[cubie4] [dft+Debian Stretch 9.4] kernel 4.16.6

Discussions sur les cartes "Cubie" (1, 2, CubieTruck, etc.)
http://www.cubietech.com/
Post Reply
jeanmarc
Posts: 132
Joined: Sun Mar 22, 2020 5:28 pm
Location: Essonne

[cubie4] [dft+Debian Stretch 9.4] kernel 4.16.6

Post by jeanmarc »

Bonjour,

Ce post pour info concernant les travaux de 2018 sur la cubie4 relatifs à la production d'une image Debian avec DFT

Code: Select all

U-Boot SPL 2018.03 (Mar 14 2018 - 18:04:17 +0100)
DRAM: 2048 MiB
Trying to boot from MMC1


U-Boot 2018.03 (Mar 14 2018 - 18:04:17 +0100) Allwinner Technology

CPU:   Allwinner A80 (SUN9I)
Model: Cubietech Cubieboard4
DRAM:  2 GiB
MMC:   SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
Loading Environment from FAT... *** Warning - bad CRC, using default environment

Failed (-5)
Loading Environment from MMC... *** Warning - bad CRC, using default environment

Failed (-5)
In:    serial@07000000
Out:   serial@07000000
Err:   serial@07000000
Net:   No ethernet found.
starting USB...
No controllers found
Hit any key to stop autoboot:  2  1  0 
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
1759 bytes read in 237 ms (6.8 KiB/s)
## Executing script at 23100000
366 bytes read in 165 ms (2 KiB/s)
391 bytes read in 157 ms (2 KiB/s)
5202816 bytes read in 671 ms (7.4 MiB/s)
18870 bytes read in 793 ms (22.5 KiB/s)
## Flattened Device Tree blob at 23000000
   Booting using the fdt blob at 0x23000000
   Loading Device Tree to 29ff8000, end 29fff9b5 ... OK

Starting kernel ...

