[nanopir1] [armbian] kernel Linux 5.4.31-sunxi

Discussions sur les cartes Nanopi R1, Neo, K1, etc.)
https://www.friendlyarm.com/
Répondre
jeanmarc
Messages : 43
Enregistré le : dim. mars 22, 2020 5:28 pm
Localisation : Essonne

[nanopir1] [armbian] kernel Linux 5.4.31-sunxi

Message par jeanmarc »

Bonjour,
Sur la distribution Armbian, un petit soucis....

Code : Tout sélectionner


U-Boot 2019.04-armbian (Nov 18 2019 - 22:07:46 +0100) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: FriendlyARM NanoPi R1
DRAM:  1 GiB
MMC:   mmc@1c0f000: 0, mmc@1c11000: 1
Loading Environment from EXT4... ** File not found /boot/boot.env **

** Unable to read "/boot/boot.env" from mmc0:1 **
In:    serial
Out:   serial
Err:   serial
Net:   phy interface7

Error: ethernet@1c30000 address not set.
eth-1: ethernet@1c30000
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
USB2:   USB EHCI 1.00
USB3:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 2 USB Device(s) found
scanning bus 3 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Autoboot in 1 seconds, press <Space> to stop
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
3798 bytes read in 3 ms (1.2 MiB/s)
## Executing script at 43100000
U-boot loaded from SD
Boot script loaded from mmc
512 bytes read in 1 ms (500 KiB/s)
9070677 bytes read in 691 ms (12.5 MiB/s)
7834832 bytes read in 599 ms (12.5 MiB/s)
Found mainline kernel configuration
30069 bytes read in 8 ms (3.6 MiB/s)
504 bytes read in 11 ms (43.9 KiB/s)
Applying kernel provided DT overlay sun8i-h3-usbhost0.dtbo
504 bytes read in 10 ms (48.8 KiB/s)
Applying kernel provided DT overlay sun8i-h3-usbhost1.dtbo
504 bytes read in 10 ms (48.8 KiB/s)
Applying kernel provided DT overlay sun8i-h3-usbhost2.dtbo
4185 bytes read in 8 ms (510.7 KiB/s)
Applying kernel provided DT fixup script (sun8i-h3-fixup.scr)
## Executing script at 44000000
## Loading init Ramdisk from Legacy Image at 43300000 ...
   Image Name:   uInitrd
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    9070613 Bytes = 8.7 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 43000000
   Booting using the fdt blob at 0x43000000
EHCI failed to shut down host controller.
   Loading Ramdisk to 49759000, end 49fff815 ... OK
   Loading Device Tree to 496e9000, end 49758fff ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.4.31-sunxi (root@builder) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #20.02.11 SMP Thu Apr 9 21:47:57 CEST 2020
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: FriendlyElec NanoPi-R1
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 128 MiB at 0x77c00000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] percpu: Embedded 20 pages/cpu s49868 r8192 d23860 u81920
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 260416
[    0.000000] Kernel command line: root=UUID=66786fa5-d0ca-4f8c-b474-98a2942e8ebb rootwait rootfstype=ext4 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=7 ubootpart=04c42308-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u   sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] allocated 1048576 bytes of page_ext
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 881000K/1048576K available (9216K kernel code, 1053K rwdata, 2880K rodata, 1024K init, 316K bss, 36504K reserved, 131072K cma-reserved, 131060K highmem)
[    0.000000] random: get_random_u32 called from __kmem_cache_create+0x2b/0x3ac with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 41306 entries in 81 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000011] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000033] Switching to timer-based delay loop, resolution 41ns
[    0.000401] Console: colour dummy device 80x30
[    0.000495] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.000519] pid_max: default: 32768 minimum: 301
[    0.000915] LSM: Security Framework initializing
[    0.001084] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001111] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001259] *** VALIDATE tmpfs ***
[    0.002442] *** VALIDATE proc ***
[    0.002962] *** VALIDATE cgroup1 ***
[    0.002983] *** VALIDATE cgroup2 ***
[    0.003093] CPU: Testing write buffer coherency: ok
[    0.003769] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.004831] Setting up static identity map for 0x40100000 - 0x40100054
[    0.005051] rcu: Hierarchical SRCU implementation.
