo0=0x6666\nmcs2gpo1=0x6666\npa0maxpwr=56\n\n#P207 PA params\n#pa0b0=5447\n#pa0b1=-658\n#pa0b2=-175<div></div>\n\n#Same PA params for P304,P305, P306, P307\n\npa0b0=5447\npa0b1=-607\npa0b2=-160\npa0itssit=62\npa1itssit=62\n\n\ncckPwrOffset=5\nccode=0\nrssismf2g=0xa\nrssismc2g=0x3\nrssisav2g=0x7\ntriso2g=0\nnoise_cal_enable_2g=0\nnoise_cal_po_2g=0\nswctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff\ntemp_add=29767\ntemp_mult=425\n\nbtc_flags=0x6\nbtc_params0=5000\nbtc_params1=1000\nbtc_params6=63\n'}
   209	INFO Calling <bound method CreateFileStepRunner.run of <create_file_plugin.CreateFileStepRunner object at 0x7f86e40001d0>>
   210	INFO Creating file /tmp/tmpmlmegzhh//lib/firmware/brcm/brcmfmac43362-sdio.txt, uid 0, gid 0, perms 644
   211	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <create_file_plugin.CreateFileStepRunner object at 0x7f86e40001d0>>
   212	INFO Running step: {'create-file': '/etc/flash-kernel/machine', 'contents': 'Cubietech Cubietruck\n'}
   213	INFO Calling <bound method CreateFileStepRunner.run of <create_file_plugin.CreateFileStepRunner object at 0x7f86e40001d0>>
   214	INFO Creating file /tmp/tmpmlmegzhh//etc/flash-kernel/machine, uid 0, gid 0, perms 644
   215	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <create_file_plugin.CreateFileStepRunner object at 0x7f86e40001d0>>
   216	INFO Running step: {'root-fs': 'root', 'shell': 'mount -o bind /dev $ROOT/dev'}
   217	INFO Calling <bound method ShellStepRunner.run of <shell_plugin.ShellStepRunner object at 0x7f86e40004e0>>
   218	INFO Exec: ['sh', '-ec', 'mount -o bind /dev $ROOT/dev']
   219	DEBUG run external command: [['sh', '-ec', 'mount -o bind /dev $ROOT/dev']]
   220	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <shell_plugin.ShellStepRunner object at 0x7f86e40004e0>>
   221	INFO Running step: {'chroot': 'root', 'shell': 'apt-get install -y -t buster-backports wireless-regdb\napt-get install -y crda\n\nsed -i s_errors=remount-ro_noatime,nodiratime,errors=remount-ro_g /etc/fstab\n\nsed -i "s_quiet_root=$(grep ^UUID /etc/fstab | cut -d \\  -f 1) net.ifnames=0_g" /etc/default/flash-kernel\nupdate-initramfs -c -k $(ls -l /vmlinuz | sed "s%^.*vmlinuz-\\(.*\\)$%\\1%g")\numount /dev\n\nsed -i "s_root:\\*:_root::_g" /etc/shadow'}
   222	INFO Calling <bound method ChrootStepRunner.run of <chroot_plugin.ChrootStepRunner object at 0x7f86e4078c50>>
   223	INFO mounting proc: ['chroot', '/tmp/tmpmlmegzhh', 'mount', '-t', 'proc', 'proc', '/proc']
   224	INFO Exec: ['chroot', '/tmp/tmpmlmegzhh', 'sh', '-ec', 'apt-get install -y -t buster-backports wireless-regdb\napt-get install -y crda\n\nsed -i s_errors=remount-ro_noatime,nodiratime,errors=remount-ro_g /etc/fstab\n\nsed -i "s_quiet_root=$(grep ^UUID /etc/fstab | cut -d \\  -f 1) net.ifnames=0_g" /etc/default/flash-kernel\nupdate-initramfs -c -k $(ls -l /vmlinuz | sed "s%^.*vmlinuz-\\(.*\\)$%\\1%g")\numount /dev\n\nsed -i "s_root:\\*:_root::_g" /etc/shadow']
   225	DEBUG run external command: [['chroot', '/tmp/tmpmlmegzhh', 'sh', '-ec', 'apt-get install -y -t buster-backports wireless-regdb\napt-get install -y crda\n\nsed -i s_errors=remount-ro_noatime,nodiratime,errors=remount-ro_g /etc/fstab\n\nsed -i "s_quiet_root=$(grep ^UUID /etc/fstab | cut -d \\  -f 1) net.ifnames=0_g" /etc/default/flash-kernel\nupdate-initramfs -c -k $(ls -l /vmlinuz | sed "s%^.*vmlinuz-\\(.*\\)$%\\1%g")\numount /dev\n\nsed -i "s_root:\\*:_root::_g" /etc/shadow']]
   226	DEBUG STDOUT: b'Reading package lists...'
   227	DEBUG STDOUT: b'\n'
   228	DEBUG STDOUT: b'Building dependency tree...'
   229	DEBUG STDOUT: b'\nReading state information...'
   230	DEBUG STDOUT: b'\n'
   231	DEBUG STDOUT: b'Suggested packages:\n'
   232	DEBUG STDOUT: b'  crda\n'
   233	DEBUG STDOUT: b'The following NEW packages will be installed:\n'
   234	DEBUG STDOUT: b'  wireless-regdb\n'
   235	DEBUG STDOUT: b'0 upgraded, 1 newly installed, 0 to remove and 29 not upgraded.\nNeed to get 13.5 kB of archives.\nAfter this operation, 44.0 kB of additional disk space will be used.\nGet:1 http://ftp.de.debian.org/debian buster-backports/main armhf wireless-regdb all 2019.06.03-1~bpo10+1 [13.5 kB]\n'
   236	DEBUG STDOUT: b'Fetched 13.5 kB in 0s (46.6 kB/s)\n'
   237	DEBUG STDERR: b'E: Can not write log (Is /dev/pts mounted?) - posix_openpt (19: No such device)'
   238	DEBUG STDERR: b'\n'
   239	DEBUG STDOUT: b'Selecting previously unselected package wireless-regdb.\n'
   240	DEBUG STDOUT: b'(Reading database ... 15129 files and directories currently installed.)\n'
   241	DEBUG STDOUT: b'Preparing to unpack .../wireless-regdb_2019.06.03-1~bpo10+1_all.deb ...\n'
   242	DEBUG STDOUT: b'Unpacking wireless-regdb (2019.06.03-1~bpo10+1) ...\n'
   243	DEBUG STDOUT: b'Setting up wireless-regdb (2019.06.03-1~bpo10+1) ...\n'
   244	DEBUG STDOUT: b'update-alternatives: '
   245	DEBUG STDOUT: b'using /lib/firmware/regulatory.db-debian to provide /lib/firmware/regulatory.db (regulatory.db) in auto mode'
   246	DEBUG STDOUT: b'\n'
   247	DEBUG STDOUT: b'Reading package lists...'
   248	DEBUG STDOUT: b'\n'
   249	DEBUG STDOUT: b'Building dependency tree...'
   250	DEBUG STDOUT: b'\nReading state information...'
   251	DEBUG STDOUT: b'\n'
   252	DEBUG STDOUT: b'The following additional packages will be installed:\n'
   253	DEBUG STDOUT: b'  iw libnl-3-200 libnl-genl-3-200\n'
   254	DEBUG STDOUT: b'The following NEW packages will be installed:\n'
   255	DEBUG STDOUT: b'  crda iw libnl-3-200 libnl-genl-3-200\n'
   256	DEBUG STDOUT: b'0 upgraded, 4 newly installed, 0 to remove and 16 not upgraded.\nNeed to get 215 kB of archives.\nAfter this operation, 624 kB of additional disk space will be used.\nGet:1 http://ftp.de.debian.org/debian buster/main armhf libnl-3-200 armhf 3.4.0-1 [55.6 kB]\n'
   257	DEBUG STDOUT: b'Get:2 http://ftp.de.debian.org/debian buster/main armhf libnl-genl-3-200 armhf 3.4.0-1 [19.3 kB]\n'
   258	DEBUG STDOUT: b'Get:3 http://ftp.de.debian.org/debian buster/main armhf iw armhf 5.0.1-1 [77.8 kB]\n'
   259	DEBUG STDOUT: b'Get:4 http://ftp.de.debian.org/debian buster/main armhf crda armhf 3.18-1 [62.1 kB]\n'
   260	DEBUG STDOUT: b'Fetched 215 kB in 1s (410 kB/s)\n'
   261	DEBUG STDERR: b'E: Can not write log (Is /dev/pts mounted?) - posix_openpt (19: No such device)'
   262	DEBUG STDERR: b'\n'
   263	DEBUG STDOUT: b'Selecting previously unselected package libnl-3-200:armhf.\n'
   264	DEBUG STDOUT: b'(Reading database ... 15141 files and directories currently installed.)\n'
   265	DEBUG STDOUT: b'Preparing to unpack .../libnl-3-200_3.4.0-1_armhf.deb ...\n'
   266	DEBUG STDOUT: b'Unpacking libnl-3-200:armhf (3.4.0-1) ...\n'
   267	DEBUG STDOUT: b'Selecting previously unselected package libnl-genl-3-200:armhf.\n'
   268	DEBUG STDOUT: b'Preparing to unpack .../libnl-genl-3-200_3.4.0-1_armhf.deb ...\n'
   269	DEBUG STDOUT: b'Unpacking libnl-genl-3-200:armhf (3.4.0-1) ...\n'
   270	DEBUG STDOUT: b'Selecting previously unselected package iw.\n'
   271	DEBUG STDOUT: b'Preparing to unpack .../archives/iw_5.0.1-1_armhf.deb ...\n'
   272	DEBUG STDOUT: b'Unpacking iw (5.0.1-1) ...\n'
   273	DEBUG STDOUT: b'Selecting previously unselected package crda.\n'
   274	DEBUG STDOUT: b'Preparing to unpack .../archives/crda_3.18-1_armhf.deb ...\n'
   275	DEBUG STDOUT: b'Unpacking crda (3.18-1) ...\n'
   276	DEBUG STDOUT: b'Setting up libnl-3-200:armhf (3.4.0-1) ...\n'
   277	DEBUG STDOUT: b'Setting up libnl-genl-3-200:armhf (3.4.0-1) ...\n'
   278	DEBUG STDOUT: b'Setting up iw (5.0.1-1) ...\n'
   279	DEBUG STDOUT: b'Setting up crda (3.18-1) ...\n'
   280	DEBUG STDOUT: b'Processing triggers for libc-bin (2.28-10) ...\n'
