[nanopir1] [FriendlyElec] u-boot 2017.11 Ubuntu 16.04.2 LTS kernel Linux 4.14.111

Discussions sur les cartes Nanopi R1, Neo, K1, etc.)
https://www.friendlyarm.com/
Répondre
jeanmarc
Messages : 43
Enregistré le : dim. mars 22, 2020 5:28 pm
Localisation : Essonne

[nanopir1] [FriendlyElec] u-boot 2017.11 Ubuntu 16.04.2 LTS kernel Linux 4.14.111

Message par jeanmarc »

Bonjour,
Ci-joint les logs de boot (u-boot+kernel) de l'image du fournisseur de la plate-forme avec l'hypothèse ici que l'image est installée sur une SDcard.

Pour rappel, le Soc est un Allwinner H3 4 cores
Les spécifications originales sont ici
https://www.friendlyarm.com/index.php? ... ct_id=248

Code : Tout sélectionner


U-Boot SPL 2017.11 (Dec 19 2019 - 16:43:16)
DRAM: 1024 MiB(408MHz)
CPU Freq: 408MHz
memory test: 1
Pattern 55aa  Writing...Reading...OK
Trying to boot from MMC1
Boot device: sd


U-Boot 2017.11 (Dec 19 2019 - 16:43:16 +0800) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: FriendlyElec NanoPi H3
DRAM:  1 GiB
CPU Freq: 1008MHz
MMC:   SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
BOARD: nanopi-r1
starting USB...
No controllers found
Hit any key to stop autoboot:  2  1  0 
reading boot.scr
1478 bytes read in 19 ms (75.2 KiB/s)
## Executing script at 43100000
running boot.scr
reading uEnv.txt
968 bytes read in 18 ms (51.8 KiB/s)
reading zImage
5901592 bytes read in 293 ms (19.2 MiB/s)
reading rootfs.cpio.gz
5880768 bytes read in 287 ms (19.5 MiB/s)
reading sun8i-h3-nanopi-r1.dtb
36147 bytes read in 26 ms (1.3 MiB/s)
overlays is empty
reading overlays/sun8i-h3-fixup.scr
4109 bytes read in 37 ms (108.4 KiB/s)
## Executing script at 44500000
## Flattened Device Tree blob at 48000000
   Booting using the fdt blob at 0x48000000
   Loading Ramdisk to 49a64000, end 49fffbc0 ... OK
   reserving fdt memory region: addr=48000000 size=6f000
   Loading Device Tree to 499f2000, end 49a63fff ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.111 (root@ubuntu) (gcc version 4.9.3 (ctng-1.21.0-229g-FA)) #1 SMP Thu Dec 19 15:23:22 CST 2019
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=30c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: FriendlyElec NanoPi-R1
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Reserved memory: created CMA memory pool at 0x000000007bc00000, size 64 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] percpu: Embedded 17 pages/cpu @ef69b000 s37120 r8192 d24320 u69632
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 260416
[    0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait fsck.repair=yes panic=10 fbcon=map:0  data=/dev/mmcblk0p3 snd-soc-core.pmdown_time=3600000
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 949260K/1048576K available (10240K kernel code, 391K rwdata, 2080K rodata, 2048K init, 303K bss, 33780K reserved, 65536K cma-reserved, 196600K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0c00000   (12256 kB)
[    0.000000]       .init : 0xc1000000 - 0xc1200000   (2048 kB)
[    0.000000]       .data : 0xc1200000 - 0xc1261f00   ( 392 kB)
[    0.000000]        .bss : 0xc126a884 - 0xc12b6850   ( 304 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000018] Switching to timer-based delay loop, resolution 41ns
[    0.000218] Console: colour dummy device 80x30
[    0.000256] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
[    0.000271] pid_max: default: 32768 minimum: 301
[    0.000438] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000453] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001152] CPU: Testing write buffer coherency: ok
[    0.001591] CPU0: update cpu_capacity 1024
[    0.001603] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001964] Setting up static identity map for 0x40200000 - 0x40200060
[    0.002087] Hierarchical SRCU implementation.
[    0.002641] smp: Bringing up secondary CPUs ...
[    0.013426] CPU1: update cpu_capacity 1024
[    0.013433] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.024317] CPU2: update cpu_capacity 1024
[    0.024324] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.035127] CPU3: update cpu_capacity 1024
[    0.035132] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.035221] smp: Brought up 1 node, 4 CPUs
[    0.035250] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.035256] CPU: All CPU(s) started in HYP mode.
[    0.035262] CPU: Virtualization extensions available.
[    0.036021] devtmpfs: initialized
[    0.042851] random: get_random_u32 called from bucket_table_alloc+0xf0/0x240 with crng_init=0
[    0.043458] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.043725] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
[    0.043748] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.046389] xor: measuring software checksum speed
[    0.094907]    arm4regs  :  1372.000 MB/sec
[    0.144963]    8regs     :   769.600 MB/sec
[    0.195019]    32regs    :   850.400 MB/sec
[    0.245077]    neon      :  1283.200 MB/sec
[    0.245084] xor: using function: arm4regs (1372.000 MB/sec)
[    0.245102] pinctrl core: initialized pinctrl subsystem
[    0.246049] NET: Registered protocol family 16
[    0.247361] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.248284] cpuidle: using governor ladder
[    0.248444] cpuidle: using governor menu
[    0.248849] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.248859] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.268399] SCSI subsystem initialized
[    0.268822] usbcore: registered new interface driver usbfs
[    0.268883] usbcore: registered new interface driver hub
[    0.268966] usbcore: registered new device driver usb
[    0.269151] media: Linux media interface: v0.10
[    0.269187] Linux video capture interface: v2.00
[    0.269282] pps_core: LinuxPPS API ver. 1 registered
[    0.269291] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.269309] PTP clock support registered
[    0.269611] Advanced Linux Sound Architecture Driver Initialized.
[    0.271162] clocksource: Switched to clocksource arch_sys_counter
[    0.271383] VFS: Disk quotas dquot_6.6.0
[    0.271453] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.271600] FS-Cache: Loaded
[    0.278564] NET: Registered protocol family 2
[    0.279216] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.279306] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.279422] TCP: Hash tables configured (established 8192 bind 8192)
[    0.279532] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.279606] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.279833] NET: Registered protocol family 1
[    0.280289] RPC: Registered named UNIX socket transport module.
[    0.280301] RPC: Registered udp transport module.
[    0.280307] RPC: Registered tcp transport module.
[    0.280312] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.280526] Unpacking initramfs...
[    0.577987] Freeing initrd memory: 5744K
[    0.578408] kvm [1]: 8-bit VMID
[    0.579064] kvm [1]: vgic interrupt IRQ16
[    0.579163] kvm [1]: Hyp mode initialized successfully
[    0.582043] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.586618] zbud: loaded
[    0.588196] FS-Cache: Netfs 'nfs' registered for caching
[    0.588698] NFS: Registering the id_resolver key type
[    0.588735] Key type id_resolver registered
[    0.588741] Key type id_legacy registered
[    0.588756] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.588772] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.589648] fuse init (API version 7.26)
[    0.595041] async_tx: api initialized (async)
[    0.595121] bounce: pool size: 64 pages