[    0.006045] smp: Bringing up secondary CPUs ...
[    0.017287] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.028743] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.040052] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.040259] smp: Brought up 1 node, 4 CPUs
[    0.040294] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.040305] CPU: All CPU(s) started in HYP mode.
[    0.040314] CPU: Virtualization extensions available.
[    0.041751] devtmpfs: initialized
[    0.054603] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.055069] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.055109] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.064338] xor: measuring software checksum speed
[    0.104155]    arm4regs  :   598.000 MB/sec
[    0.144269]    8regs     :   416.000 MB/sec
[    0.184396]    32regs    :   393.000 MB/sec
[    0.224523]    neon      :   605.000 MB/sec
[    0.224537] xor: using function: neon (605.000 MB/sec)
[    0.224655] pinctrl core: initialized pinctrl subsystem
[    0.226411] NET: Registered protocol family 16
[    0.229511] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.230567] audit: initializing netlink subsys (disabled)
[    0.230905] audit: type=2000 audit(0.204:1): state=initialized audit_enabled=0 res=1
[    0.231979] cpuidle: using governor ladder
[    0.232050] cpuidle: using governor menu
[    0.233187] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.233202] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.353295] raid6: neonx8   gen()   337 MB/s
[    0.421332] raid6: neonx8   xor()   280 MB/s
[    0.489540] raid6: neonx4   gen()   346 MB/s
[    0.557736] raid6: neonx4   xor()   293 MB/s
[    0.625803] raid6: neonx2   gen()   315 MB/s
[    0.693988] raid6: neonx2   xor()   278 MB/s
[    0.762149] raid6: neonx1   gen()   235 MB/s
[    0.830386] raid6: neonx1   xor()   222 MB/s
[    0.898800] raid6: int32x8  gen()   127 MB/s
[    0.966791] raid6: int32x8  xor()    83 MB/s
[    1.034857] raid6: int32x4  gen()   135 MB/s
[    1.103103] raid6: int32x4  xor()    93 MB/s
[    1.171490] raid6: int32x2  gen()   122 MB/s
[    1.239530] raid6: int32x2  xor()    98 MB/s
[    1.308007] raid6: int32x1  gen()    95 MB/s
[    1.375756] raid6: int32x1  xor()    83 MB/s
[    1.375769] raid6: using algorithm neonx4 gen() 346 MB/s
[    1.375779] raid6: .... xor() 293 MB/s, rmw enabled
[    1.375791] raid6: using neon recovery algorithm
[    1.378314] iommu: Default domain type: Translated 
[    1.378981] SCSI subsystem initialized
[    1.379860] usbcore: registered new interface driver usbfs
[    1.379951] usbcore: registered new interface driver hub
[    1.380104] usbcore: registered new device driver usb
[    1.380498] mc: Linux media interface: v0.10
[    1.380573] videodev: Linux video capture interface: v2.00
[    1.380791] pps_core: LinuxPPS API ver. 1 registered
[    1.380804] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.380841] PTP clock support registered
[    1.383897] clocksource: Switched to clocksource arch_sys_counter
[    3.129592] *** VALIDATE bpf ***
[    3.130070] VFS: Disk quotas dquot_6.6.0
[    3.130209] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    3.130386] *** VALIDATE ramfs ***
[    3.145034] thermal_sys: Registered thermal governor 'fair_share'
[    3.145044] thermal_sys: Registered thermal governor 'bang_bang'
[    3.145065] thermal_sys: Registered thermal governor 'step_wise'
[    3.145077] thermal_sys: Registered thermal governor 'power_allocator'
[    3.145956] NET: Registered protocol family 2
[    3.147262] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    3.147325] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    3.147469] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    3.147706] TCP: Hash tables configured (established 8192 bind 8192)
[    3.148010] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    3.148108] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    3.148543] NET: Registered protocol family 1
[    3.149437] RPC: Registered named UNIX socket transport module.
[    3.149455] RPC: Registered udp transport module.
[    3.149466] RPC: Registered tcp transport module.
[    3.149477] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.149963] Trying to unpack rootfs image as initramfs...