   281	DEBUG STDOUT: b'update-initramfs: Generating /boot/initrd.img-5.5.0-0.bpo.2-armmp-lpae\n'
   282	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8125a-3.fw for module r8169\n'
   283	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-2.fw for module r8169\n'
   284	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-1.fw for module r8169\n'
   285	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168fp-3.fw for module r8169\n'
   286	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168h-2.fw for module r8169\n'
   287	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168h-1.fw for module r8169\n'
   288	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-3.fw for module r8169\n'
   289	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-2.fw for module r8169\n'
   290	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-2.fw for module r8169\n'
   291	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-1.fw for module r8169\n'
   292	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-2.fw for module r8169\n'
   293	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-1.fw for module r8169\n'
   294	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8402-1.fw for module r8169\n'
   295	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-2.fw for module r8169\n'
   296	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-1.fw for module r8169\n'
   297	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169\n'
   298	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-3.fw for module r8169\n'
   299	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-2.fw for module r8169\n'
   300	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-1.fw for module r8169\n'
   301	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-2.fw for module r8169\n'
   302	DEBUG STDERR: b'W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-1.fw for module r8169\n'
   303	DEBUG STDERR: b'Using DTB: sun7i-a20-cubietruck.dtb\n'
   304	DEBUG STDERR: b'Installing /usr/lib/linux-image-5.5.0-0.bpo.2-armmp-lpae/sun7i-a20-cubietruck.dtb into /boot/dtbs/5.5.0-0.bpo.2-armmp-lpae/./sun7i-a20-cubietruck.dtb\n'
   305	DEBUG STDERR: b'Installing new sun7i-a20-cubietruck.dtb.\n'
   306	DEBUG STDERR: b'Installing /usr/lib/linux-image-5.5.0-0.bpo.2-armmp-lpae/sun7i-a20-cubietruck.dtb into /boot/dtbs/5.5.0-0.bpo.2-armmp-lpae/./sun7i-a20-cubietruck.dtb\n'
   307	DEBUG STDERR: b'Taking backup of sun7i-a20-cubietruck.dtb.\n'
   308	DEBUG STDERR: b'Installing new sun7i-a20-cubietruck.dtb.\n'
   309	DEBUG STDERR: b'flash-kernel: installing version 5.5.0-0.bpo.2-armmp-lpae\n'
   310	DEBUG STDERR: b'Generating boot script u-boot image... '
   311	DEBUG STDERR: b'done.\n'
   312	DEBUG STDERR: b'Installing new boot.scr.\n'
   313	INFO unmounting proc: ['chroot', '/tmp/tmpmlmegzhh', 'umount', '/proc']
   314	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <chroot_plugin.ChrootStepRunner object at 0x7f86e4078c50>>
   315	INFO Running step: {'apt': 'install', 'packages': ['u-boot-sunxi'], 'tag': 'root'}
   316	INFO Calling <bound method AptStepRunner.run of <apt_plugin.AptStepRunner object at 0x7f86e4050128>>
   317	INFO mounting proc: ['chroot', '/tmp/tmpmlmegzhh', 'mount', '-t', 'proc', 'proc', '/proc']
   318	INFO Exec: ['chroot', '/tmp/tmpmlmegzhh', 'apt-get', 'update']
   319	DEBUG run external command: [['chroot', '/tmp/tmpmlmegzhh', 'apt-get', 'update']]
   320	DEBUG STDOUT: b'Hit:1 http://security.debian.org buster/updates InRelease\n'
   321	DEBUG STDOUT: b'Hit:2 http://ftp.de.debian.org/debian buster InRelease\n'
   322	DEBUG STDOUT: b'Hit:3 http://ftp.de.debian.org/debian buster-updates InRelease\n'
   323	DEBUG STDOUT: b'Hit:4 http://ftp.de.debian.org/debian buster-backports InRelease\n'
   324	DEBUG STDOUT: b'Reading package lists...'
   325	DEBUG STDOUT: b'\n'
   326	INFO unmounting proc: ['chroot', '/tmp/tmpmlmegzhh', 'umount', '/proc']
   327	INFO mounting proc: ['chroot', '/tmp/tmpmlmegzhh', 'mount', '-t', 'proc', 'proc', '/proc']
   328	INFO Exec: ['chroot', '/tmp/tmpmlmegzhh', 'apt-get', '-y', '--no-show-progress', 'install', 'eatmydata']
   329	DEBUG run external command: [['chroot', '/tmp/tmpmlmegzhh', 'apt-get', '-y', '--no-show-progress', 'install', 'eatmydata']]
   330	DEBUG STDOUT: b'Reading package lists...'
   331	DEBUG STDOUT: b'\n'
   332	DEBUG STDOUT: b'Building dependency tree...'
   333	DEBUG STDOUT: b'\nReading state information...'
   334	DEBUG STDOUT: b'\n'
   335	DEBUG STDOUT: b'eatmydata is already the newest version (105-7).\n0 upgraded, 0 newly installed, 0 to remove and 16 not upgraded.\n'
   336	INFO unmounting proc: ['chroot', '/tmp/tmpmlmegzhh', 'umount', '/proc']
   337	INFO mounting proc: ['chroot', '/tmp/tmpmlmegzhh', 'mount', '-t', 'proc', 'proc', '/proc']
   338	INFO Exec: ['chroot', '/tmp/tmpmlmegzhh', 'eatmydata', 'apt-get', 'update']
   339	DEBUG run external command: [['chroot', '/tmp/tmpmlmegzhh', 'eatmydata', 'apt-get', 'update']]
   340	DEBUG STDOUT: b'Hit:1 http://security.debian.org buster/updates InRelease\n'
   341	DEBUG STDOUT: b'Hit:2 http://ftp.de.debian.org/debian buster InRelease\n'
   342	DEBUG STDOUT: b'Hit:3 http://ftp.de.debian.org/debian buster-updates InRelease\n'
   343	DEBUG STDOUT: b'Hit:4 http://ftp.de.debian.org/debian buster-backports InRelease\n'
   344	DEBUG STDOUT: b'Reading package lists...'
   345	DEBUG STDOUT: b'\n'
   346	INFO unmounting proc: ['chroot', '/tmp/tmpmlmegzhh', 'umount', '/proc']
   347	INFO mounting proc: ['chroot', '/tmp/tmpmlmegzhh', 'mount', '-t', 'proc', 'proc', '/proc']
   348	INFO Exec: ['chroot', '/tmp/tmpmlmegzhh', 'eatmydata', 'apt-get', '-y', '--no-show-progress', 'install', 'u-boot-sunxi']
   349	DEBUG run external command: [['chroot', '/tmp/tmpmlmegzhh', 'eatmydata', 'apt-get', '-y', '--no-show-progress', 'install', 'u-boot-sunxi']]
   350	DEBUG STDOUT: b'Reading package lists...'
   351	DEBUG STDOUT: b'\n'
   352	DEBUG STDOUT: b'Building dependency tree...'
   353	DEBUG STDOUT: b'\nReading state information...'
   354	DEBUG STDOUT: b'\n'
   355	DEBUG STDOUT: b'The following NEW packages will be installed:\n'
   356	DEBUG STDOUT: b'  u-boot-sunxi\n'
   357	DEBUG STDOUT: b'0 upgraded, 1 newly installed, 0 to remove and 16 not upgraded.\nNeed to get 1161 kB of archives.\nAfter this operation, 23.5 MB of additional disk space will be used.\nGet:1 http://ftp.de.debian.org/debian buster/main armhf u-boot-sunxi armhf 2019.01+dfsg-7 [1161 kB]\n'
   358	DEBUG STDOUT: b'Fetched 1161 kB in 1s (1589 kB/s)\n'
   359	DEBUG STDERR: b'E: Can not write log (Is /dev/pts mounted?) - posix_openpt (19: No such device)'
   360	DEBUG STDERR: b'\n'
   361	DEBUG STDOUT: b'Selecting previously unselected package u-boot-sunxi:armhf.\n'
   362	DEBUG STDOUT: b'(Reading database ... 15184 files and directories currently installed.)\n'
   363	DEBUG STDOUT: b'Preparing to unpack .../u-boot-sunxi_2019.01+dfsg-7_armhf.deb ...\n'
   364	DEBUG STDOUT: b'Unpacking u-boot-sunxi:armhf (2019.01+dfsg-7) ...\n'
   365	DEBUG STDOUT: b'Setting up u-boot-sunxi:armhf (2019.01+dfsg-7) ...\n'
   366	INFO unmounting proc: ['chroot', '/tmp/tmpmlmegzhh', 'umount', '/proc']
   367	INFO mounting proc: ['chroot', '/tmp/tmpmlmegzhh', 'mount', '-t', 'proc', 'proc', '/proc']
   368	INFO Exec: ['chroot', '/tmp/tmpmlmegzhh', 'apt-get', 'clean']
   369	DEBUG run external command: [['chroot', '/tmp/tmpmlmegzhh', 'apt-get', 'clean']]
La suite dans le poste suivant ...(pour des raisons de taille max ...)
Modifié en dernier par jeanmarc le sam. juin 13, 2020 8:21 pm, modifié 2 fois.
Cordialement