‚r‚‚‚‚‚‚êBooting Linux on physical CPU 0x0
[    0.000000] Linux version 4.16.6 (william@odroid-xu4-01) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP Wed May 2 19:15:07 CEST 2018
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Cubietech Cubieboard4
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] random: get_random_bytes called from start_kernel+0xa0/0x414 with crng_init=0
[    0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s37388 r8192 d24052 u69632
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 522560
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw rootfstype=ext4
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 2065172K/2097152K available (7168K kernel code, 562K rwdata, 2488K rodata, 1024K init, 282K bss, 31980K reserved, 0K cma-reserved, 1310720K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (8160 kB)
[    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
[    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 563 kB)
[    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 283 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU event tracing is enabled.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000019] Switching to timer-based delay loop, resolution 41ns
[    0.000262] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000754] Console: colour dummy device 80x30
[    0.000797] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[    0.000813] pid_max: default: 32768 minimum: 301
[    0.001147] Security Framework initialized
[    0.001163] Yama: becoming mindful.
[    0.001198] AppArmor: AppArmor disabled by boot time parameter
[    0.001313] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001331] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002111] CPU: Testing write buffer coherency: ok
[    0.002444] /cpus/cpu@0 missing clock-frequency property
[    0.002464] /cpus/cpu@1 missing clock-frequency property
[    0.002480] /cpus/cpu@2 missing clock-frequency property
[    0.002496] /cpus/cpu@3 missing clock-frequency property
[    0.002512] /cpus/cpu@100 missing clock-frequency property
[    0.002530] /cpus/cpu@101 missing clock-frequency property
[    0.002548] /cpus/cpu@102 missing clock-frequency property
[    0.002568] /cpus/cpu@103 missing clock-frequency property
[    0.002580] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.003010] Setting up static identity map for 0x20100000 - 0x20100060
[    0.003144] Hierarchical SRCU implementation.
[    0.005330] smp: Bringing up secondary CPUs ...
[    0.008918] smp: Brought up 1 node, 1 CPU
[    0.008935] SMP: Total of 1 processors activated (48.00 BogoMIPS).
[    0.008942] CPU: All CPU(s) started in SVC mode.
[    0.009987] devtmpfs: initialized
[    0.014180] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.014466] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.014490] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.014913] pinctrl core: initialized pinctrl subsystem
[    0.015910] NET: Registered protocol family 16
[    0.016371] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.016798] audit: initializing netlink subsys (disabled)
[    0.017380] cpuidle: using governor ladder
[    0.017392] cpuidle: using governor menu
[    0.017494] No ATAGs?
[    0.017552] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.017564] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.027775] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1
[    0.029965] SCSI subsystem initialized
[    0.030434] usbcore: registered new interface driver usbfs
[    0.030480] usbcore: registered new interface driver hub
[    0.030597] usbcore: registered new device driver usb
[    0.030777] pps_core: LinuxPPS API ver. 1 registered
[    0.030786] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.030805] PTP clock support registered
[    0.030999] Advanced Linux Sound Architecture Driver Initialized.
[    0.031895] clocksource: Switched to clocksource arch_sys_counter
[    0.032143] VFS: Disk quotas dquot_6.6.0
[    0.032224] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.040213] NET: Registered protocol family 2
[    0.040967] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    0.041000] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.041080] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.041196] TCP: Hash tables configured (established 8192 bind 8192)
[    0.041353] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.041409] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.041677] NET: Registered protocol family 1
[    0.042204] NetWinder Floating Point Emulator V0.97 (extended precision)
[    0.043589] Initialise system trusted keyrings
[    0.043640] Key type blacklist registered
[    0.043908] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    0.044498] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.046165] Key type asymmetric registered
[    0.046177] Asymmetric key parser 'x509' registered
[    0.046234] bounce: pool size: 64 pages
[    0.046308] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.046320] io scheduler noop registered
[    0.046328] io scheduler deadline registered
[    0.046407] io scheduler cfq registered (default)
[    0.046417] io scheduler mq-deadline registered
[    0.046425] io scheduler kyber registered
[    0.046663] sunxi-rsb 8003400.i2c: could not find pctldev for node /soc/pinctrl@08002c00/r_rsb, deferring probe
[    0.053337] sun9i-a80-pinctrl 6000800.pinctrl: initialized sunXi PIO driver
[    0.056049] sun9i-a80-r-pinctrl 8002c00.pinctrl: initialized sunXi PIO driver
[    0.056669] sun9i-a80-mmc-config-clk 1c13000.clk: Could not get reset control
[    0.105460] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.107967] console [ttyS0] disabled
[    0.128180] 7000000.serial: ttyS0 at MMIO 0x7000000 (irq = 36, base_baud = 1500000) is a U6_16550A
[    0.792225] console [ttyS0] enabled
[    0.807215] loop: module loaded
[    0.811189] libphy: Fixed MDIO Bus: probed
[    0.815320] CAN device driver interface