[    4.274919] Freeing initrd memory: 8860K
[    4.277354] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    4.279574] Initialise system trusted keyrings
[    4.280008] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    4.293273] zbud: loaded
[    4.297817] NFS: Registering the id_resolver key type
[    4.297871] Key type id_resolver registered
[    4.297883] Key type id_legacy registered
[    4.297910] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    4.297923] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    4.300612] JFS: nTxBlock = 7976, nTxLock = 63808
[    4.314969] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    4.418612] Key type asymmetric registered
[    4.418639] Asymmetric key parser 'x509' registered
[    4.418757] bounce: pool size: 64 pages
[    4.418886] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    4.419282] io scheduler mq-deadline registered
[    4.419300] io scheduler kyber registered
[    4.419431] io scheduler bfq registered
[    4.430995] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    4.434002] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[    4.445998] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    4.450424] sun8i-h3-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pa not found, using dummy regulator
[    4.451185] printk: console [ttyS0] disabled
[    4.471485] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 42, base_baud = 1500000) is a U6_16550A
[    5.351518] printk: console [ttyS0] enabled
[    5.368197] brd: module loaded
[    5.383157] loop: module loaded
[    5.389488] libphy: Fixed MDIO Bus: probed
[    5.394898] sun8i-h3-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pd not found, using dummy regulator
[    5.405104] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
[    5.411493] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
[    5.417617] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
[    5.425321] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.431879] ehci-platform: EHCI generic platform driver
[    5.437414] ehci-platform 1c1a000.usb: EHCI Host Controller
[    5.443058] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
[    5.451409] ehci-platform 1c1a000.usb: irq 28, io mem 0x01c1a000
[    5.471879] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[    5.478502] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    5.486813] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.494062] usb usb1: Product: EHCI Host Controller
[    5.498966] usb usb1: Manufacturer: Linux 5.4.31-sunxi ehci_hcd
[    5.504909] usb usb1: SerialNumber: 1c1a000.usb
[    5.510476] hub 1-0:1.0: USB hub found
[    5.514386] hub 1-0:1.0: 1 port detected
[    5.519402] ehci-platform 1c1b000.usb: EHCI Host Controller
[    5.525073] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 2
[    5.533131] ehci-platform 1c1b000.usb: irq 30, io mem 0x01c1b000
[    5.551880] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[    5.558445] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    5.566757] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.574005] usb usb2: Product: EHCI Host Controller
[    5.578908] usb usb2: Manufacturer: Linux 5.4.31-sunxi ehci_hcd
[    5.584864] usb usb2: SerialNumber: 1c1b000.usb
[    5.590334] hub 2-0:1.0: USB hub found
[    5.594211] hub 2-0:1.0: 1 port detected
[    5.599159] ehci-platform 1c1c000.usb: EHCI Host Controller
[    5.604821] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
[    5.612888] ehci-platform 1c1c000.usb: irq 32, io mem 0x01c1c000
[    5.631885] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[    5.638435] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    5.646743] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.653990] usb usb3: Product: EHCI Host Controller
[    5.658892] usb usb3: Manufacturer: Linux 5.4.31-sunxi ehci_hcd
[    5.664835] usb usb3: SerialNumber: 1c1c000.usb
[    5.670252] hub 3-0:1.0: USB hub found
[    5.674145] hub 3-0:1.0: 1 port detected
[    5.679052] ehci-platform 1c1d000.usb: EHCI Host Controller
[    5.684719] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 4
[    5.692768] ehci-platform 1c1d000.usb: irq 34, io mem 0x01c1d000
[    5.711878] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
[    5.718409] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    5.726725] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.733972] usb usb4: Product: EHCI Host Controller
[    5.738876] usb usb4: Manufacturer: Linux 5.4.31-sunxi ehci_hcd
[    5.744818] usb usb4: SerialNumber: 1c1d000.usb