jeanmarc
Messages : 40
Enregistré le : dim. mars 22, 2020 5:28 pm
Localisation : Essonne

Re: [cubietruck] [debian] 5.5.0-0.bpo.2-armmp-lpae KO

Message par jeanmarc »

LOG fichier 2/2

Code : Tout sélectionner

   370	INFO unmounting proc: ['chroot', '/tmp/tmpmlmegzhh', 'umount', '/proc']
   371	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <apt_plugin.AptStepRunner object at 0x7f86e4050128>>
   372	INFO Running step: {'root-fs': 'root', 'shell': 'dd conv=fsync,notrunc if=$ROOT/usr/lib/u-boot/Cubietruck/u-boot-sunxi-with-spl.bin of=cubietruck_buster_armhf.img bs=1024 seek=8'}
   373	INFO Calling <bound method ShellStepRunner.run of <shell_plugin.ShellStepRunner object at 0x7f86e40004e0>>
   374	INFO Exec: ['sh', '-ec', 'dd conv=fsync,notrunc if=$ROOT/usr/lib/u-boot/Cubietruck/u-boot-sunxi-with-spl.bin of=cubietruck_buster_armhf.img bs=1024 seek=8']
   375	DEBUG run external command: [['sh', '-ec', 'dd conv=fsync,notrunc if=$ROOT/usr/lib/u-boot/Cubietruck/u-boot-sunxi-with-spl.bin of=cubietruck_buster_armhf.img bs=1024 seek=8']]
   376	DEBUG STDERR: b'501+1 records in\n501+1 records out\n513221 bytes (513 kB, 501 KiB) copied, 0.132204 s, 3.9 MB/s\n'
   377	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <shell_plugin.ShellStepRunner object at 0x7f86e40004e0>>
   378	INFO Running step: {'create-file': '/etc/network/interfaces.d/lo', 'contents': 'auto lo\niface lo inet loopback\n'}
   379	INFO Calling <bound method CreateFileStepRunner.run of <create_file_plugin.CreateFileStepRunner object at 0x7f86e40001d0>>
   380	INFO Creating file /tmp/tmpmlmegzhh//etc/network/interfaces.d/lo, uid 0, gid 0, perms 644
   381	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <create_file_plugin.CreateFileStepRunner object at 0x7f86e40001d0>>
   382	INFO Running step: {'create-file': '/etc/network/interfaces.d/eth0', 'contents': 'auto eth0\niface eth0 inet dhcp\n'}
   383	INFO Calling <bound method CreateFileStepRunner.run of <create_file_plugin.CreateFileStepRunner object at 0x7f86e40001d0>>
   384	INFO Creating file /tmp/tmpmlmegzhh//etc/network/interfaces.d/eth0, uid 0, gid 0, perms 644
   385	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <create_file_plugin.CreateFileStepRunner object at 0x7f86e40001d0>>
   386	INFO Running step: {'root-fs': 'root', 'shell': 'test -e vmdb2-ansible.yaml || ln -s vmdb2-ansible.yaml.example vmdb2-ansible.yaml\nmount -t proc proc $ROOT/proc\nmount -o bind /dev $ROOT/dev'}
   387	INFO Calling <bound method ShellStepRunner.run of <shell_plugin.ShellStepRunner object at 0x7f86e40004e0>>
   388	INFO Exec: ['sh', '-ec', 'test -e vmdb2-ansible.yaml || ln -s vmdb2-ansible.yaml.example vmdb2-ansible.yaml\nmount -t proc proc $ROOT/proc\nmount -o bind /dev $ROOT/dev']
   389	DEBUG run external command: [['sh', '-ec', 'test -e vmdb2-ansible.yaml || ln -s vmdb2-ansible.yaml.example vmdb2-ansible.yaml\nmount -t proc proc $ROOT/proc\nmount -o bind /dev $ROOT/dev']]
   390	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <shell_plugin.ShellStepRunner object at 0x7f86e40004e0>>
   391	INFO Running step: {'ansible': 'root', 'playbook': 'vmdb2-ansible.yaml'}
   392	INFO Calling <bound method AnsibleStepRunner.run of <ansible_plugin.AnsibleStepRunner object at 0x7f86e4050278>>
   393	INFO Created /tmp/tmpp4g01364 for Ansible inventory
   394	INFO Created /tmp/tmposvmqdlo for Ansible variables
   395	INFO Exec: ['ansible-playbook', '-c', 'chroot', '-i', '/tmp/tmpp4g01364', '-e', '@/tmp/tmposvmqdlo', 'vmdb2-ansible.yaml']
   396	DEBUG run external command: [['ansible-playbook', '-c', 'chroot', '-i', '/tmp/tmpp4g01364', '-e', '@/tmp/tmposvmqdlo', 'vmdb2-ansible.yaml']]
   397	DEBUG STDOUT: b'\nPLAY [image] *******************************************************************\n'
   398	DEBUG STDOUT: b'\nTASK [Gathering Facts] *********************************************************\n'
   399	DEBUG STDOUT: b'ok: [/tmp/tmpmlmegzhh]\n'
   400	DEBUG STDOUT: b'\nTASK [1/3 disable Apparmor in order to correct LXC startup] ********************\n'
   401	DEBUG STDOUT: b'changed: [/tmp/tmpmlmegzhh]\n'
   402	DEBUG STDERR: b' [WARNING]: Consider using the replace, lineinfile or template module rather\nthan running sed.  If you need to use command because replace, lineinfile or\ntemplate is insufficient you can add warn=False to this command task or set\ncommand_warnings=False in ansible.cfg to get rid of this message.\n'
   403	DEBUG STDOUT: b'\nTASK [2/3 Install python and openssh-server as defined in Debian standard Buster] ***\n'
   404	DEBUG STDOUT: b'changed: [/tmp/tmpmlmegzhh]\n'
   405	DEBUG STDERR: b' [WARNING]: Consider using the apt module rather than running apt-get.  If you\nneed to use command because apt is insufficient you can add warn=False to this\ncommand task or set command_warnings=False in ansible.cfg to get rid of this\nmessage.\n'
   406	DEBUG STDOUT: b'\nTASK [3/3 Install public ssh key into root account] ****************************\n'
   407	DEBUG STDOUT: b'changed: [/tmp/tmpmlmegzhh]\n'
   408	DEBUG STDERR: b' [WARNING]: Consider using the file module with state=directory rather than\nrunning mkdir.  If you need to use command because file is insufficient you can\nadd warn=False to this command task or set command_warnings=False in\nansible.cfg to get rid of this message.\n'
   409	DEBUG STDOUT: b'\nPLAY RECAP *********************************************************************\n'
   410	DEBUG STDOUT: b'/tmp/tmpmlmegzhh           : ok=4    changed=3    unreachable=0    failed=0   \n\n'
   411	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <ansible_plugin.AnsibleStepRunner object at 0x7f86e4050278>>
   412	INFO Running step: {'root-fs': 'root', 'shell': 'umount $ROOT/dev\numount $ROOT/proc\nrm $ROOT/etc/flash-kernel/machine\ndiff vmdb2-ansible.yaml.example vmdb2-ansible.yaml && test -L vmdb2-ansible.yaml && rm vmdb2-ansible.yaml || true'}
   413	INFO Calling <bound method ShellStepRunner.run of <shell_plugin.ShellStepRunner object at 0x7f86e40004e0>>
   414	INFO Exec: ['sh', '-ec', 'umount $ROOT/dev\numount $ROOT/proc\nrm $ROOT/etc/flash-kernel/machine\ndiff vmdb2-ansible.yaml.example vmdb2-ansible.yaml && test -L vmdb2-ansible.yaml && rm vmdb2-ansible.yaml || true']
   415	DEBUG run external command: [['sh', '-ec', 'umount $ROOT/dev\numount $ROOT/proc\nrm $ROOT/etc/flash-kernel/machine\ndiff vmdb2-ansible.yaml.example vmdb2-ansible.yaml && test -L vmdb2-ansible.yaml && rm vmdb2-ansible.yaml || true']]
   416	DEBUG STDOUT: b'1c1\n< # Create a vmdb2-ansible.yaml file for it to be used by vmdb2\n---\n> # Use dedicated Ansible task for personal infra (jeanmarc.lacroix@free.fr)\n6c6\n<     - name: test\n---\n>     - name: 1/3 disable Apparmor in order to correct LXC startup \n8c8,28\n<         echo test\n---\n>         sed  \\\n>           -i \\\n>           \'s/ifnames=0/ifnames=0 apparmor=0 cgroup_enable=memory loglevel=7/g\' \\\n>           /etc/default/flash-kernel \\\n>         && \\\n>         flash-kernel\n> \n>     - name: 2/3 Install python and openssh-server as defined in Debian standard Buster\n>       shell: |\n>         apt-get install -y python openssh-server\n> \n>     - name: 3/3 Install public ssh key into root account\n>       shell: |\n>         mkdir -p /root/.ssh \\\n>           && \\\n>         echo \\\n>           "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAICqkpxBMUFMFqu7vgPCb9ys4HGHP1aobyQDJQ37yFwbR -- ssh-key for ansible@solo samedi 14 d\xc3\xa9cembre 2019, 08:13:33 (UTC+0100) br-ansible.2.7.5-debian-stretch-9.11-dns-android 33cc980c87863820dfa6e23ed24e83a6'
   417	DEBUG STDOUT: b'5ad459e4  --" \\\n>           > /root/.ssh/authorized_keys\n> \n> \n> \n'
   418	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <shell_plugin.ShellStepRunner object at 0x7f86e40004e0>>
   419	INFO Running step: {'create-file': '/etc/resolv.conf', 'contents': ''}
   420	INFO Calling <bound method CreateFileStepRunner.run of <create_file_plugin.CreateFileStepRunner object at 0x7f86e40001d0>>
   421	INFO Creating file /tmp/tmpmlmegzhh//etc/resolv.conf, uid 0, gid 0, perms 644
   422	INFO Calling <bound method StepRunnerInterface.run_even_if_skipped of <create_file_plugin.CreateFileStepRunner object at 0x7f86e40001d0>>
   423	INFO All went fine, cleaning up.
   424	INFO Running teardown: {'create-file': '/etc/resolv.conf', 'contents': ''}