[    0.595215] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.595389] io scheduler noop registered (default)
[    0.595399] io scheduler deadline registered
[    0.595574] io scheduler cfq registered
[    0.595583] io scheduler mq-deadline registered
[    0.595713] io scheduler bfq registered
[    0.596455] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO, pinctrl may not init
[    0.600207] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.601758] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[    0.607298] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.609122] console [ttyS0] disabled
[    0.629304] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 46, base_baud = 1500000) is a U6_16550A
[    1.394658] console [ttyS0] enabled
[    1.420907] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 47, base_baud = 1500000) is a U6_16550A
[    1.452505] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 48, base_baud = 1500000) is a U6_16550A
[    1.482064] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 49, base_baud = 1500000) is a U6_16550A
[    1.493309] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.499944] [drm] No driver support for vblank timestamp query.
[    1.515251] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc0c51b68)
[    1.522369] sun4i-drm display-engine: No panel or bridge found... RGB output disabled
[    1.530234] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc0c5086c)
[    1.661254] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
[    1.671124] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
[    1.678842] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xc0c51ee8)
[    1.685699] [drm] Cannot find any crtc or sizes - going 1920x1080
[    1.729679] Console: switching to colour frame buffer device 240x67
[    1.760535] sun4i-drm display-engine: fb0:  frame buffer device
[    1.766891] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
[    1.783076] loop: module loaded
[    1.801377] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[    1.807737] osst :I: Tape driver with OnStream support version 0.99.4
[    1.807737] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[    1.821067] SCSI Media Changer driver v0.25 
[    1.827359] libphy: Fixed MDIO Bus: probed
[    1.831500] tun: Universal TUN/TAP device driver, 1.6
[    1.836719] CAN device driver interface
[    1.841324] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
[    1.847522] PPP generic driver version 2.4.2
[    1.851981] PPP BSD Compression module registered
[    1.856702] PPP Deflate Compression module registered
[    1.861782] PPP MPPE Compression module registered
[    1.866578] NET: Registered protocol family 24
[    1.871114] usbcore: registered new interface driver qmi_wwan
[    1.876901] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.883442] ehci-platform: EHCI generic platform driver
[    1.888887] ehci-platform 1c1a000.usb: EHCI Host Controller
[    1.894498] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
[    1.902645] ehci-platform 1c1a000.usb: irq 30, io mem 0x01c1a000
[    1.921186] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[    1.927480] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.934284] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.941509] usb usb1: Product: EHCI Host Controller
[    1.946392] usb usb1: Manufacturer: Linux 4.14.111 ehci_hcd
[    1.951968] usb usb1: SerialNumber: 1c1a000.usb
[    1.957018] hub 1-0:1.0: USB hub found
[    1.960796] hub 1-0:1.0: 1 port detected
[    1.965436] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.971655] ohci-platform: OHCI generic platform driver
[    1.977088] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[    1.983736] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
[    1.991663] ohci-platform 1c1a400.usb: irq 31, io mem 0x01c1a400
[    2.060343] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.067153] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.074380] usb usb2: Product: Generic Platform OHCI controller
[    2.080304] usb usb2: Manufacturer: Linux 4.14.111 ohci_hcd
[    2.085880] usb usb2: SerialNumber: 1c1a400.usb
[    2.093248] hub 2-0:1.0: USB hub found
[    2.097042] hub 2-0:1.0: 1 port detected
[    2.101688] usbcore: registered new interface driver cdc_acm
[    2.107362] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.115453] usbcore: registered new interface driver usblp
[    2.120990] usbcore: registered new interface driver cdc_wdm
[    2.126700] usbcore: registered new interface driver uas
[    2.132092] usbcore: registered new interface driver usb-storage
[    2.138187] usbcore: registered new interface driver usbserial
[    2.144059] usbcore: registered new interface driver usbserial_generic
[    2.150617] usbserial: USB Serial support registered for generic
[    2.156661] usbcore: registered new interface driver option
[    2.162261] usbserial: USB Serial support registered for GSM modem (1-port)
[    2.169369] usbcore: registered new interface driver qcserial
[    2.175153] usbserial: USB Serial support registered for Qualcomm USB modem
[    2.182924] mousedev: PS/2 mouse device common for all mice
[    2.189006] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
[    2.195806] sun6i-rtc 1f00000.rtc: RTC enabled
[    2.200329] i2c /dev entries driver
[    2.205707] lirc_dev: IR Remote Control driver registered, major 244
[    2.212089] IR NEC protocol handler initialized
[    2.216629] IR RC5(x/sz) protocol handler initialized
[    2.221683] IR RC6 protocol handler initialized
[    2.226217] IR JVC protocol handler initialized
[    2.230739] IR Sony protocol handler initialized
[    2.235358] IR SANYO protocol handler initialized
[    2.240064] IR Sharp protocol handler initialized
[    2.244770] IR MCE Keyboard/mouse protocol handler initialized
[    2.250602] IR LIRC bridge handler initialized
[    2.255048] IR XMP protocol handler initialized
[    2.260427] thermal thermal_zone0: failed to read out thermal zone (-16)
[    2.267646] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    2.275951] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    2.326223] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
[    2.333986] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
[    2.382269] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.395883] mmc0: new high speed SDHC card at address aaaa
[    2.401814] mmcblk0: mmc0:aaaa SC16G 14.8 GiB 
[    2.411546]  mmcblk0: p1 p2 p3
[    2.586193] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB
[    2.608903] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.615914] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.622909] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.631102] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.631201] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
[    2.639867] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
[    2.649097] ledtrig-cpu: registered to indicate activity on CPUs
[    2.655394] hidraw: raw HID events driver (C) Jiri Kosina
[    2.660960] usbcore: registered new interface driver usbhid
[    2.666543] usbhid: USB HID core driver
[    2.683700] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
[    2.693600] random: fast init done
[    2.693721] Initializing XFRM netlink socket
[    2.701915] NET: Registered protocol family 10
[    2.724203] Segment Routing with IPv6
[    2.727992] NET: Registered protocol family 17
[    2.732474] NET: Registered protocol family 15