[    5.750271] hub 4-0:1.0: USB hub found
[    5.754142] hub 4-0:1.0: 1 port detected
[    5.758988] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.765251] ohci-platform: OHCI generic platform driver
[    5.770850] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[    5.777530] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 5
[    5.785554] ohci-platform 1c1a400.usb: irq 29, io mem 0x01c1a400
[    5.852441] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    5.860749] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.867999] usb usb5: Product: Generic Platform OHCI controller
[    5.873938] usb usb5: Manufacturer: Linux 5.4.31-sunxi ohci_hcd
[    5.879882] usb usb5: SerialNumber: 1c1a400.usb
[    5.885351] hub 5-0:1.0: USB hub found
[    5.889251] hub 5-0:1.0: 1 port detected
[    5.894141] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[    5.900854] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 6
[    5.908915] ohci-platform 1c1b400.usb: irq 31, io mem 0x01c1b400
[    5.931885] usb 2-1: new high-speed USB device number 2 using ehci-platform
[    5.965600] usb 2-1: New USB device found, idVendor=0bda, idProduct=8152, bcdDevice=20.00
[    5.973820] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.976320] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    5.980991] usb 2-1: Product: USB 10/100 LAN
[    5.989266] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.989279] usb usb6: Product: Generic Platform OHCI controller
[    5.993571] usb 2-1: Manufacturer: Realtek
[    6.000787] usb usb6: Manufacturer: Linux 5.4.31-sunxi ohci_hcd
[    6.000800] usb usb6: SerialNumber: 1c1b400.usb
[    6.006730] usb 2-1: SerialNumber: 000000000000
[    6.011762] hub 6-0:1.0: USB hub found
[    6.029717] hub 6-0:1.0: 1 port detected
[    6.034625] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[    6.041316] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 7
[    6.049339] ohci-platform 1c1c400.usb: irq 33, io mem 0x01c1c400
[    6.091882] usb 4-1: new high-speed USB device number 2 using ehci-platform
[    6.116285] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    6.124591] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.131844] usb usb7: Product: Generic Platform OHCI controller
[    6.137785] usb usb7: Manufacturer: Linux 5.4.31-sunxi ohci_hcd
[    6.140500] usb 4-1: New USB device found, idVendor=148f, idProduct=761a, bcdDevice= 1.00
[    6.143723] usb usb7: SerialNumber: 1c1c400.usb
[    6.151914] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.157326] hub 7-0:1.0: USB hub found
[    6.163616] usb 4-1: Product: WiFi
[    6.167452] hub 7-0:1.0: 1 port detected
[    6.170803] usb 4-1: Manufacturer: MediaTek
[    6.170816] usb 4-1: SerialNumber: 1.0
[    6.175726] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
[    6.189403] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 8
[    6.197407] ohci-platform 1c1d400.usb: irq 35, io mem 0x01c1d400
[    6.264291] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    6.272603] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.279852] usb usb8: Product: Generic Platform OHCI controller
[    6.285795] usb usb8: Manufacturer: Linux 5.4.31-sunxi ohci_hcd
[    6.291736] usb usb8: SerialNumber: 1c1d400.usb
[    6.297157] hub 8-0:1.0: USB hub found
[    6.301029] hub 8-0:1.0: 1 port detected
[    6.307038] usbcore: registered new interface driver usb-storage
[    6.313692] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator
[    6.328099] sun6i-rtc 1f00000.rtc: registered as rtc0
[    6.333197] sun6i-rtc 1f00000.rtc: RTC enabled
[    6.338187] i2c /dev entries driver
[    6.345507] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    6.354519] sun8i-h3-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator
[    6.365688] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    6.395751] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
[    6.403179] sun8i-h3-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pg not found, using dummy regulator
[    6.414986] sun8i-h3-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pc not found, using dummy regulator
[    6.451507] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
[    6.459435] sun8i-h3-r-pinctrl 1f02c00.pinctrl: 1f02c00.pinctrl supply vcc-pl not found, using dummy regulator
[    6.461171] mmc0: host does not support reading read-only switch, assuming write-enable
[    6.469989] sun8i-h3-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pg not found, using dummy regulator
[    6.483482] mmc0: new high speed SDHC card at address aaaa
[    6.493467] ledtrig-cpu: registered to indicate activity on CPUs