   425	INFO Calling <bound method StepRunnerInterface.teardown of <create_file_plugin.CreateFileStepRunner object at 0x7f86e40001d0>>
   426	INFO Running teardown: {'root-fs': 'root', 'shell': 'umount $ROOT/dev\numount $ROOT/proc\nrm $ROOT/etc/flash-kernel/machine\ndiff vmdb2-ansible.yaml.example vmdb2-ansible.yaml && test -L vmdb2-ansible.yaml && rm vmdb2-ansible.yaml || true'}
   427	INFO Calling <bound method StepRunnerInterface.teardown of <shell_plugin.ShellStepRunner object at 0x7f86e40004e0>>
   428	INFO Running teardown: {'ansible': 'root', 'playbook': 'vmdb2-ansible.yaml'}
   429	INFO Calling <bound method AnsibleStepRunner.teardown of <ansible_plugin.AnsibleStepRunner object at 0x7f86e4050278>>
   430	INFO Removing /tmp/tmpp4g01364
   431	INFO Running teardown: {'root-fs': 'root', 'shell': 'test -e vmdb2-ansible.yaml || ln -s vmdb2-ansible.yaml.example vmdb2-ansible.yaml\nmount -t proc proc $ROOT/proc\nmount -o bind /dev $ROOT/dev'}
   432	INFO Calling <bound method StepRunnerInterface.teardown of <shell_plugin.ShellStepRunner object at 0x7f86e40004e0>>
   433	INFO Running teardown: {'create-file': '/etc/network/interfaces.d/eth0', 'contents': 'auto eth0\niface eth0 inet dhcp\n'}
   434	INFO Calling <bound method StepRunnerInterface.teardown of <create_file_plugin.CreateFileStepRunner object at 0x7f86e40001d0>>
   435	INFO Running teardown: {'create-file': '/etc/network/interfaces.d/lo', 'contents': 'auto lo\niface lo inet loopback\n'}
   436	INFO Calling <bound method StepRunnerInterface.teardown of <create_file_plugin.CreateFileStepRunner object at 0x7f86e40001d0>>
   437	INFO Running teardown: {'root-fs': 'root', 'shell': 'dd conv=fsync,notrunc if=$ROOT/usr/lib/u-boot/Cubietruck/u-boot-sunxi-with-spl.bin of=cubietruck_buster_armhf.img bs=1024 seek=8'}
   438	INFO Calling <bound method StepRunnerInterface.teardown of <shell_plugin.ShellStepRunner object at 0x7f86e40004e0>>
   439	INFO Running teardown: {'apt': 'install', 'packages': ['u-boot-sunxi'], 'tag': 'root'}
   440	INFO Calling <bound method StepRunnerInterface.teardown of <apt_plugin.AptStepRunner object at 0x7f86e4050128>>
   441	INFO Running teardown: {'chroot': 'root', 'shell': 'apt-get install -y -t buster-backports wireless-regdb\napt-get install -y crda\n\nsed -i s_errors=remount-ro_noatime,nodiratime,errors=remount-ro_g /etc/fstab\n\nsed -i "s_quiet_root=$(grep ^UUID /etc/fstab | cut -d \\  -f 1) net.ifnames=0_g" /etc/default/flash-kernel\nupdate-initramfs -c -k $(ls -l /vmlinuz | sed "s%^.*vmlinuz-\\(.*\\)$%\\1%g")\numount /dev\n\nsed -i "s_root:\\*:_root::_g" /etc/shadow'}
   442	INFO Calling <bound method StepRunnerInterface.teardown of <chroot_plugin.ChrootStepRunner object at 0x7f86e4078c50>>
   443	INFO Running teardown: {'root-fs': 'root', 'shell': 'mount -o bind /dev $ROOT/dev'}
   444	INFO Calling <bound method StepRunnerInterface.teardown of <shell_plugin.ShellStepRunner object at 0x7f86e40004e0>>
   445	INFO Running teardown: {'create-file': '/etc/flash-kernel/machine', 'contents': 'Cubietech Cubietruck\n'}
   446	INFO Calling <bound method StepRunnerInterface.teardown of <create_file_plugin.CreateFileStepRunner object at 0x7f86e40001d0>>
   447	INFO Running teardown: {'create-file': '/lib/firmware/brcm/brcmfmac43362-sdio.txt', 'contents': '#AP6210_NVRAM_V1.2_03192013\nmanfid=0x2d0\nprodid=0x492\nvendid=0x14e4\ndevid=0x4343\nboardtype=0x0598\n\n# Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same\n#Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305\nboardrev=0x1307\nboardnum=777\nxtalfreq=26000\nboardflags=0x80201\nboardflags2=0x80\nsromrev=3\nwl0id=0x431b\nmacaddr=00:90:4c:07:71:12\naa2g=1\nag0=2\nmaxp2ga0=74\ncck2gpo=0x2222\nofdm2gpo=0x44444444\nmcs2gpo0=0x6666\nmcs2gpo1=0x6666\npa0maxpwr=56\n\n#P207 PA params\n#pa0b0=5447\n#pa0b1=-658\n#pa0b2=-175<div></div>\n\n#Same PA params for P304,P305, P306, P307\n\npa0b0=5447\npa0b1=-607\npa0b2=-160\npa0itssit=62\npa1itssit=62\n\n\ncckPwrOffset=5\nccode=0\nrssismf2g=0xa\nrssismc2g=0x3\nrssisav2g=0x7\ntriso2g=0\nnoise_cal_enable_2g=0\nnoise_cal_po_2g=0\nswctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff\ntemp_add=29767\ntemp_mult=425\n\nbtc_flags=0x6\nbtc_params0=5000\nbtc_params1=1000\nbtc_params6=63\n'}
   448	INFO Calling <bound method StepRunnerInterface.teardown of <create_file_plugin.CreateFileStepRunner object at 0x7f86e40001d0>>
   449	INFO Running teardown: {'chroot': 'root', 'shell': 'apt-get install -y -t buster-backports firmware-brcm80211'}
   450	INFO Calling <bound method StepRunnerInterface.teardown of <chroot_plugin.ChrootStepRunner object at 0x7f86e4078c50>>
   451	INFO Running teardown: {'fstab': 'root'}
   452	INFO Calling <bound method StepRunnerInterface.teardown of <fstab_plugin.FstabStepRunner object at 0x7f86e40002b0>>
   453	INFO Running teardown: {'create-file': '/etc/hostname', 'contents': 'Cubietruck\n'}
   454	INFO Calling <bound method StepRunnerInterface.teardown of <create_file_plugin.CreateFileStepRunner object at 0x7f86e40001d0>>
   455	INFO Running teardown: {'cache-rootfs': 'root', 'unless': 'rootfs_unpacked'}
   456	INFO Skipping as requested by unless
   457	INFO Running teardown: {'apt': 'install', 'packages': ['flash-kernel'], 'tag': 'root', 'unless': 'rootfs_unpacked'}
   458	INFO Skipping as requested by unless
   459	INFO Running teardown: {'chroot': 'root', 'shell': 'echo "deb http://ftp.de.debian.org/debian buster main contrib non-free" > /etc/apt/sources.list\necho "deb http://security.debian.org/ buster/updates main contrib non-free" >> /etc/apt/sources.list\necho "deb http://ftp.de.debian.org/debian buster-updates main contrib non-free" >> /etc/apt/sources.list\necho "deb http://ftp.de.debian.org/debian buster-backports main contrib non-free" >> /etc/apt/sources.list\napt-get update\nmv /etc/kernel/postinst.d/initramfs-tools /\napt-get install -y -t buster-backports linux-image-armmp-lpae\nmv /initramfs-tools /etc/kernel/postinst.d/', 'unless': 'rootfs_unpacked'}
   460	INFO Skipping as requested by unless
   461	INFO Running teardown: {'apt': 'install', 'packages': ['initramfs-tools'], 'tag': 'root', 'unless': 'rootfs_unpacked'}
   462	INFO Skipping as requested by unless
   463	INFO Running teardown: {'qemu-debootstrap': 'buster', 'mirror': 'http://ftp.de.debian.org/debian', 'target': 'root', 'arch': 'armhf', 'components': ['main', 'contrib', 'non-free'], 'unless': 'rootfs_unpacked'}
   464	INFO Skipping as requested by unless
   465	INFO Running teardown: {'unpack-rootfs': 'root'}
   466	INFO Calling <bound method StepRunnerInterface.teardown of <unpack_rootfs_plugin.UnpackCacheStepRunner object at 0x7f86e40005f8>>
   467	INFO Running teardown: {'mount': 'root'}
   468	INFO Calling <bound method MountStepRunner.teardown of <mount_plugin.MountStepRunner object at 0x7f86e40005c0>>
   469	INFO Exec: ['umount', '/tmp/tmpmlmegzhh']
   470	DEBUG run external command: [['umount', '/tmp/tmpmlmegzhh']]
   471	INFO Running teardown: {'mkfs': 'ext4', 'partition': 'root'}
   472	INFO Calling <bound method StepRunnerInterface.teardown of <mkfs_plugin.MkfsStepRunner object at 0x7f86e40003c8>>
   473	INFO Running teardown: {'kpartx': 'cubietruck_buster_armhf.img'}
   474	INFO Calling <bound method KpartxStepRunner.teardown of <kpartx_plugin.KpartxStepRunner object at 0x7f86e4000320>>
   475	INFO Exec: ['kpartx', '-dsv', 'cubietruck_buster_armhf.img']
   476	DEBUG run external command: [['kpartx', '-dsv', 'cubietruck_buster_armhf.img']]
   477	DEBUG STDERR: b'loop deleted : /dev/loop0\n'
   478	DEBUG STDOUT: b'del devmap : loop0p1\n'
   479	INFO Running teardown: {'mkpart': 'primary', 'device': 'cubietruck_buster_armhf.img', 'start': '0%', 'end': '100%', 'tag': 'root'}
   480	INFO Calling <bound method StepRunnerInterface.teardown of <mkpart_plugin.MkpartStepRunner object at 0x7f86e4000470>>
   481	INFO Running teardown: {'mklabel': 'msdos', 'device': 'cubietruck_buster_armhf.img'}
   482	INFO Calling <bound method StepRunnerInterface.teardown of <mklabel_plugin.MklabelStepRunner object at 0x7f86e4000518>>
   483	INFO Running teardown: {'mkimg': 'cubietruck_buster_armhf.img', 'size': '3G'}
   484	INFO Calling <bound method StepRunnerInterface.teardown of <mkimg_plugin.MkimgStepRunner object at 0x7f86e4000400>>
   485	INFO vmdb2 version 0.14.1 ends normally