[    2.736923] can: controller area network core (rev 20170425 abi 9)
[    2.743222] NET: Registered protocol family 29
[    2.743501] mmc2: new high speed SDIO card at address 0001
[    2.747699] can: raw protocol (rev 20170425)
[    2.757439] can: broadcast manager protocol (rev 20170425 t)
[    2.763112] can: netlink gateway (rev 20170425) max_hops=1
[    2.769426] rfkill_gpio rfkill_bt: sunxi-bt device registered.
[    2.775439] Key type dns_resolver registered
[    2.780083] Registering SWP/SWPB emulation handler
[    2.786327] registered taskstats version 1
[    2.798207] mmc1: new DDR MMC card at address 0001
[    2.798858] Key type encrypted registered
[    2.803540] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB 
[    2.811986] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
[    2.812666] vcc1v2: supplied by vcc5v0
[    2.818227] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
[    2.822115] vcc-dram: supplied by vcc5v0
[    2.831707]  mmcblk1: p1 p2 p3
[    2.831950] vdd-cpux-en: supplied by vcc5v0
[    2.841137] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
[    2.847077] dwmac-sun8i 1c30000.ethernet: Will use external PHY
[    2.961351] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
[    2.967025] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
[    2.974253] dwmac-sun8i 1c30000.ethernet: Normal descriptors
[    2.979917] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
[    2.987140] dwmac-sun8i 1c30000.ethernet: COE Type 2
[    2.992110] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
[    2.999477] libphy: stmmac: probed
[    3.008672] ehci-platform 1c1b000.usb: EHCI Host Controller
[    3.014305] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3
[    3.022543] ehci-platform 1c1b000.usb: irq 32, io mem 0x01c1b000
[    3.041179] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[    3.047489] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    3.054289] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.061512] usb usb3: Product: EHCI Host Controller
[    3.066393] usb usb3: Manufacturer: Linux 4.14.111 ehci_hcd
[    3.071966] usb usb3: SerialNumber: 1c1b000.usb
[    3.077055] hub 3-0:1.0: USB hub found
[    3.080837] hub 3-0:1.0: 1 port detected
[    3.085483] ehci-platform 1c1c000.usb: EHCI Host Controller
[    3.091096] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 4
[    3.099166] ehci-platform 1c1c000.usb: irq 34, io mem 0x01c1c000
[    3.116178] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[    3.122455] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    3.129256] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.136479] usb usb4: Product: EHCI Host Controller
[    3.141362] usb usb4: Manufacturer: Linux 4.14.111 ehci_hcd
[    3.146937] usb usb4: SerialNumber: 1c1c000.usb
[    3.151952] hub 4-0:1.0: USB hub found
[    3.155726] hub 4-0:1.0: 1 port detected
[    3.160292] ehci-platform 1c1d000.usb: EHCI Host Controller
[    3.165896] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 5
[    3.173887] ehci-platform 1c1d000.usb: irq 36, io mem 0x01c1d000
[    3.191170] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
[    3.197407] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    3.204203] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.211428] usb usb5: Product: EHCI Host Controller
[    3.216311] usb usb5: Manufacturer: Linux 4.14.111 ehci_hcd
[    3.221886] usb usb5: SerialNumber: 1c1d000.usb
[    3.226881] hub 5-0:1.0: USB hub found
[    3.230655] hub 5-0:1.0: 1 port detected
[    3.235188] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[    3.241845] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 6
[    3.249816] ohci-platform 1c1b400.usb: irq 33, io mem 0x01c1b400
[    3.315303] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    3.322103] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.329327] usb usb6: Product: Generic Platform OHCI controller
[    3.335250] usb usb6: Manufacturer: Linux 4.14.111 ohci_hcd
[    3.340827] usb usb6: SerialNumber: 1c1b400.usb
[    3.345890] hub 6-0:1.0: USB hub found
[    3.349687] hub 6-0:1.0: 1 port detected
[    3.354277] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[    3.360929] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 7
[    3.369039] ohci-platform 1c1c400.usb: irq 35, io mem 0x01c1c400
[    3.426188] usb 3-1: new high-speed USB device number 2 using ehci-platform
[    3.437368] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    3.444172] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.451404] usb usb7: Product: Generic Platform OHCI controller
[    3.457334] usb usb7: Manufacturer: Linux 4.14.111 ohci_hcd
[    3.462914] usb usb7: SerialNumber: 1c1c400.usb
[    3.467930] hub 7-0:1.0: USB hub found
[    3.471726] hub 7-0:1.0: 1 port detected
[    3.476295] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
[    3.482942] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 8
[    3.490907] ohci-platform 1c1d400.usb: irq 37, io mem 0x01c1d400
[    3.560313] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    3.567118] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.574345] usb usb8: Product: Generic Platform OHCI controller
[    3.580273] usb usb8: Manufacturer: Linux 4.14.111 ohci_hcd
[    3.585851] usb usb8: SerialNumber: 1c1d400.usb
[    3.590964] hub 8-0:1.0: USB hub found
[    3.594763] hub 8-0:1.0: 1 port detected
[    3.599386] usb_phy_generic usb_phy_generic.3.auto: usb_phy_generic.3.auto supply vcc not found, using dummy regulator
[    3.610484] musb-hdrc musb-hdrc.4.auto: MUSB HDRC host driver
[    3.616298] musb-hdrc musb-hdrc.4.auto: new USB bus registered, assigned bus number 9
[    3.624388] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[    3.631216] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.638448] usb usb9: Product: MUSB HDRC host driver
[    3.643424] usb usb9: Manufacturer: Linux 4.14.111 musb-hcd
[    3.649005] usb usb9: SerialNumber: musb-hdrc.4.auto
[    3.654585] hub 9-0:1.0: USB hub found
[    3.658422] hub 9-0:1.0: 1 port detected
[    3.662616] usb 3-1: New USB device found, idVendor=0bda, idProduct=8152
[    3.669333] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.676486] usb 3-1: Product: USB 10/100 LAN
[    3.680758] usb 3-1: Manufacturer: Realtek
[    3.684870] usb 3-1: SerialNumber: 000000000000
[    3.692575] asoc-simple-card soc:sound: i2s-hifi <-> 1c22800.i2s mapping ok
[    3.702471] input: r_gpio_keys as /devices/platform/r_gpio_keys/input/input0
[    3.710214] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:09 UTC (9)
[    3.718600] vcc3v0: disabling
[    3.721604] vcc5v0: disabling
[    3.724569] usb0-vbus: disabling
[    3.727807] ALSA device list:
[    3.730771]   #0: Dummy 1
[    3.733399]   #1: Loopback 1
[    3.736282]   #2: H3 Audio Codec
[    3.739504]   #3: allwinner,hdmi
[    3.745131] Freeing unused kernel memory: 2048K
Loading, please wait...
starting version 237
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
[    4.513925] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Begin: Will now check userdata file system ... fsck from util-linux 2.31.1
[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p3] fsck.ext4 -y -C0 /dev/mmcblk0p3 
e2fsck 1.44.1 (24-Mar-2018)
userdata: clean, 11/7232 files, 1490/28928 blocks
done.
[    4.646912] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
Begin: Resizing ext4 file system on /dev/mmcblk0p3 ... Model: SD SC16G (sd/mmc)
Disk /dev/mmcblk0: 100%
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags: 