[    6.494280] mmcblk0: mmc0:aaaa SC16G 14.8 GiB 
[    6.499743] hidraw: raw HID events driver (C) Jiri Kosina
[    6.509790] usbcore: registered new interface driver usbhid
[    6.515352]  mmcblk0: p1 p2 < p5 p6 p7 p8 p9 >
[    6.515405] usbhid: USB HID core driver
[    6.527221] Initializing XFRM netlink socket
[    6.532702] NET: Registered protocol family 10
[    6.640068] mmc1: new DDR MMC card at address 0001
[    6.646731] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB 
[    6.652227] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
[    6.658059] Segment Routing with IPv6
[    6.659078] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
[    6.662054] NET: Registered protocol family 17
[    6.670744]  mmcblk1: p1 p2 p3
[    6.672350] NET: Registered protocol family 15
[    6.672474] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    6.693265] 8021q: 802.1Q VLAN Support v1.8
[    6.697608] Key type dns_resolver registered
[    6.702813] Registering SWP/SWPB emulation handler
[    6.708111] registered taskstats version 1
[    6.712262] Loading compiled-in X.509 certificates
[    6.717274] zswap: loaded using pool lzo/zbud
[    6.722187] Key type ._fscrypt registered
[    6.726262] Key type .fscrypt registered
[    6.735481] Btrfs loaded, crc32c=crc32c-generic
[    6.799214] Key type encrypted registered
[    6.823637] sun8i-h3-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pd not found, using dummy regulator
[    6.836108] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
[    6.842513] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
[    6.848634] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
[    6.854669] dwmac-sun8i 1c30000.ethernet: 1c30000.ethernet supply phy-io not found, using dummy regulator
[    6.972292] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 50006 (expect 58000)
[    6.981675] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
[    6.988926] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
[    6.996170] dwmac-sun8i 1c30000.ethernet: COE Type 2
[    7.001158] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
[    7.007971] dwmac-sun8i 1c30000.ethernet: Normal descriptors
[    7.013653] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
[    7.019647] libphy: stmmac: probed
[    7.024461] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
[    7.030792] libphy: mdio_mux: probed
[    7.034432] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
[    7.040821] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
[    7.066300] ac200: Unknown symbol ac200_reg_mod (err -2)
[    7.071743] ac200: Unknown symbol ac200_reg_write (err -2)
[    7.079715] libphy: mdio_mux: probed
[    7.083393] dwmac-sun8i 1c30000.ethernet: Switch mux to external PHY
[    7.126468] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01T00:00:14 UTC (14)
[    7.134870] of_cfs_init
[    7.137536] of_cfs_init: OK
[    7.148369] Freeing unused kernel memory: 1024K
[    7.172313] Run /init as init process
Loading, please wait...
Starting version 241
sd-device-enumerator: Scanning /sys/bus
sd-device-enumerator: Scan all dirs
sd-device-enumerator: Scanning /sys/bus
sd-device-enumerator: Scanning /sys/class
[    7.825991] input: r_gpio_keys as /devices/platform/r_gpio_keys/input/input0
[    7.979756] random: fast init done
[    8.071675] dwmac-sun8i 1c30000.ethernet et-wan: renamed from eth0
[    8.104187] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
[    8.135476] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB
[    8.184832] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[    8.193158] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    8.204064] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    8.218050] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[    8.229554] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
[    8.339569] mmc2: new high speed SDIO card at address 0001
done.
Begin: Will now check root file system ... fsck from util-linux 2.33.1
[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1 
/dev/mmcblk0p1: recovering journal
[   10.501467] random: crng init done
/dev/mmcblk0p1: Clearing orphaned inode 410 (uid=0, gid=0, mode=0100644, size=3663088)
/dev/mmcblk0p1: clean, 38196/184000 files, 540928/742400 blocks
done.
[   10.727355] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.93 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting hotplug events dispatcher: systemd-udevd[ ok .
[....] Synthesizing the initial hotplug events (subsystems)...sd-device-enumerator: Scanning /sys/bus
[ ok done.