Il reste donc à flasher ....(Attention au device /dev/sdc !)

Code : Tout sélectionner

sudo dd if=./cubietruck_buster_armhf.img of=/dev/sdc bs=1M status=progress;sync
3215982592 bytes (3.2 GB, 3.0 GiB) copied, 153 s, 21.0 MB/s
3072+0 records in
3072+0 records out
3221225472 bytes (3.2 GB, 3.0 GiB) copied, 223.864 s, 14.4 MB/s

Suite à installation de la SD dans la cible, la connexion en directe sur le TTY de la cible (via l'outil minicom) permet à travers la commande suivante de vérifier la séquence de démarrage ... (je vous laisse faire les adaptations selon votre environnement...)

Code : Tout sélectionner

 /usr/bin/minicom \
   --color=on \
   --statline \
   --baudrate=115200 \
   --8bit \
   --capturefile=/tmp/tty-from-srv-cubietruck-120-2020-06-10-14h-16min.ok \
   --wrap \
   --device /dev/tty-target-srv-cubietruck-120-position-1.2.4.4.1

Code : Tout sélectionner

HELLO! BOOT0 is starting!
boot0 version : 2.0.0˜
read dram para.
dram driver version: 1.15
dram size =2048MB
0x0018699a
super_standby_flag = 0
Succeed in opening nand flash.
block from 2 to 6
deal block 2
Succeed in reading Boot1 file head.
The size of Boot1 is 0x00068000.
The file stored in 0x00000000 of block 2 is perfect.
Check is correct.
Ready to disable icache.
Succeed in loading Boot1.
Jump to Boot1.
[       0.148] boot1 version : 2.0.0
[       0.148] script installed early ok
[       0.149] pmu type = 3
[       0.253] bat vol = 4191 mv
[       0.269] axi:ahb:apb=4:2:2
[       0.269] set dcdc2=1450mv, clock=912M successed
[       0.271] key
[       0.284] no key found
[       0.284] flash init start
[       0.284] NB1 : enter NFB_Init
[       0.287] NB1 : enter phy init
[       0.290] [NAND] nand driver(b) version: 0x0x00000002, 0x0x00000012, data: 0x20130627
[       0.298] get the good blk ratio from hwscan : 912 
[       0.303] NB1 : nand phy init ok
[       1.697] _RepairLogBlkTbl start
[       1.699] Log Block Index 0x00000000, LogicBlockNum: 0x00000018, LogBlockType: 0x00000000
[       1.703] log0: 0x00000722, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       1.710] datablock: 0x00000749, lastusedpage: 0x00000059
[       1.717] Log Block Index 0x00000001, LogicBlockNum: 0x00000021, LogBlockType: 0x00000000
[       1.724] log0: 0x00000753, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       1.730] datablock: 0x0000076d, lastusedpage: 0x0000000a
[       1.738] Log Block Index 0x00000002, LogicBlockNum: 0x00000037, LogBlockType: 0x00000000
[       1.744] log0: 0x00000775, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       1.751] datablock: 0x00000714, lastusedpage: 0x00000001
[       1.758] Log Block Index 0x00000003, LogicBlockNum: 0x00000014, LogBlockType: 0x00000000
[       1.765] log0: 0x00000755, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       1.772] datablock: 0x0000077b, lastusedpage: 0x0000009d
[       1.779] Log Block Index 0x00000004, LogicBlockNum: 0x00000015, LogBlockType: 0x00000000
[       1.786] log0: 0x0000078e, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       1.792] datablock: 0x00000719, lastusedpage: 0x00000005
[       1.800] Log Block Index 0x00000005, LogicBlockNum: 0x00000017, LogBlockType: 0x00000000
[       1.806] log0: 0x00000738, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       1.813] datablock: 0x00000799, lastusedpage: 0x00000000
[       1.820] Log Block Index 0x00000006, LogicBlockNum: 0x000000d4, LogBlockType: 0x00000000
[       1.827] log0: 0x0000078b, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       1.834] datablock: 0x000007a1, lastusedpage: 0x000000f5
[       1.841] Log Block Index 0x00000007, LogicBlockNum: 0x000001e3, LogBlockType: 0x00000000
[       1.848] log0: 0x00000761, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       1.854] datablock: 0x000007a9, lastusedpage: 0x00000001
[       1.862] Log Block Index 0x00000008, LogicBlockNum: 0x000001e5, LogBlockType: 0x00000000
[       1.868] log0: 0x000007aa, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       1.875] datablock: 0x0000074b, lastusedpage: 0x00000006
[       1.883] Log Block Index 0x00000009, LogicBlockNum: 0x0000002c, LogBlockType: 0x00000000
[       1.889] log0: 0x0000078f, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       1.895] datablock: 0x000007ad, lastusedpage: 0x00000008
[       1.903] Log Block Index 0x0000000a, LogicBlockNum: 0x0000001b, LogBlockType: 0x00000000
[       1.909] log0: 0x000006ed, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       1.916] datablock: 0x000007b3, lastusedpage: 0x000000d3
[       1.924] Log Block Index 0x0000000b, LogicBlockNum: 0x000001db, LogBlockType: 0x00000000
[       1.930] log0: 0x00000743, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       1.937] datablock: 0x000007c5, lastusedpage: 0x00000002
[       1.944] Log Block Index 0x0000000c, LogicBlockNum: 0x000001d5, LogBlockType: 0x00000000
[       1.951] log0: 0x00000781, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       1.957] datablock: 0x000007e0, lastusedpage: 0x0000000c
[       1.965] Log Block Index 0x0000000d, LogicBlockNum: 0x00000034, LogBlockType: 0x00000000
[       1.971] log0: 0x000007ee, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       1.978] datablock: 0x0000071d, lastusedpage: 0x00000003
[       1.986] Log Block Index 0x0000000e, LogicBlockNum: 0x0000003a, LogBlockType: 0x00000000
[       1.992] log0: 0x0000074f, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       1.999] datablock: 0x000007f4, lastusedpage: 0x00000000
[       2.006] Log Block Index 0x0000000f, LogicBlockNum: 0x00000038, LogBlockType: 0x00000000
[       2.013] log0: 0x000007f0, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       2.019] datablock: 0x000007f6, lastusedpage: 0x00000004
[       2.026] Log Block Index 0x00000000, LogicBlockNum: 0x00000281, LogBlockType: 0x00000000
[       2.033] log0: 0x000007b9, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       2.040] datablock: 0x000005a8, lastusedpage: 0x000000fb
[       2.047] Log Block Index 0x00000001, LogicBlockNum: 0x00000280, LogBlockType: 0x00000000
[       2.054] log0: 0x000007c1, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       2.060] datablock: 0x000005a7, lastusedpage: 0x000000ff
[       2.067] Log Block Index 0x00000002, LogicBlockNum: 0x0000027f, LogBlockType: 0x00000000
[       2.074] log0: 0x000007c7, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       2.081] datablock: 0x000005a6, lastusedpage: 0x000000ff
[       2.088] Log Block Index 0x00000003, LogicBlockNum: 0x00000085, LogBlockType: 0x00000000
[       2.095] log0: 0x000007d1, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       2.102] datablock: 0x000003ab, lastusedpage: 0x000000f7
[       2.109] Log Block Index 0x00000004, LogicBlockNum: 0x00000084, LogBlockType: 0x00000000
[       2.116] log0: 0x000007d7, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       2.122] datablock: 0x000003aa, lastusedpage: 0x000000ff
[       2.129] Log Block Index 0x00000005, LogicBlockNum: 0x00000083, LogBlockType: 0x00000000
[       2.136] log0: 0x000007db, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       2.143] datablock: 0x000003a9, lastusedpage: 0x000000ff
[       2.150] Log Block Index 0x00000006, LogicBlockNum: 0x00000082, LogBlockType: 0x00000000
[       2.157] log0: 0x000007e1, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       2.164] datablock: 0x000003a8, lastusedpage: 0x000000ff
[       2.170] Log Block Index 0x00000007, LogicBlockNum: 0x00000081, LogBlockType: 0x00000000
[       2.178] log0: 0x000007ed, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       2.184] datablock: 0x000003a7, lastusedpage: 0x000000ff
[       2.191] Log Block Index 0x00000008, LogicBlockNum: 0x00000080, LogBlockType: 0x00000000
[       2.198] log0: 0x000007f1, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       2.205] datablock: 0x000003a6, lastusedpage: 0x000000ff
[       2.213] Log Block Index 0x00000009, LogicBlockNum: 0x0000007e, LogBlockType: 0x00000000
[       2.219] log0: 0x000007f5, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       2.225] datablock: 0x000003ac, lastusedpage: 0x000000f8
[       2.232] Log Block Index 0x0000000a, LogicBlockNum: 0x0000027e, LogBlockType: 0x00000000
[       2.239] log0: 0x000007f9, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       2.246] datablock: 0x000005ae, lastusedpage: 0x000000fe
[       2.253] Log Block Index 0x0000000b, LogicBlockNum: 0x0000007f, LogBlockType: 0x00000000
[       2.260] log0: 0x000007fa, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       2.267] datablock: 0x000003a5, lastusedpage: 0x000000ff
[       2.275] Log Block Index 0x0000000c, LogicBlockNum: 0x0000029e, LogBlockType: 0x00000000
[       2.281] log0: 0x000007fb, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       2.287] datablock: 0x000005ce, lastusedpage: 0x0000001c
[       2.293] _RepairLogBlkTbl end
[       2.314] NB1 : init ok
[       2.314] flash init finish
[       2.315] fs init ok
[       2.317] fattype FAT16
[       2.319] fs mount ok
[       2.323] nand good_block_ratio=912
[       2.325] storage_type=0
[       2.336] 0
[       2.337] set pc
[       2.337] usbdc_vol = 4000, usbdc_cur = 0
[       2.338] usbpc_vol = 4200, usbpc_cur = 0
[       2.343] init to usb pc
[       2.345] set pc
[       2.426] key value = 0
[       2.426] recovery key high 40, low 4
[       2.440] show pic finish
[       2.440] load kernel start
[       2.456] load kernel successed
[       2.456] start address = 0x4a000000
[       2.764] power exit detect

U-Boot 2011.09-rc1-00000-gf75abad-dirty (Oct 21 2013 - 18:44:22) Allwinner Technology 

CPU:   SUNXI Family
Board: A20-Cubietruck
DRAM:  2 GiB
NAND:  NB1 : enter NFB_Init
[NAND] nand driver(b) version: 0x2, 0x12, data: 20130526
[NAND] set nand_good_block_ratio 912 
NB1 : nand phy init ok
NB1 : init ok
3200 MiB
Using default environment

In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
-total partitions:3-
-name-        -start-       -size-      
bootloader  : 8000          20000       
rootfs      : 28000         600000      
UDISK       : 628000        18000       
-----------------------------------
no misc partition is found
Hit any key to stop autoboot:  1  0 
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
reading /uEnv.txt

177 bytes read
## Warning: defaulting to text format
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
reading /script.bin

46284 bytes read
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
reading /uImage

4956376 bytes read
## Booting kernel from Legacy Image at 48000000 ...
   Image Name:   Linux-3.4.79
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4956312 Bytes = 4.7 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Using machid 0x10bb from environment

Starting kernel ...