Number  Start  End    Size   Type     File system  Flags
 1      0.16%  0.42%  0.26%  primary  fat16
 2      0.42%  14.7%  14.3%  primary  ext4
 3      14.7%  100%   85.3%  primary  ext4

resize2fs 1.44.1 (24-Mar-2018)
Resizing the filesystem on /dev/mmcblk0p3 to 3315840 (4k) blocks.
The filesystem on /dev/mmcblk0p3 is now 3315840 (4k) blocks long.

done.
[    7.796668] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[    8.111492] systemd[1]: System time before build time, advancing clock.
[    8.188382] random: systemd: uninitialized urandom read (16 bytes read)
[    8.200159] random: systemd: uninitialized urandom read (16 bytes read)
[    8.210745] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    8.229355] systemd[1]: Detected architecture arm.

Welcome to Ubuntu 16.04.2 LTS!

[    8.264824] systemd[1]: Set hostname to <FriendlyELEC>.
[    8.308415] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[    8.523680] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[    8.546915] systemd[1]: Created slice System Slice.
[  OK  ] Created slice System Slice.
[    8.566662] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[    8.586729] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[    8.606505] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[    8.631275] systemd[1]: Reached target Paths.
[  OK  ] Reached target Paths.
[    8.651386] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Reached target Slices.
[  OK  ] Reached target Encrypted Volumes.
[  OK  ] Listening on Journal Socket.
         Starting Load Kernel Modules...
         Starting Create list of required st... nodes for the current kernel...
[    8.753623] Mass Storage Function, version: 2009/09/11
[    8.758872] LUN: removable file: (no medium)
         Mounting POSIX Message Queue File System...[    8.763549] LUN: file: /dev/mmcblk0p1