[....] Synthesizing the initial hotplug events (devices)...sd-device-enumerator: Scan all dirs
sd-device-enumerator: Scanning /sys/bus
sd-device-enumerator: Scanning /sys/class
[   13.719177] core: _opp_supported_by_regulators: OPP minuV: 1320000 maxuV: 1320000, not supported by regulator
[   13.729406] cpu cpu0: _opp_add: OPP not supported by regulators (1104000000)
[   13.736758] core: _opp_supported_by_regulators: OPP minuV: 1320000 maxuV: 1320000, not supported by regulator
[   13.746776] cpu cpu0: _opp_add: OPP not supported by regulators (1200000000)
[   13.754203] core: _opp_supported_by_regulators: OPP minuV: 1340000 maxuV: 1340000, not supported by regulator
[   13.764201] cpu cpu0: _opp_add: OPP not supported by regulators (1296000000)
[   13.771599] core: _opp_supported_by_regulators: OPP minuV: 1400000 maxuV: 1400000, not supported by regulator
[   13.781607] cpu cpu0: _opp_add: OPP not supported by regulators (1368000000)
[ ok done.
[   13.870551] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned.
[....] Waiting for /dev to be fully populated...[   13.891991] cedrus 1c0e000.video-codec: Device registered as /dev/video0
[   14.025304] usbcore: registered new interface driver r8152
[   14.055701] usbcore: registered new interface driver cdc_ether
[   14.129582] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   14.168032] usb 2-1: reset high-speed USB device number 2 using ehci-platform
[   14.187751] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   14.232365] r8152 2-1:1.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00
[   14.241673] r8152 2-1:1.0 (unnamed net_device) (uninitialized): Random ether addr c6:d5:d8:c3:51:7d
[   14.276502] lima 1c40000.gpu: IRQ ppmmu2 not found
[   14.281357] lima 1c40000.gpu: IRQ ppmmu3 not found
[   14.282766] r8152 2-1:1.0 eth0: v1.10.11
[   14.286212] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
[   14.296436] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
[   14.302858] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
[   14.309253] lima 1c40000.gpu: IRQ pp2 not found
[   14.313842] lima 1c40000.gpu: IRQ pp3 not found
[   14.318491] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
[   14.327590] lima 1c40000.gpu: bus rate = 200000000
[   14.332491] lima 1c40000.gpu: mod rate = 384000000
[   14.334359] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[   14.338001] [drm] Initialized lima 1.0.0 20190217 for 1c40000.gpu on minor 0
[   14.349527] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   14.362002] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
[   14.428617] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.friendlyarm,nanopi-r1.txt failed with error -2
[   14.440364] brcmfmac mmc2:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43430-sdio.friendlyarm,nanopi-r1.txt
[   14.643978] usb 4-1: reset high-speed USB device number 2 using ehci-platform
[   14.686796] mt76x0u 4-1:1.0: ASIC revision: 76100002 MAC revision: 76502000
[   14.719217] cfg80211: failed to load regulatory.db
[   14.740618] r8152 2-1:1.0 et-prod: renamed from eth0
[   14.843713] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[   14.855637] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available
[   14.867531] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Mar 30 2016 11:30:56 version 7.45.77.h8.4 FWID 01-ee8a6268
[   14.940572] brcmfmac mmc2:0001:1 wlan-ap0: renamed from wlan0
[   15.853615] mt76x0u 4-1:1.0: EEPROM ver:02 fae:01
[   16.341846] usbcore: registered new interface driver mt76x0u
[   16.412733] mt76x0u 4-1:1.0 wlan-ap1: renamed from wlan0
[ ok done.
Starting fake hwclock: loading system time.