<6>Booting Linux on physical CPU 0
<6>Initializing cgroup subsys cpuset
<6>Initializing cgroup subsys cpu
<5>Linux version 3.4.79 (aaron@cubietech) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP PREEMPT Mon Oct 20 00:02:59 CST 2014
CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun7i
<6>Memory Reserved:
<6>	SYS  : 0x43000000 - 0x4300ffff  (  64 kB)
<6>	VE   : 0x44000000 - 0x48ffffff  (  80 MB)
<6>	G2D  : 0x49000000 - 0x49ffffff  (  16 MB)
<6>	LCD  : 0x4a000000 - 0x4bffffff  (  32 MB)
Memory policy: ECC disabled, Data cache writealloc
<6>sunxi: Allwinner A20 (AW1651/sun7i) detected.
<7>On node 0 totalpages: 524288
<7>free_area_init_node: node 0, pgdat c09f4540, node_mem_map d0000000
<7>  DMA zone: 512 pages used for memmap
<7>  DMA zone: 0 pages reserved
<7>  DMA zone: 65024 pages, LIFO batch:15
<7>  Normal zone: 1008 pages used for memmap
<7>  Normal zone: 128016 pages, LIFO batch:31
<7>  HighMem zone: 2576 pages used for memmap
<7>  HighMem zone: 327152 pages, LIFO batch:31
<6>PERCPU: Embedded 7 pages/cpu @d100e000 s7040 r8192 d13440 u32768
<7>pcpu-alloc: s7040 r8192 d13440 u32768 alloc=8*4096<c>
<7>pcpu-alloc: <c>[0] <c>0 <c>[0] <c>1 <c>
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520192
<5>Kernel command line: console=tty0 root=/dev/nandb loglevel=8 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1280x720p50 rootwait panic=10 rootfstype=ext4 rootflags=discard
<6>PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>allocated 4194304 bytes of page_cgroup
<6>please try 'cgroup_disable=memory' option if you don't want memory cgroups
<6>Memory: 2048MB = 2048MB total
<5>Memory: 1932580k/1932580k available, 164572k reserved, 1318912K highmem
<5>Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc092f150   (9373 kB)
      .init : 0xc0930000 - 0xc0964b80   ( 211 kB)
      .data : 0xc0966000 - 0xc09fd7f8   ( 606 kB)
       .bss : 0xc09fd81c - 0xc0bbc078   (1787 kB)
<6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>Preemptible hierarchical RCU implementation.
<6>	RCU dyntick-idle grace-period acceleration is enabled.
<6>	Additional per-CPU info printed with stalls.
<6>NR_IRQS:192
<6>Architected local timer running at 24.00MHz.
<6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<2>start_kernel(): bug: interrupts were enabled early
<6>Console: colour dummy device 80x30
<6....
Aie ! ... un souci majeur puisque ce n'est pas l'OS que je viens de construire sur la SD qui boote, mais la version Android originale ... :evil:
A voir donc ...
Cordialement

jeanmarc
Messages : 40
Enregistré le : dim. mars 22, 2020 5:28 pm
Localisation : Essonne

Re: [cubietruck] [debian] 5.5.0-0.bpo.2-armmp-lpae KO

Message par jeanmarc »

Bonjour,

Merci à Jérôme pour son analyse des logs précédents.
Il semble donc y avoir un soucis au niveau de l'update/upgrade lors de la fabrication du rootfs, je lui laisse décrire la théorie de la chose (!).
La méthode rapide, peu scientifique, mais redoutable en matière d'efficacité consiste en effet à supprimer les éléments actifs dans le chemin de données de la fabrication d'image
Le premier élément étant précisément le cache utilisé par le projet VMDB2.
Ce cache, fonction de l’architecture de la cible est simplement supprimé via la commande rm buster_armhf_rootfs.tgz.

A l'issue de commande, relance et création d'une nouvelle flash, puis test, le résultat du log (boot+kernel) est ci-dessous.

Code : Tout sélectionner




U-Boot SPL 2019.01+dfsg-7 (May 14 2019 - 02:07:44 +0000)
DRAM: 2048 MiB
CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC1


U-Boot 2019.01+dfsg-7 (May 14 2019 - 02:07:44 +0000) Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
Model: Cubietech Cubietruck
I2C:   ready
DRAM:  2 GiB
MMC:   SUNXI SD/MMC: 0
Loading Environment from FAT... Unable to use mmc 0:1... Setting up a 1024x768 vga console (overscan 0x0)
In:    serial
Out:   vga
Err:   vga
Allwinner mUSB OTG (Peripheral)
SCSI:  Target spinup took 0 ms.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst 

Net:   eth0: ethernet@1c50000
Warning: usb_ether using MAC address from ROM
, eth1: usb_ether
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
USB2:   USB EHCI 1.00
USB3:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  2  1  0 
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
2730 bytes read in 15 ms (177.7 KiB/s)
## Executing script at 43100000
Mainline u-boot / new-style environment detected.
4817408 bytes read in 277 ms (16.6 MiB/s)
27246 bytes read in 18 ms (1.4 MiB/s)
20895976 bytes read in 1169 ms (17 MiB/s)
Booting Debian 5.5.0-0.bpo.2-armmp-lpae from mmc 0:1...
## Flattened Device Tree blob at 43000000
   Booting using the fdt blob at 0x43000000
EHCI failed to shut down host controller.
EHCI failed to shut down host controller.
   Loading Ramdisk to 48c12000, end 49fff8e8 ... OK
   Loading Device Tree to 48c08000, end 48c11a6d ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.5.0-0.bpo.2-armmp-lpae (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 5.5.17-1~bpo10+1 (2020-04-23)
[    0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=30c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Cubietech Cubietruck
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x000000004a000000, size 96 MiB
[    0.000000] OF: reserved mem: initialized node default-pool, compatible id shared-dma-pool
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] percpu: Embedded 21 pages/cpu s54028 r8192 d23796 u86016
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 521216
[    0.000000] Kernel command line: console=ttyS0,115200 root=UUID=80617b0b-8c9f-409a-8916-66a3607e2aaa net.ifnames=0 apparmor=0 cgroup_enable=memory loglevel=7
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x6a6ca000-0x6e6ca000] (64MB)
[    0.000000] Memory: 1865644K/2094080K available (10240K kernel code, 1226K rwdata, 3156K rodata, 2048K init, 332K bss, 130132K reserved, 98304K cma-reserved, 1307648K highmem)
[    0.000000] random: get_random_u32 called from __kmem_cache_create+0x44/0x518 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] ftrace: allocating 36672 entries in 72 pages
[    0.000000] ftrace: allocated 72 pages with 2 groups
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000022] Switching to timer-based delay loop, resolution 41ns
[    0.001612] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.002759] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370868154 ns
[    0.003654] Console: colour dummy device 80x30
[    0.003737] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.003755] pid_max: default: 32768 minimum: 301
[    0.004127] LSM: Security Framework initializing
[    0.004250] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.004315] SELinux:  Initializing.
[    0.004458] TOMOYO Linux initialized
[    0.004572] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.004591] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.006133] CPU: Testing write buffer coherency: ok
[    0.006858] /cpus/cpu@0 missing clock-frequency property
[    0.006891] /cpus/cpu@1 missing clock-frequency property
[    0.006906] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.007841] Setting up static identity map for 0x40400000 - 0x404000ac
[    0.009388] rcu: Hierarchical SRCU implementation.
[    0.013374] EFI services will not be available.
[    0.014082] smp: Bringing up secondary CPUs ...
[    0.025216] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.025465] smp: Brought up 1 node, 2 CPUs
[    0.025483] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[    0.025491] CPU: All CPU(s) started in HYP mode.
[    0.025497] CPU: Virtualization extensions available.
[    0.027304] devtmpfs: initialized
[    0.036941] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[    0.037728] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.037770] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.043216] pinctrl core: initialized pinctrl subsystem
[    0.044955] thermal_sys: Registered thermal governor 'fair_share'
[    0.044963] thermal_sys: Registered thermal governor 'step_wise'
[    0.045624] DMI not present or invalid.
[    0.046281] NET: Registered protocol family 16
[    0.049295] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.050558] audit: initializing netlink subsys (disabled)
[    0.053006] No ATAGs?
[    0.053148] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[    0.053210] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.053219] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.054644] Serial: AMBA PL011 UART driver
[    0.081100] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    1.671592] iommu: Default domain type: Translated 
[    1.672896] vgaarb: loaded
[    1.674300] mc: Linux media interface: v0.10
[    1.674360] videodev: Linux video capture interface: v2.00
[    1.674430] pps_core: LinuxPPS API ver. 1 registered
[    1.674439] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.674474] PTP clock support registered