[    8.771756] Number of LUNs=1
[    8.774940] g_mass_storage gadget: Mass Storage Gadget, version: 2009/09/11
[    8.782000] g_mass_storage gadget: userspace failed to provide iSerialNumber
[    8.789063] g_mass_storage gadget: g_mass_storage ready
         Mounting Debug File System...
[    8.914899] 8821cu: loading out-of-tree module taints kernel.
[  OK  ] Listening on Journal Socket (/dev/log).
[    8.936944] usbcore: registered new interface driver rtl8821cu
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
         Starting Set console keymap...
         Starting Remount Root and Kernel File Systems...
[  OK  ] Listening on udev Control Socket.
         Starting Journal Service...
[    9.086402] usbcore: registered new interface driver rtl88xxau
[  OK  ] Reached target Swap.
[  OK  ] Reached target Remote File Systems (Pre).
[  OK  ] Reached target Remote File Systems.
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted POSIX Message Queue File System.
[    9.174773] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[  OK  ] Started Create list of required sta...ce nodes for the current kernel.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Started Load Kernel Modules.
[  OK  ] Started Set console keymap.
         Mounting FUSE Control File System...
         Starting Apply Kernel Variables...
[    9.392246] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[    9.402725] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
         [    9.414563] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct  8 2016 15:31:47 version 7.46.57.4.ap.r4 (A1 Station/P2P) FWID 01-3621395e es6.c5.n4.a3
Mounting Configuration File System...
         Starting udev Coldplug all Devices...
         Starting Load/Save Random Seed...
         Starting Create Static Device Nodes in /dev...
[  OK  ] Mounted Configuration File System.
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Started Journal Service.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Reached target Sound Card.
[  OK  ] Found device /dev/mmcblk0p1.
[  OK  ] Found device /dev/ttyS0.
         Mounting /boot...
[  OK  ] Mounted /boot.
[  OK  ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[  OK  ] Reached target Local File Systems.
         Starting Create Volatile Files and Directories...
         Starting Raise network interfaces...
         Starting Set console font and keymap...
[   11.285429] r8152 3-1:1.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00
[  OK  ] Started Create Volatile Files and Directories.
         Starting Load/Save RF Kill Switch Status...
[  OK  ] Reached target System Time Synchronized.
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started Load/Save RF Kill Switch Status.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Basic System.
         Starting LSB: select system audio output at first boot...
         Starting brcm_patchram_plus...
         Starting LSB: sync_ntp_rtc...
         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
         Starting Restore /etc/resolv.conf i...re the ppp link was shut down...
[  OK  ] Started D-Bus System Message Bus.
         Starting Modem Manager...
[  OK  ] Started Regular background program processing daemon.
         Starting LSB: add swap at first boot...
         Starting Save/Restore Sound Card State...
         Starting Network Manager...
         Starting Permit User Sessions...
         Starting Login Service...
[  OK  ] Started Daily apt activities.
[  OK  ] Reached target Timers.
[  OK  ] Started Set console font and keymap.
[  OK  ] Started LSB: select system audio output at first boot.
[  OK  ] Started LSB: sync_ntp_rtc.
[  OK  ] Started Restore /etc/resolv.conf if...fore the ppp link was shut down.
[  OK  ] Started Permit User Sessions.
[  OK  ] Started Save/Restore Sound Card State.
[  OK  ] Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
[  OK  ] Started Login Service.
[  OK  ] Started Raise network interfaces.
         Starting Authenticate and Authorize Users to Run Privileged Tasks...
         Starting Set console scheme...
[  OK  ] Created slice system-getty.slice.
[  OK  ] Started Set console scheme.
[  OK  ] Started LSB: add swap at first boot.
[  OK  ] Started Authenticate and Authorize Users to Run Privileged Tasks.
[  OK  ] Started Network Manager.
[  OK  ] Reached target Network.
         Starting OpenBSD Secure Shell server...
         Starting Network Manager Wait Online...
[  OK  ] Started Modem Manager.
         Starting Network Manager Script Dispatcher Service...
[  OK  ] Started Network Manager Script Dispatcher Service.
         Starting Hostname Service...
[  OK  ] Started OpenBSD Secure Shell server.
[  OK  ] Started Hostname Service.
         Starting WPA supplicant...
[  OK  ] Started WPA supplicant.
[*     ] (1 of 2) A start job is running for...ger Wait Online (10s / no limit)[**    ] (1 of 2) A start job is running for...ger Wait Online (11s / no limit)[***   ] (1 of 2) A start job is running for...ger Wait Online (11s / no limit)[ ***  ] (2 of 2) A start job is running for...m_patchram_plus (12s / no limit)[  *** ] (2 of 2) A start job is running for...m_patchram_plus (13s / no limit)[   ***] (2 of 2) A start job is running for...m_patchram_plus (13s / no limit)         Starting Load/Save RF Kill Switch Status...
[  OK  ] Started Load/Save RF Kill Switch Status.
[    **] (1 of 2) A start job is running for...ger Wait Online (18s / no limit)[     *] (1 of 2) A start job is running for...ger Wait Online (19s / no limit)[    **] (1 of 2) A start job is running for...ger Wait Online (19s / no limit)[   ***] (2 of 2) A start job is running for...m_patchram_plus (20s / no limit)[  *** ] (2 of 2) A start job is running for...m_patchram_plus (21s / no limit)[ ***  ] (2 of 2) A start job is running for...m_patchram_plus (21s / no limit)[***   ] (1 of 2) A start job is running for...ger Wait Online (22s / no limit)[**    ] (1 of 2) A start job is running for...ger Wait Online (22s / no limit)[*     ] (1 of 2) A start job is running for...ger Wait Online (23s / no limit)[**    ] (2 of 2) A start job is running for...m_patchram_plus (24s / no limit)[***   ] (2 of 2) A start job is running for...m_patchram_plus (24s / no limit)[ ***  ] (2 of 2) A start job is running for...m_patchram_plus (25s / no limit)[  *** ] (1 of 2) A start job is running for...ger Wait Online (25s / no limit)[   ***] (1 of 2) A start job is running for...ger Wait Online (26s / no limit)[    **] (1 of 2) A start job is running for...ger Wait Online (27s / no limit)[     *] (2 of 2) A start job is running for...m_patchram_plus (27s / no limit)[    **] (2 of 2) A start job is running for...m_patchram_plus (28s / no limit)[   ***] (2 of 2) A start job is running for...m_patchram_plus (28s / no limit)[  *** ] (1 of 2) A start job is running for...ger Wait Online (29s / no limit)[ ***  ] (1 of 2) A start job is running for...ger Wait Online (30s / no limit)[***   ] (1 of 2) A start job is running for...ger Wait Online (30s / no limit)[**    ] (2 of 2) A start job is running for...m_patchram_plus (31s / no limit)[*     ] (2 of 2) A start job is running for...m_patchram_plus (31s / no limit)[**    ] (2 of 2) A start job is running for...m_patchram_plus (32s / no limit)[***   ] (1 of 2) A start job is running for...ger Wait Online (33s / no limit)[ ***  ] (1 of 2) A start job is running for...ger Wait Online (33s / no limit)[  *** ] (1 of 2) A start job is running for...ger Wait Online (34s / no limit)[   ***] (2 of 2) A start job is running for...m_patchram_plus (34s / no limit)[    **] (2 of 2) A start job is running for...m_patchram_plus (35s / no limit)[FAILED] Failed to start Network Manager Wait Online.
See 'systemctl status NetworkManager-wait-online.service' for details.
[  OK  ] Reached target Network is Online.
         Starting /etc/rc.local Compatibility...
         Starting LSB: Start NTP daemon...
         Starting LSB: disk temperature monitoring daemon...
[   44.321581] rc.local[729]: ctp = 0
[  OK  ] Started /etc/rc.local Compatibility.
[  OK  ] Started LSB: disk temperature monitoring daemon.
[  OK  ] Started Serial Getty on ttyS0.
[  OK  ] Started Getty on tty1.
[  OK  ] Reached target Login Prompts.
         Starting Load/Save RF Kill Switch Status...
[  OK  ] Started Load/Save RF Kill Switch Status.
[  OK  ] Started LSB: Start NTP daemon.
[  OK  ] Started brcm_patchram_plus.
         Starting Bluetooth service...
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Started Bluetooth service.
         Starting Hostname Service...
[  OK  ] Reached target Bluetooth.
[  OK  ] Started Update UTMP about System Runlevel Changes.
[  OK  ] Started Hostname Service.