ansible@srv-nanopir1-170:~$ 
filename:       /lib/modules/5.4.31-sunxi/kernel/drivers/net/tun.ko
alias:          devname:net/tun
alias:          char-major-10-200
license:        GPL
author:         (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
description:    Universal TUN/TAP device driver
depends:        
intree:         Y
name:           tun
vermagic:       5.4.31-sunxi SMP mod_unload ARMv7 thumb2 p2v8 
ansible@srv-nanopir1-170:~$ 
ansible@srv-nanopir1-170:~$ 
ansible@srv-nanopir1-170:~$ 
ansible@srv-nanopir1-170:~$ 
ansible@srv-nanopir1-170:~$ [76253.128392] device wlan-ap1 left promiscuous mode
[76253.133295] br-wifi: port 2(wlan-ap1) entered disabled state
[76262.102161] br-wifi: port 2(wlan-ap1) entered blocking state
[76262.107885] br-wifi: port 2(wlan-ap1) entered disabled state
[76262.113937] device wlan-ap1 entered promiscuous mode
[76262.646783] br-wifi: port 2(wlan-ap1) entered blocking state
[76262.652500] br-wifi: port 2(wlan-ap1) entered forwarding state
[83673.805499] rcu: INFO: rcu_sched self-detected stall on CPU
[83673.811539] rcu: 	2-...!: (2 GPs behind) idle=c0e/0/0x1 softirq=3556706/3556707 fqs=1 
[83673.819614] 	(t=251255 jiffies g=9568181 q=130)
[83673.824144] Sending NMI from CPU 2 to CPUs 0:
[83683.828905] NMI backtrace for cpu 2
[83683.832395] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G         C        5.4.31-sunxi #20.02.11
[83683.840819] Hardware name: Allwinner sun8i Family
[83683.845548] [<c010da8d>] (unwind_backtrace) from [<c010a0ad>] (show_stack+0x11/0x14)
[83683.853294] [<c010a0ad>] (show_stack) from [<c0951def>] (dump_stack+0x6f/0x7c)
[83683.860517] [<c0951def>] (dump_stack) from [<c095635b>] (nmi_cpu_backtrace+0x6b/0x94)
[83683.868343] [<c095635b>] (nmi_cpu_backtrace) from [<c0956455>] (nmi_trigger_cpumask_backtrace+0xd1/0xdc)
[83683.877817] [<c0956455>] (nmi_trigger_cpumask_backtrace) from [<c016e3d1>] (rcu_dump_cpu_stacks+0x7f/0x9c)
[83683.887462] [<c016e3d1>] (rcu_dump_cpu_stacks) from [<c016d75d>] (rcu_sched_clock_irq+0x5a5/0x71c)
[83683.896415] [<c016d75d>] (rcu_sched_clock_irq) from [<c0173789>] (update_process_times+0x29/0x50)
[83683.905284] [<c0173789>] (update_process_times) from [<c0181c2f>] (tick_sched_timer+0x37/0x74)
[83683.913890] [<c0181c2f>] (tick_sched_timer) from [<c01741b7>] (__hrtimer_run_queues+0xff/0x258)
[83683.922581] [<c01741b7>] (__hrtimer_run_queues) from [<c0174b89>] (hrtimer_interrupt+0xd1/0x200)
[83683.931362] [<c0174b89>] (hrtimer_interrupt) from [<c07dfe6f>] (arch_timer_handler_phys+0x27/0x2c)
[83683.940317] [<c07dfe6f>] (arch_timer_handler_phys) from [<c01643b7>] (handle_percpu_devid_irq+0x57/0x1a0)
[83683.949878] [<c01643b7>] (handle_percpu_devid_irq) from [<c0160059>] (generic_handle_irq+0x1d/0x28)
[83683.958918] [<c0160059>] (generic_handle_irq) from [<c0160513>] (__handle_domain_irq+0x43/0x84)
[83683.967615] [<c0160513>] (__handle_domain_irq) from [<c05e3b6d>] (gic_handle_irq+0x39/0x6c)
[83683.975961] [<c05e3b6d>] (gic_handle_irq) from [<c0101ae5>] (__irq_svc+0x65/0x94)
[83683.983432] Exception stack(0xef155f60 to 0xef155fa8)
[83683.988472] 5f60: 00000000 04731c0c ef6c7f34 c0116341 ffffe000 c0f04f68 c0f04fb0 00000004
[83683.996642] 5f80: c0f04f48 00000000 c0ec48f0 c0ff67f6 000ea266 ef155fb0 c010792f c0107930
[83684.004806] 5fa0: 40010033 ffffffff
[83684.008300] [<c0101ae5>] (__irq_svc) from [<c0107930>] (arch_cpu_idle+0x28/0x2c)
[83684.015693] [<c0107930>] (arch_cpu_idle) from [<c013fa47>] (do_idle+0x15b/0x1cc)
[83684.023083] [<c013fa47>] (do_idle) from [<c013fcb1>] (cpu_startup_entry+0x19/0x20)
[83684.030646] [<c013fcb1>] (cpu_startup_entry) from [<40102531>] (0x40102531)
[88246.151465] device wlan-ap1 left promiscuous mode
[88246.156358] br-wifi: port 2(wlan-ap1) entered disabled state


:twisted:
Cordialement

Répondre