[    0.819549] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.826102] ehci-platform: EHCI generic platform driver
[    0.831412] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.837612] ohci-platform: OHCI generic platform driver
[    0.843423] i2c /dev entries driver
[    0.847167] IR NEC protocol handler initialized
[    0.851716] IR RC5(x/sz) protocol handler initialized
[    0.856778] IR RC6 protocol handler initialized
[    0.861319] IR JVC protocol handler initialized
[    0.865870] IR Sony protocol handler initialized
[    0.870497] IR SANYO protocol handler initialized
[    0.875211] IR Sharp protocol handler initialized
[    0.879924] IR MCE Keyboard/mouse protocol handler initialized
[    0.885764] IR XMP protocol handler initialized
[    0.890690] Registered IR keymap rc-empty
[    0.894809] rc rc0: sunxi-ir as /devices/platform/soc/8002000.ir/rc/rc0
[    0.901586] input: sunxi-ir as /devices/platform/soc/8002000.ir/rc/rc0/input0
[    0.909333] input: MCE IR Keyboard/Mouse (sunxi-ir) as /devices/virtual/input/input1
[    0.917377] sunxi-ir 8002000.ir: initialized sunXi IR driver
[    0.923708] sunxi-wdt 6000ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    0.931787] sunxi-wdt 8001000.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    0.941258] ledtrig-cpu: registered to indicate activity on CPUs
[    0.947826] usbcore: registered new interface driver usbhid
[    0.953418] usbhid: USB HID core driver
[    0.958346] NET: Registered protocol family 17
[    0.962833] can: controller area network core (rev 20170425 abi 9)
[    0.969100] NET: Registered protocol family 29
[    0.973564] can: raw protocol (rev 20170425)
[    0.977849] can: broadcast manager protocol (rev 20170425 t)
[    0.983524] can: netlink gateway (rev 20170425) max_hops=1
[    0.989311] Key type dns_resolver registered
[    0.993727] Registering SWP/SWPB emulation handler
[    0.999162] Loading compiled-in X.509 certificates
[    1.004039] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.016294] sunxi-rsb 8003400.i2c: RSB running at 3000000 Hz
[    1.022484] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP809 found
[    1.030625] dcdc1: supplied by regulator-dummy
[    1.035454] dcdc2: supplied by regulator-dummy
[    1.040177] dcdc3: supplied by regulator-dummy
[    1.044908] dcdc4: supplied by regulator-dummy
[    1.049610] dcdc5: supplied by regulator-dummy
[    1.054313] dc1sw: supplied by vcc-3v
[    1.058213] dc5ldo: supplied by vcc-dram
[    1.062370] aldo1: supplied by regulator-dummy
[    1.067077] aldo2: supplied by regulator-dummy
[    1.071616] vcc-pb-io-cam: Bringing 2800000uV into 1800000-1800000uV
[    1.078164] aldo3: supplied by regulator-dummy
[    1.082890] eldo1: supplied by regulator-dummy
[    1.087430] vcc-dvdd-cam: Bringing 3000000uV into 1200000-1200000uV
[    1.093927] eldo2: supplied by regulator-dummy
[    1.098465] vcc-pe: Bringing 3000000uV into 1800000-1800000uV
[    1.104438] eldo3: supplied by regulator-dummy
[    1.109141] dldo1: supplied by regulator-dummy
[    1.113670] vcc-wifi: Bringing 3400000uV into 3300000-3300000uV
[    1.119836] dldo2: supplied by regulator-dummy
[    1.124540] rtc_ldo: supplied by regulator-dummy
[    1.129384] ldo_io0: supplied by regulator-dummy
[    1.134122] vcc-pg: Bringing 3800000uV into 3000000-3000000uV
[    1.140124] ldo_io1: supplied by regulator-dummy
[    1.144884] vcc-pa-gmac-2v5: Bringing 3800000uV into 2500000-2500000uV
[    1.151626] sw: supplied by regulator-dummy
[    1.156020] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
[    1.163369] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    1.193307] sunxi-mmc 1c0f000.mmc: base:0x(ptrval) irq:23
[    1.223609] sunxi-mmc 1c11000.mmc: base:0x(ptrval) irq:24
[    1.229100] hctosys: unable to open rtc device (rtc0)
[    1.235930] Duplicate name in testcase-data, renamed to "duplicate-name#1"
[    1.245720] ### dt-test ### start of unittest - you will see error messages
[    1.253304] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[    1.265583] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[    1.277854] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
[    1.285182] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
[    1.292512] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
[    1.300533] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
[    1.317070] OF: overlay: node_overlaps_later_cs: #6 overlaps with #7 @/testcase-data/overlay-node/test-bus/test-unittest8
[    1.328040] OF: overlay: overlay #6 is not topmost
[    1.341374] ### dt-test ### of_overlay_apply() (ret=-22), 2
[    1.347122] ### dt-test ### of_overlay_apply() (ret=-22), 3
[    1.352714] ### dt-test ### end of unittest - 190 passed, 0 failed
[    1.359078] vcc-rtc-vdd1v8-io: disabling
[    1.363028] ALSA device list:
[    1.366008]   No soundcards found.
[    1.370283] Waiting for root device /dev/mmcblk0p1...
[    1.384757] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.399496] mmc0: new high speed SDHC card at address e624
[    1.406996] mmcblk0: mmc0:e624 SC16G 14.8 GiB 
[    1.417257]  mmcblk0: p1
[    1.441909] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    1.450064] VFS: Mounted root (ext4 filesystem) on device 179:1.
[    1.457287] mmc1: new DDR MMC card at address 0001
[    1.464119] mmcblk1: mmc1:0001 NCard  7.30 GiB 
[    1.470451] mmcblk1boot0: mmc1:0001 NCard  partition 1 4.00 MiB
[    1.478223] mmcblk1boot1: mmc1:0001 NCard  partition 2 4.00 MiB
[    1.494550] devtmpfs: mounted
[    1.499062] Freeing unused kernel memory: 1024K
[    1.517830]  mmcblk1: p1 p2
[    1.689649] random: fast init done
[    1.848766] systemd[1]: System time before build time, advancing clock.
[    1.953152] NET: Registered protocol family 10
[    2.010667] Segment Routing with IPv6
[    2.041246] random: systemd: uninitialized urandom read (16 bytes read)
[    2.050544] random: systemd: uninitialized urandom read (16 bytes read)
[    2.064047] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    2.082569] systemd[1]: Detected architecture arm.