Ubuntu 16.04.2 LTS NanoPi-R1 ttyS0

Default Login:
Username = pi
Password = pi

NanoPi-R1 login: pi (automatic login)

 _____     _                _ _       _____ _     _____ ____ 
|  ___| __(_) ___ _ __   __| | |_   _| ____| |   | ____/ ___|
| |_ | '__| |/ _ \ '_ \ / _` | | | | |  _| | |   |  _|| |    
|  _|| |  | |  __/ | | | (_| | | |_| | |___| |___| |__| |___ 
|_|  |_|  |_|\___|_| |_|\__,_|_|\__, |_____|_____|_____\____|
                                |___/                        

Welcome to Ubuntu 16.04.2 LTS 4.14.111
System load:   0.44            	Up time:       49 sec		
Memory usage:  4 % of 998Mb  	IP:            
CPU temp:      14°C           	
Usage of /:    5% of 13G    	

 * Documentation: http://wiki.friendlyarm.com/Ubuntu
 * Forum: http://www.friendlyarm.com/Forum/

pi@NanoPi-R1:~$
Suite au démarrage, pas de login/mot de passe, un autologin avec compte pi (non root) + accès sudo qui donne 'la main' sans difficultés

Code : Tout sélectionner

pi@NanoPi-R1:~$ id                                                                                                                                       
uid=1000(pi) gid=1000(pi) groups=1000(pi),27(sudo),44(video),101(input)                                                                                  
pi@NanoPi-R1:~$ 

Code : Tout sélectionner

pi@NanoPi-R1:~$ sudo -kl                                                                                                                                 
Matching Defaults entries for pi on NanoPi-R1:                                                                                                           
    env_reset, mail_badpass,                                                                                                                             
    secure_path=/usr/local/sbin\:/usr/local/bin\:/usr/sbin\:/usr/bin\:/sbin\:/bin\:/snap/bin                                                             
                                                                                                                                                         
User pi may run the following commands on NanoPi-R1:                                                                                                     
    (ALL) NOPASSWD: ALL                                                                                                                                  
pi@NanoPi-R1:~$ 
Les points de montages et les devices blocks sont les suivants :