[    1.677372] clocksource: Switched to clocksource arch_sys_counter
[    1.785989] VFS: Disk quotas dquot_6.6.0
[    1.786124] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.787792] simple-framebuffer bfd00000.framebuffer: framebuffer at 0xbfd00000, 0x300000 bytes, mapped to 0x(ptrval)
[    1.787817] simple-framebuffer bfd00000.framebuffer: format=x8r8g8b8, mode=1024x768x32, linelength=4096
[    1.802482] Console: switching to colour frame buffer device 128x48
[    1.816179] simple-framebuffer bfd00000.framebuffer: fb0: simplefb registered!
[    1.830598] NET: Registered protocol family 2
[    1.831711] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    1.831762] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    1.831845] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.831973] TCP: Hash tables configured (established 8192 bind 8192)
[    1.832152] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.832224] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.832548] NET: Registered protocol family 1
[    1.832588] NET: Registered protocol family 44
[    1.832610] PCI: CLS 0 bytes, default 64
[    1.833310] Trying to unpack rootfs image as initramfs...
[    3.564138] Freeing initrd memory: 20408K
[    3.565292] kvm [1]: vgic interrupt IRQ16
[    3.565710] kvm [1]: Hyp mode initialized successfully
[    3.566827] hw perfevents: no interrupt-affinity property for /pmu, guessing.
[    3.567131] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    3.569889] Initialise system trusted keyrings
[    3.569974] Key type blacklist registered
[    3.570448] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    3.581537] zbud: loaded
[    3.583750] Platform Keyring initialized
[    3.583791] Key type asymmetric registered
[    3.583803] Asymmetric key parser 'x509' registered
[    3.583881] bounce: pool size: 64 pages
[    3.583991] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    3.584409] io scheduler mq-deadline registered
[    3.591220] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pi not found, using dummy regulator
[    3.594068] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    3.616723] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    3.620083] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pb not found, using dummy regulator
[    3.620864] printk: console [ttyS0] disabled
[    3.641192] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 50, base_baud = 1500000) is a U6_16550A
[    4.398220] printk: console [ttyS0] enabled
[    4.424277] 1c28800.serial: ttyS1 at MMIO 0x1c28800 (irq = 51, base_baud = 1500000) is a U6_16550A
[    4.433639] serial serial0: tty port ttyS1 registered
[    4.439748] Serial: AMBA driver
[    4.444943] STM32 USART driver initialized
[    4.453087] libphy: Fixed MDIO Bus: probed
[    4.458315] mousedev: PS/2 mouse device common for all mice
[    4.467418] sunxi-rtc 1c20d00.rtc: registered as rtc0
[    4.476106] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-ph not found, using dummy regulator
[    4.486773] ledtrig-cpu: registered to indicate activity on CPUs
[    4.494165] drop_monitor: Initializing network drop monitor service
[    4.501715] NET: Registered protocol family 10
[    4.605452] Segment Routing with IPv6
[    4.609253] mip6: Mobile IPv6
[    4.612291] NET: Registered protocol family 17
[    4.617140] mpls_gso: MPLS GSO support
[    4.621122] ThumbEE CPU extension supported.
[    4.625471] Registering SWP/SWPB emulation handler
[    4.630985] registered taskstats version 1
[    4.635198] Loading compiled-in X.509 certificates
[    5.014799] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    5.023728] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[    5.030408] zswap: loaded using pool lzo/zbud
[    5.035719] Key type ._fscrypt registered
[    5.039837] Key type .fscrypt registered
[    5.068488] sunxi-rtc 1c20d00.rtc: setting system clock to 2020-06-13T20:20:26 UTC (1592079626)
[    5.090627] Freeing unused kernel memory: 2048K
[    5.098052] Checked W+X mappings: passed, no W+X pages found
[    5.103769] Run /init as init process
Loading, please wait...
Starting version 241
[    6.069905] sunxi_mmc: module verification failed: signature and/or required key missing - tainting kernel
[    6.143139] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator
[    6.156695] usbcore: registered new interface driver usbfs
[    6.175095] usbcore: registered new interface driver hub
[    6.193938] SCSI subsystem initialized
[    6.198588] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    6.201775] usbcore: registered new device driver usb
[    6.224021] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.251840] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
[    6.271444] axp20x-i2c 0-0034: AXP20x variant AXP209 found
[    6.278819] ehci-platform: EHCI generic platform driver
[    6.278971] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.311951] sunxi-mmc 1c12000.mmc: allocated mmc-pwrseq
[    6.328964] mmc0: host does not support reading read-only switch, assuming write-enable
[    6.346701] sun4i-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pa not found, using dummy regulator
[    6.365889] mmc0: new high speed SDHC card at address aaaa
[    6.370673] ohci-platform: OHCI generic platform driver
[    6.377500] sunxi-mmc 1c12000.mmc: initialized, max. request size: 16384 KB
[    6.379530] axp20x-i2c 0-0034: AXP20X driver loaded
[    6.397855] mmcblk0: mmc0:aaaa SC16G 14.8 GiB 
[    6.404143] sun7i-dwmac 1c50000.ethernet: IRQ eth_wake_irq not found
[    6.410633] sun7i-dwmac 1c50000.ethernet: IRQ eth_lpi not found
[    6.424907] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    6.432285] ahci-sunxi 1c18000.sata: 1c18000.sata supply ahci not found, using dummy regulator
[    6.454777] ahci-sunxi 1c18000.sata: 1c18000.sata supply phy not found, using dummy regulator
[    6.465435]  mmcblk0: p1
[    6.469877] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    6.470017] sun7i-dwmac 1c50000.ethernet: PTP uses main clock
[    6.477130] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    6.481519] sun7i-dwmac 1c50000.ethernet: no reset control found
[    6.493048] sun7i-dwmac 1c50000.ethernet: no regulator found
[    6.499360] sun7i-dwmac 1c50000.ethernet: Version ID not available
[    6.505751] sun7i-dwmac 1c50000.ethernet: 	DWMAC1000
[    6.510842] sun7i-dwmac 1c50000.ethernet: DMA HW capability register supported
[    6.518133] sun7i-dwmac 1c50000.ethernet: Normal descriptors
[    6.523857] sun7i-dwmac 1c50000.ethernet: Ring mode enabled
[    6.526942] random: fast init done
[    6.533515] libphy: stmmac: probed
[    6.533542] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[    6.544582] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
[    6.553545] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    6.579657] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    6.586967] mmc1: new high speed SDIO card at address 0001
[    6.588700] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc 
[    6.608166] scsi host0: ahci-sunxi
[    6.614094] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 37
[    6.713164] axp20x-gpio axp20x-gpio: DMA mask not set
[    6.713223] ldo1: supplied by regulator-dummy
[    6.723251] axp20x-gpio axp20x-gpio: AXP209 pinctrl and GPIO driver loaded
[    6.752209] axp20x-usb-power-supply axp20x-usb-power-supply: DMA mask not set
[    6.766182] ldo2: supplied by regulator-dummy
[    6.772341] ldo3: supplied by regulator-dummy
[    6.778086] ldo4: supplied by regulator-dummy
[    6.783330] ldo5: supplied by regulator-dummy
[    6.788988] dcdc2: supplied by regulator-dummy
[    6.794842] dcdc3: supplied by regulator-dummy
[    6.945729] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    6.952618] ata1.00: ATA-9: CJ325120JC, 1.094.12, max UDMA/100
[    6.958534] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32)
[    6.965323] ata1.00: configured for UDMA/100
[    6.970471] scsi 0:0:0:0: Direct-Access     ATA      CJ325120JC       4.12 PQ: 0 ANSI: 5
[    7.000545] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    7.008301] sd 0:0:0:0: [sda] Write Protect is off
[    7.013311] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.048349]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 >
[    7.074751] sd 0:0:0:0: [sda] Attached SCSI disk
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.33.1
[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1 
/dev/mmcblk0p1: clean, 22097/196608 files, 188391/786176 blocks
done.
[    7.770493] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[    8.103129] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
SELinux:  Could not open policy file <= /etc/selinux/targeted/policy/policy.32:  No such file or directory
[    8.726192] systemd[1]: Inserted module 'autofs4'
[    8.798185] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    8.820524] systemd[1]: Detected architecture arm.