Welcome to Debian GNU/Linux 9 (stretch)!

[    2.101822] systemd[1]: Set hostname to <cubieboard-4>.
[    2.253268] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[    2.290174] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
[    2.305640] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read)
[    2.316674] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
[    2.346546] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read)
[    2.415557] random: systemd: uninitialized urandom read (16 bytes read)
[    2.422574] random: systemd: uninitialized urandom read (16 bytes read)
[    2.429663] random: systemd: uninitialized urandom read (16 bytes read)
[    2.633261] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[    2.649253] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    2.663047] systemd[1]: Created slice System Slice.
[  OK  ] Created slice System Slice.
[    2.673782] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[    2.688325] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[    2.701245] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    2.719196] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Created slice User and Session Slice.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Listening on fsck to fsckd communication Socket.
[  OK  ] Listening on Journal Audit Socket.
         Mounting Debug File System...
         Mounting POSIX Message Queue File System...
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on Syslog Socket.
         Starting Journal Service...
         Starting Load Kernel Modules...
         Starting Create list of required st…ce nodes for the current kernel...
         Starting Remount Root and Kernel File Systems...
[  OK  ] Reached target Swap.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Reached target Encrypted Volumes.
[  OK  ] Reached target Remote File Systems.
[  OK  ] Reached target Slices.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Debug File System.
[  OK  ] Started Load Kernel Modules.
[  OK  ] Started Create list of required sta…vice nodes for the curre[    3.039831] EXT4-fs (mmcblk0p1): re-mounted. Opts: discard,errors=remount-ro
nt kernel.
         Starting Create Static Device Nodes in /dev...
         Starting Apply Kernel Variables...
[  OK  ] Started Remount Root and Kernel File Systems.
         Starting udev Coldplug all Devices...
         Starting Load/Save Random Seed...
[  OK  ] Started Journal Service.
[  OK  ] Started Create Static Device Nodes in /dev.
[  OK  ] Started Apply Kernel Variables.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
         Starting Raise network interfaces...
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started udev Kernel Device Manager.
[    3.608155] systemd-journald[115]: Received request to flush runtime journal from PID 1
[  OK  ] Started Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Create Volatile Files and Directories.
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[FAILED] Failed to start Raise network interfaces.
See 'systemctl status networking.service' for details.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily apt download activities.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Started Daily apt upgrade and clean activities.
[  OK  ] Started ACPI Events Check.
[  OK  ] Reached target Paths.
[  OK  ] Listening on ACPID Listen Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting System Logging Service...
         Starting LSB: Load kernel modules needed to enable cpufreq scaling...
         Starting Login Service...
[  OK  ] Started Regular background program processing daemon.
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Timers.
[  OK  ] Reached target Network.
         Starting Permit User Sessions...
         Starting OpenBSD Secure Shell server...
[  OK  ] Reached target Network is Online.
         Starting LSB: Start NTP daemon...
         Starting /etc/rc.local Compatibility...
[  OK  ] Started System Logging Service.
[  OK  ] Started Permit User Sessions.
[  OK  ] Started /etc/rc.local Compatibility.
[  OK  ] Found device /dev/ttyS0.
[  OK  ] Started OpenBSD Secure Shell server.
[  OK  ] Started Login Service.
[  OK  ] Started Serial Getty on ttyS0.
[    6.443856] input: axp20x-pek as /devices/platform/soc/8003400.i2c/sunxi-rsb-3a3/axp221-pek/input/input2
[  OK  ] Started Getty on tty1.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started LSB: Start NTP daemon.
[    6.891529] mousedev: PS/2 mouse device common for all mice
[    6.969168] random: crng init done
[  OK  ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
         Starting LSB: set CPUFreq kernel parameters...
[  OK  ] Started LSB: set CPUFreq kernel parameters.
         Starting LSB: Set sysfs variables from /etc/sysfs.conf...
[  OK  ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Started Update UTMP about System Runlevel Changes.