Code : Tout sélectionner

pi@NanoPi-R1:~$ lsblk
NAME         MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
mmcblk1boot0 179:16   0    4M  1 disk 
mmcblk1      179:8    0  7.3G  0 disk 
ââmmcblk1p3  179:11   0    7G  0 part 
ââmmcblk1p1  179:9    0   40M  0 part 
ââmmcblk1p2  179:10   0  256M  0 part 
mmcblk1boot1 179:24   0    4M  1 disk 
mmcblk0      179:0    0 14.9G  0 disk 
ââmmcblk0p2  179:2    0  2.1G  0 part 
ââmmcblk0p3  179:3    0 12.7G  0 part 
ââmmcblk0p1  179:1    0   40M  0 part /boot
pi@NanoPi-R1:~$ 

pi@NanoPi-R1:~$ df                                                                                                                                       
Filesystem     1K-blocks   Used Available Use% Mounted on                                                                                                
udev              474628      0    474628   0% /dev                                                                                                      
tmpfs             102260   3544     98716   4% /run                                                                                                      
overlay         13073952 524916  12532652   5% /                                                                                                         
tmpfs             511292      0    511292   0% /dev/shm                                                                                                  
tmpfs               5120      4      5116   1% /run/lock                                                                                                 
tmpfs             511292      0    511292   0% /sys/fs/cgroup                                                                                            
/dev/mmcblk0p1     40862  11932     28930  30% /boot                                                                                                     
tmpfs             102260      0    102260   0% /run/user/1000                                                                                            
pi@NanoPi-R1:~$ 


pi@NanoPi-R1:~$ mount
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=474628k,nr_inodes=118657,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=102260k,mode=755)
overlay on / type overlay (rw,relatime,lowerdir=/root,upperdir=/data/root,workdir=/data/work)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
cgroup on /sys/fs/cgroup/cpu type cgroup (rw,nosuid,nodev,noexec,relatime,cpu)
cgroup on /sys/fs/cgroup/net_cls type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
/dev/mmcblk0p1 on /boot type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=102260k,mode=700,uid=1000,gid=1000)
pi@NanoPi-R1:~$ 

Les 4 coeurs sont bien détectés et le GIC est correctement défini dans le DTS

Code : Tout sélectionner

pi@NanoPi-R1:~$ cat /proc/interrupts                                                                                                                      
           CPU0       CPU1       CPU2       CPU3                                                                                                          
 16:          0          0          0          0     GICv2  25 Level     vgic                                                                             
 17:          0          0          0          0     GICv2  50 Level     /soc/timer@01c20c00                                                              
cat /proc/interrupts 
           CPU0       CPU1       CPU2       CPU3       
 16:          0          0          0          0     GICv2  25 Level     vgic
 17:          0          0          0          0     GICv2  50 Level     /soc/timer@01c20c00
 18:          0          0          0          0     GICv2  29 Level     arch_timer
 19:      76163      12833      10114       5277     GICv2  30 Level     arch_timer
 20:          0          0          0          0     GICv2  27 Level     kvm guest timer
 22:          0          0          0          0     GICv2 120 Level     1ee0000.hdmi, dw-hdmi-cec
 24:          0          0          0          0     GICv2 118 Level     1c0c000.lcd-controller
 25:          0          0          0          0     GICv2  82 Level     1c02000.dma-controller
 26:       7113          0          0          0     GICv2  92 Level     sunxi-mmc
 27:       3330          0          0          0     GICv2  93 Level     sunxi-mmc
 28:        537          0          0          0     GICv2  94 Level     sunxi-mmc
 29:          0          0          0          0     GICv2 103 Level     musb-hdrc.4.auto
 30:          0          0          0          0     GICv2 104 Level     ehci_hcd:usb1
 31:          0          0          0          0     GICv2 105 Level     ohci_hcd:usb2
 32:      43763          0          0          0     GICv2 106 Level     ehci_hcd:usb3
 33:          0          0          0          0     GICv2 107 Level     ohci_hcd:usb6
 34:          0          0          0          0     GICv2 108 Level     ehci_hcd:usb4
 35:          0          0          0          0     GICv2 109 Level     ohci_hcd:usb7
 36:          0          0          0          0     GICv2 110 Level     ehci_hcd:usb5
 37:          0          0          0          0     GICv2 111 Level     ohci_hcd:usb8
 40:       2557          0          0          0     GICv2  63 Level     1c25000.ths
 42:          0          0          0          0     GICv2 114 Level     eth0
 43:          0          0          0          0     GICv2  97 Level     sun6i-spi
 46:       1427          0          0          0     GICv2  32 Level     ttyS0
 49:       1018          0          0          0     GICv2  35 Level     ttyS3
 50:          0          0          0          0     GICv2  38 Level     mv64xxx_i2c
 51:          0          0          0          0     GICv2  39 Level     mv64xxx_i2c
 52:          0          0          0          0     GICv2  40 Level     mv64xxx_i2c
 53:          0          0          0          0     GICv2  72 Level     1f00000.rtc
105:        169          0          0          0  sunxi_pio_level  42 Level     brcmf_oob_intr
107:          1          0          0          0  sunxi_pio_edge  44 Edge      usb0-id-det
130:          1          0          0          0  sunxi_pio_edge   3 Edge      reset
IPI0:          0          0          0          0  CPU wakeup interrupts
IPI1:          0          0          0          0  Timer broadcast interrupts
IPI2:       3357       5197       5945       4650  Rescheduling interrupts
IPI3:         16         14         16          8  Function call interrupts
IPI4:          0          0          0          0  CPU stop interrupts
IPI5:        246        317        105         20  IRQ work interrupts
IPI6:          0          0          0          0  completion interrupts
Err:          0
pi@NanoPi-R1:~$ 

Les modules noyaux mis en oeuvre sont :

Code : Tout sélectionner

pi@NanoPi-R1:~$ lsmod
Module                  Size  Used by
bnep                   20480  2
hci_uart               65536  1
btbcm                  16384  1 hci_uart
btqca                  16384  1 hci_uart
btintel                16384  1 hci_uart
bluetooth             299008  26 hci_uart,btintel,btqca,bnep,btbcm
ecdh_generic           28672  1 bluetooth
cdc_ether              16384  0
nls_ascii              16384  1
r8152                  45056  0
8189es               1024000  0
brcmfmac              180224  0
brcmutil               16384  1 brcmfmac
xradio_wlan           110592  0
88XXau               1753088  0
8821cu               1683456  0
g_mass_storage         16384  0
pi@NanoPi-R1:~$ 
La version de l'OS est :

Code : Tout sélectionner

pi@NanoPi-R1:~$ 
pi@NanoPi-R1:~$ cat /etc/debian_version 
stretch/sid
pi@NanoPi-R1:~$ lsb_release  
No LSB modules are available.
pi@NanoPi-R1:~$ 
L'OS est presque correctement installé ..