Welcome to Debian GNU/Linux 10 (buster)!

[    8.892194] systemd[1]: Set hostname to <Cubietruck>.
[    9.849661] random: systemd: uninitialized urandom read (16 bytes read)
[    9.864972] random: systemd: uninitialized urandom read (16 bytes read)
[    9.877276] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[    9.897782] random: systemd: uninitialized urandom read (16 bytes read)
[    9.906388] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[    9.922868] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[    9.942771] systemd[1]: Listening on Syslog Socket.
[  OK  ] Listening on Syslog Socket.
[    9.966541] systemd[1]: Created slice system-getty.slice.
[  OK  ] Created slice system-getty.slice.
[    9.988331] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[   10.020590] systemd[1]: Starting Load Kernel Modules...
         Starting Load Kernel Modules...
         Starting Create list of re…odes for the current kernel...
         Mounting POSIX Message Queue File System...
[  OK  ] Listening on initctl Compatibility Named Pipe.
[  OK  ] Reached target Swap.
[  OK  ] Set up automount Arbitrary…s File System Automount Point.
[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
[  OK  ] Listening on udev Control Socket.
         Mounting Huge Pages File System...
[  OK  ] Started Dispatch Password …ts to Console Directory Watch.
[  OK  ] Reached target Local Encrypted Volumes.
[  OK  ] Reached target Paths.
[  OK  ] Listening on fsck to fsckd communication Socket.
[  OK  ] Reached target Slices.
[  OK  ] Reached target Remote File Systems.
         Mounting Kernel Debug File System...
[  OK  ] Listening on Journal Audit Socket.
         Starting Journal Service...
         Starting Remount Root and Kernel File Systems...
[  OK  ] Listening on udev Kernel Socket.
         Starting udev Coldplug all Devices...
[  OK  ] Started Load Kernel Modules.
[  OK  ] Started Create list of req… nodes for the current kernel.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Mounted Kernel Debug File System.
[   10.505979] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
         Starting Apply Kernel Variables...
[  OK  ] Started Remount Root and Kernel File Systems.
         Starting Load/Save Random Seed...
         Starting Create System Users...
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Journal Service.
         Starting Flush Journal to Persistent Storage...
[   10.964884] systemd-journald[196]: Received request to flush runtime journal from PID 1
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started udev Coldplug all Devices.
         Starting Helper to synchronize boot up for ifupdown...
[  OK  ] Started Create System Users.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Create Static Device Nodes in /dev.
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
         Starting Create Volatile Files and Directories...
         Starting udev Kernel Device Manager...
[  OK  ] Started Create Volatile Files and Directories.
         Starting Network Time Synchronization...
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Started Daily apt download activities.
[  OK  ] Started Daily apt upgrade and clean activities.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
[  OK  ] Started Regular background program processing daemon.
         Starting Login Service...
         Starting System Logging Service...
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Reached target Timers.
[  OK  ] Started System Logging Service.
[   13.513729] sun4i-ss 1c15000.crypto-engine: Die ID 0
[   13.561656] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  OK  ] Started Login Service.
[   13.724210] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[   13.869975] Registered IR keymap rc-empty
[   13.907617] rc rc0: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0
[   13.990851] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter
[   13.991523] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   14.057058] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input1
[   14.087264] input: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0/input0
[   14.108461] debugfs: Directory '1c22c00.codec' with parent 'sun4i-codec' already present!
[   14.179952] axp20x-adc axp20x-adc: DMA mask not set
[   14.189765] sunxi-ir 1c21800.ir: initialized sunXi IR driver
[   14.200406] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[   14.205827] axp20x-ac-power-supply axp20x-ac-power-supply: DMA mask not set
[   14.236577] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
[   14.276932] lima 1c40000.gpu: IRQ ppmmu2 not found
[   14.281952] lima 1c40000.gpu: IRQ ppmmu3 not found
[   14.327790] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[   14.340619] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
[   14.356492] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
[   14.381629] sun4i-codec 1c22c00.codec: ASoC: no DMI vendor name!
[   14.406431] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
[   14.420280] ehci-platform 1c14000.usb: EHCI Host Controller
[   14.435994] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   14.465298] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
[   14.498029] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[   14.535707] lima 1c40000.gpu: IRQ pp2 not found
[   14.540488] lima 1c40000.gpu: IRQ pp3 not found
[   14.545268] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
[  OK  ] Found device /dev/ttyS0.
[   14.560648] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[   14.617700] ehci-platform 1c14000.usb: irq 33, io mem 0x01c14000
[   14.618032] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[   14.689576] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[   14.725740] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1
[   14.782488] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[   14.790980] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   14.798484] usb usb1: Product: EHCI Host Controller
[   14.803448] usb usb1: Manufacturer: Linux 5.5.0-0.bpo.2-armmp-lpae ehci_hcd
[   14.810482] usb usb1: SerialNumber: 1c14000.usb
[   14.814791] lima 1c40000.gpu: bus rate = 300000000
[   14.820058] lima 1c40000.gpu: mod rate = 384000000
[   14.853938] usbcore: registered new interface driver brcmfmac
[   14.865524] [drm] Initialized lima 1.0.0 20190217 for 1c40000.gpu on minor 0
[   14.869519] sun4i-drm display-engine: bound 1e00000.display-frontend (ops sun4i_frontend_driver_exit [sun4i_frontend])
[   14.984664] sun4i-drm display-engine: bound 1e20000.display-frontend (ops sun4i_frontend_driver_exit [sun4i_frontend])
[   15.058134] sun4i-drm display-engine: bound 1e60000.display-backend (ops sun4i_backend_ops [sun4i_backend])
[   15.089976] hub 1-0:1.0: USB hub found
[   15.121684] hub 1-0:1.0: 1 port detected
[   15.124620] sun4i-drm display-engine: bound 1e40000.display-backend (ops sun4i_backend_ops [sun4i_backend])
[   15.152319] ehci-platform 1c1c000.usb: EHCI Host Controller
[   15.184432] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[   15.197257] sun4i-drm display-engine: No panel or bridge found... RGB output disabled
[   15.205299] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops sun4i_tcon_platform_driver_exit [sun4i_tcon])
[   15.256297] ehci-platform 1c1c000.usb: irq 38, io mem 0x01c1c000
[   15.267118] brcmfmac mmc1:0001:1: firmware: direct-loading firmware brcm/brcmfmac43362-sdio.bin
[   15.296818] brcmfmac mmc1:0001:1: firmware: failed to load brcm/brcmfmac43362-sdio.cubietech,cubietruck.txt (-2)
[   15.307189] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[   15.314410] sun4i-drm display-engine: No panel or bridge found... RGB output disabled
[   15.316731] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43362-sdio.cubietech,cubietruck.txt failed with error -2
[   15.324508] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops sun4i_tcon_platform_driver_exit [sun4i_tcon])
[   15.365529] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[   15.381682] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[   15.390108] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   15.397406] usb usb2: Product: EHCI Host Controller
[   15.402364] usb usb2: Manufacturer: Linux 5.5.0-0.bpo.2-armmp-lpae ehci_hcd
[   15.409422] usb usb2: SerialNumber: 1c1c000.usb
[   15.484714] sun4i-drm display-engine: bound 1c16000.hdmi (ops sun4i_hdmi_driver_exit [sun4i_drm_hdmi])
[   15.528528] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.535315] [drm] No driver support for vblank timestamp query.
[   15.538616] hub 2-0:1.0: USB hub found
[   15.548932] brcmfmac mmc1:0001:1: firmware: direct-loading firmware brcm/brcmfmac43362-sdio.txt
[   15.588999] hub 2-0:1.0: 1 port detected
[   15.609790] fb0: switching to sun4i-drm-fb from simple
[   15.629143] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator
[   15.640971] Console: switching to colour dummy device 80x30
[   15.674788] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1
[   15.691635] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[   15.723997] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 3
[   16.250299] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[   16.258704] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   16.266018] usb usb3: Product: MUSB HDRC host driver
[   16.271071] usb usb3: Manufacturer: Linux 5.5.0-0.bpo.2-armmp-lpae musb-hcd
[   16.278138] usb usb3: SerialNumber: musb-hdrc.1.auto
[   16.285298] hub 3-0:1.0: USB hub found
[   16.289315] hub 3-0:1.0: 1 port detected
[   16.297791] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[   16.304646] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 4
[   16.312965] [drm] Cannot find any crtc or sizes
[   16.320008] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1
[   16.333741] brcmfmac mmc1:0001:1: firmware: failed to load brcm/brcmfmac43362-sdio.clm_blob (-2)
[   16.348343] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[   16.368679] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43362/1 wl0: May 16 2018 23:42:49 version 5.90.244 FWID 01-0
[   16.380418] ohci-platform 1c14400.usb: irq 34, io mem 0x01c14400
[   16.450542] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05
[   16.459100] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   16.466481] usb usb4: Product: Generic Platform OHCI controller
[   16.472579] usb usb4: Manufacturer: Linux 5.5.0-0.bpo.2-armmp-lpae ohci_hcd
[   16.479731] usb usb4: SerialNumber: 1c14400.usb
[   16.529154] hub 4-0:1.0: USB hub found
[   16.541633] hub 4-0:1.0: 1 port detected
[   16.561884] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[   16.581795] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 5
[   16.609849] ohci-platform 1c1c400.usb: irq 39, io mem 0x01c1c400
[   16.678499] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05
[   16.686986] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   16.694366] usb usb5: Product: Generic Platform OHCI controller
[   16.700434] usb usb5: Manufacturer: Linux 5.5.0-0.bpo.2-armmp-lpae ohci_hcd
[   16.707542] usb usb5: SerialNumber: 1c1c400.usb
[   16.741213] hub 5-0:1.0: USB hub found
[   16.745205] hub 5-0:1.0: 1 port detected
[   16.763738] asoc-simple-card sound: dit-hifi <-> 1c21000.spdif mapping ok
[   16.776858] asoc-simple-card sound: ASoC: no DMI vendor name!
[  OK  ] Started Helper to synchronize boot up for ifupdown.
[  OK  ] Reached target Sound Card.
[  OK  ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
         Starting Raise network interfaces...
         Starting Load/Save RF Kill Switch Status...
[  OK  ] Started Load/Save RF Kill Switch Status.
[   18.953536] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet]
[   18.964887] sun7i-dwmac 1c50000.ethernet eth0: No Safety Features support found
[   18.972355] sun7i-dwmac 1c50000.ethernet eth0: RX IPC Checksum Offload disabled
[   18.979819] sun7i-dwmac 1c50000.ethernet eth0: No MAC Management Counters available
[   18.987549] sun7i-dwmac 1c50000.ethernet eth0: PTP not supported by HW
[   18.994146] sun7i-dwmac 1c50000.ethernet eth0: configuring for phy/rgmii link mode
[   23.047174] random: crng init done
[   23.050685] random: 7 urandom warning(s) missed due to ratelimiting
[   23.082746] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   23.091656] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[*     ] A start job is running for Raise network interfaces (13s / 5min 8s)
[**    ] A start job is running for Raise network interfaces (14s / 5min 8s)
[***   ] A start job is running for Raise network interfaces (14s / 5min 8s)
[ ***  ] A start job is running for Raise network interfaces (15s / 5min 8s)
[  OK  ] Started Raise network interfaces.
[  OK  ] Reached target Network.
         Starting Permit User Sessions...
         Starting OpenBSD Secure Shell server...
[  OK  ] Started Permit User Sessions.
[  OK  ] Started Serial Getty on ttyS0.
[  OK  ] Started Getty on tty1.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started OpenBSD Secure Shell server.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Started Update UTMP about System Runlevel Changes.
[   26.836325] [drm] Cannot find any crtc or sizes

Debian GNU/Linux 10 Cubietruck ttyS0

Cubietruck login: root
Linux Cubietruck 5.5.0-0.bpo.2-armmp-lpae #1 SMP Debian 5.5.17-1~bpo10+1 (2020-04-23) armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@Cubietruck:~# [   35.817732] vcc3v0: disabling
[   35.820816] vcc5v0: disabling
[   35.824996] usb0-vbus: disabling

root@Cubietruck:~# uname -a
Linux Cubietruck 5.5.0-0.bpo.2-armmp-lpae #1 SMP Debian 5.5.17-1~bpo10+1 (2020-04-23) armv7l GNU/Linux
root@Cubietruck:~#

Il ne me reste qu'a installer les machines virtuelles et à effectuer les tests des applicatifs et les tests d'endurance ....
Je communiquerais ultérieurement les résultats

:D
Cordialement

jeanmarc
Messages : 40
Enregistré le : dim. mars 22, 2020 5:28 pm
Localisation : Essonne

Re: [cubietruck] [debian] 5.5.0-0.bpo.2-armmp-lpae KO

Message par jeanmarc »

Bonjour,

Comme convenu, la suite de la saga de la Cubietruck ...
Depuis quelques jours, Debian à mis à jour ses serveurs pour prise en compte du noyau 5.6.
Bien entendu, la Cubietruck qui est configurée 100% Debian grâce à la fabrication initiale du rootfs du projet VMDB2 en bénéficie simplement par update+upgrade.
J'ai par ailleurs installé des services réseau et des applicatifs sur cette Cubietruck.

Dans mon usage, chaque service est hébergé dans un container LXC avec ses propres restrictions spécifiques (accès au réseau, aux capabilities, au File system et à la RAM)

Les choix effectués ici dépendent bien entendu du Système d'information envisagé...

Dans mon cas, cet équipement est utilisé pour héberger les services suivants, (le nom du service est dans le nom du VE (Virtual Element) ...)

Code : Tout sélectionner

ansible@srv-cubietruck-120:~$ sudo lxc-ls -f
NAME                  STATE   AUTOSTART GROUPS                IPV4          IPV6 UNPRIVILEGED 
srv-authenticator-120 RUNNING 1         grp_lxc_start_on_boot 192.168.63.91 -    false        
srv-backup-120        RUNNING 1         grp_lxc_start_on_boot 192.168.63.86 -    false        
srv-dhcp-120          RUNNING 1         grp_lxc_start_on_boot 192.168.63.82 -    false        
srv-dns-120           RUNNING 1         grp_lxc_start_on_boot 192.168.63.83 -    false        
srv-firewall-120      RUNNING 1         grp_lxc_start_on_boot 192.168.63.90 -    false        
srv-jeedom-120        RUNNING 1         grp_lxc_start_on_boot 192.168.63.93 -    false        
srv-mmonit-120        RUNNING 1         grp_lxc_start_on_boot 192.168.63.87 -    false        
srv-nfs-120           RUNNING 1         grp_lxc_start_on_boot 192.168.63.88 -    false        
srv-ntp-120           RUNNING 1         grp_lxc_start_on_boot 192.168.63.84 -    false        
srv-openvpn-120       RUNNING 1         grp_lxc_start_on_boot 192.168.63.89 -    false        
srv-syslog-120        RUNNING 1         grp_lxc_start_on_boot 192.168.63.85 -    false        
vm-ssh-120            RUNNING 1         grp_lxc_start_on_boot 192.168.63.92 -    false       

Par ailleurs, l'update/upgrade s'est bien passé puisque ...

Code : Tout sélectionner

ansible@srv-cubietruck-120:~$ uname -a
Linux srv-cubietruck-120 5.6.0-0.bpo.2-armmp-lpae #1 SMP Debian 5.6.14-2~bpo10+1 (2020-06-09) armv7l GNU/Linux

Donc à priori tout est OK, ce qui résous les problèmes présentés initialement...
:D
Cordialement

Répondre