Debian GNU/Linux 9 cubieboard-4 ttyS0

cubieboard-4 login: localadmin
Password: 
Last login: Thu Nov  3 17:17:37 UTC 2016 on ttyS0
            _     _      _                         _       _  _   
  ___ _   _| |__ (_) ___| |__   ___   __ _ _ __ __| |     | || |  
 / __| | | | '_ \| |/ _ \ '_ \ / _ \ / _` | '__/ _` |_____| || |_ 
| (__| |_| | |_) | |  __/ |_) | (_) | (_| | | | (_| |_____|__   _|
 \___|\__,_|_.__/|_|\___|_.__/ \___/ \__,_|_|  \__,_|        |_|  
                                                                  

Welcome to Debian GNU/Linux 9 (stretch) 

Linux cubieboard-4 4.16.6 #1 SMP Wed May 2 19:15:07 CEST 2018 armv7l

System load: 0.03            Uptime:     0 min          Users:        0
Memory used: 24M of 2.0G     Swap used:  Deactivated    Usage of /:   19% of 3.7G
Processes:   19              Threads:    2 (74 kt)      Dead/Zombie:  0

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
localadmin@cubieboard-4:~$ uname -a
Linux cubieboard-4 4.16.6 #1 SMP Wed May 2 19:15:07 CEST 2018 armv7l GNU/Linux
localadmin@cubieboard-4:~$ cat /proc/interrupts 
           CPU0       
 18:       9225     GIC-0  29 Level     arch_timer
 19:          0     GIC-0  30 Level     arch_timer
 22:          0     GIC-0  50 Level     timer@06000c00
 23:      14763     GIC-0  92 Level     sunxi-mmc
 24:        287     GIC-0  94 Level     sunxi-mmc
 36:        518     GIC-0  32 Level     ttyS0
 38:          0     GIC-0  69 Level     sunxi-ir
 41:         62     GIC-0  71 Level     sunxi-rsb
188:          0  sunxi_pio_edge 146 Edge      1c0f000.mmc cd
266:          0  sunxi-nmi   0 Level     axp809
293:          0    axp809  26 Edge      axp20x-pek-dbr
294:          0    axp809  27 Edge      axp20x-pek-dbf
IPI0:          0  CPU wakeup interrupts
IPI1:          0  Timer broadcast interrupts
IPI2:          0  Rescheduling interrupts
IPI3:          0  Function call interrupts
IPI4:          0  CPU stop interrupts
IPI5:          0  IRQ work interrupts
IPI6:          0  completion interrupts
Err:          0
localadmin@cubieboard-4:~$ lsmod  od
Module                  Size  Used by
cpufreq_userspace      16384  0
cpufreq_powersave      16384  0
mousedev               20480  0
cpufreq_ondemand       16384  0
cpufreq_conservative    16384  0
axp20x_pek             16384  0
ip_tables              24576  0
x_tables               32768  1 ip_tables
sha256_generic         20480  0
sha256_arm             24576  8
ipv6                  454656  30
autofs4                45056  0
localadmin@cubieboard-4:~$

Le système est fonctionnel, au détail prês qu'un seul CPU est détecté...
Soit une option du noyau, soit une option du DTB ???
:twisted:
Cordialement
jeanmarc
Posts: 132
Joined: Sun Mar 22, 2020 5:28 pm
Location: Essonne

Re: [cubie4] [dft+Debian Stretch 9.4] kernel 4.16.6

Post by jeanmarc »

Bonjour,

La suite de la saga de la cubie 4 est disponible ici

https://forum.armwizard.org/viewtopic.php?f=21&t=105


Cordialement
Cordialement
Post Reply