Code : Tout sélectionner

pi@NanoPi-R1:~$ dpkg -l |grep -v ii
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name                            Version                         Architecture Description
+++-===============================-===============================-============-==============================================================================
=
rc  localepurge                     0.7.3.4                         all          reclaim disk space by removing unneeded localizations
pi@NanoPi-R1:~$ 

Les interfaces réseau (Eth et Wlan) sont bien détectées

Code : Tout sélectionner

pi@NanoPi-R1:~$ ip route ls
pi@NanoPi-R1:~$ dpkg -l |wc -l
525
pi@NanoPi-R1:~$ 

L'interface réseau WLAN est bien détectée

Code : Tout sélectionner

pi@NanoPi-R1:~$ ip link ls                                                                                                                                
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000                                                  
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00                                                                                                 
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000                                            
    link/ether 02:81:c1:11:96:6f brd ff:ff:ff:ff:ff:ff                                                                                                    
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DORMANT group default qlen 1000                                   
    link/ether 8c:f7:10:9f:1c:ab brd ff:ff:ff:ff:ff:ff                                                                                                    
4: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000                                    
    link/ether 0a:c7:1f:78:55:fd brd ff:ff:ff:ff:ff:ff                                                                                                    
pi@NanoPi-R1:~$ 

Code : Tout sélectionner

pi@NanoPi-R1:~$ iw dev
phy#0
        Unnamed/non-netdev interface
                wdev 0x2
                addr da:b9:f3:9a:42:e0
                type P2P-device
        Interface wlan0
                ifindex 3
                wdev 0x1
                addr 8c:f7:10:9f:1c:ab
                type managed
                channel 1 (2412 MHz), width: 20 MHz, center1: 2412 MHz
pi@NanoPi-R1:~$ 
Les caractéristiques et capabilities (dont plan des fréquences et bit-rate) 802.11 de l'interface sont :

Code : Tout sélectionner

pi@NanoPi-R1:~$ iw phy
Wiphy phy0
        max # scan SSIDs: 10
        max scan IEs length: 2048 bytes
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports roaming.
        Supported Ciphers:
                * WEP40 (00-0f-ac:1)
                * WEP104 (00-0f-ac:5)
                * TKIP (00-0f-ac:2)
                * CCMP (00-0f-ac:4)
        Available Antennas: TX 0 RX 0
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * P2P-client
                 * P2P-GO
                 * P2P-device
        Band 1:
                Capabilities: 0x1020
                        HT20
                        Static SM Power Save
                        RX HT20 SGI
                        No RX STBC
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 16 usec (0x07)
                HT TX/RX MCS rate indexes supported: 0-7
                Bitrates (non-HT):
                        * 1.0 Mbps
                        * 2.0 Mbps (short preamble supported)
                        * 5.5 Mbps (short preamble supported)
                         * 11.0 Mbps (short preamble supported)
                        * 6.0 Mbps
                        * 9.0 Mbps
                        * 12.0 Mbps
                        * 18.0 Mbps
                        * 24.0 Mbps
                        * 36.0 Mbps
                        * 48.0 Mbps
                        * 54.0 Mbps
                Frequencies:
                        * 2412 MHz [1] (20.0 dBm)
                        * 2417 MHz [2] (20.0 dBm)
                        * 2422 MHz [3] (20.0 dBm)
                        * 2427 MHz [4] (20.0 dBm)
                        * 2432 MHz [5] (20.0 dBm)
                        * 2437 MHz [6] (20.0 dBm)
                        * 2442 MHz [7] (20.0 dBm)
                        * 2447 MHz [8] (20.0 dBm)
                        * 2452 MHz [9] (20.0 dBm)
                        * 2457 MHz [10] (20.0 dBm)
                        * 2462 MHz [11] (20.0 dBm)
                        * 2467 MHz [12] (20.0 dBm)
                        * 2472 MHz [13] (20.0 dBm)
                        * 2484 MHz [14] (20.0 dBm)
        Supported commands:
                 * new_interface
                 * set_interface
                 * new_key
                 * start_ap
                 * join_ibss
                 * set_pmksa
                 * del_pmksa
                 * flush_pmksa
                 * remain_on_channel
                 * frame
                 * set_wiphy_netns
                 * set_channel
                 * start_sched_scan
                 * start_p2p_device
                 * connect
                 * disconnect
                 * crit_protocol_start
                 * crit_protocol_stop
                 * Unknown command (122)
        Supported TX frame types:
                 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
        Supported RX frame types:
                 * managed: 0x40 0xd0
                 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * P2P-client: 0x40 0xd0
                 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * P2P-device: 0x40 0xd0
        software interface modes (can always be added):
        valid interface combinations:
                 * #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
                   total <= 3, #channels <= 2
                 * #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
                   total <= 4, #channels <= 1
        Device supports scan flush.
pi@NanoPi-R1:~$ 
                       
:D
Cordialement

Répondre